MCH5908

Ordering number : ENA1218 MCH5908 SANYO Semiconductors DATA SHEET N-Channel Silicon Junction FET MCH5908 Features • • High-Frequency Amplifier, AM Amplifier, Low-Frequency Amplifier Applications Composite type with 2 J-FET contained in a MCPH5 package currently in use, improving the mounting efficiency greatly. The MCH5908 is formed with two chips, being equivalent to the 2SK3557, placed in one package. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Drain-to-Source Voltage Gate-to-Drain Voltage Gate Voltage Drain Current Allowable Power Dissipation Total Power Dissipation Junction Temperature Storage Temperature Symbol VDSX VGDS IG ID PD PT Tj Tstg 1 unit Conditions Ratings 15 --15 10 50 200 300 150 --55 to +150 Unit V V mA mA mW mW °C °C Electrical Characteristics at Ta=25°C Parameter Gate-to-Drain Breakdown Voltage Gate-to-Source Leakage Current Cutoff Voltage Drain Current Symbol V(BR)GDS IGSS VGS(off) IDSS Conditions IG=- μA, VDS=0V -10 VGS=--10V, VDS=0V VDS=5V, ID=100μA VDS=5V, VGS=0V --0.3 10.0* --0.7 Ratings min --15 --1.0 --1.5 32.0* typ max Unit V nA V mA The specifications shown above are for each individual J-FET. * : The MCH5908 is classified by IDSS as follows (unit : mA). Marking KG KH Rank G H IDSS(mA) 10 to 20 16 to 32 Continued on next page. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network 22410AC TK IM TC-00002292 No. A1218-1/4 MCH5908 Continued from preceding page. Parameter Forward Transfer Admittance Input Capacitance Reverse Transfer Capacitance Noise Figure Symbol ⏐yfs⏐ Ciss Crss NF Conditions VDS=5V, VGS=0V, f=1kHz VDS=5V, VGS=0V, f=1MHz VDS=5V, VGS=0V, f=1MHz VDS=5V, Rg=1kΩ, ID=1mA, f=1kHz Ratings min 24 typ 35 10.5 3.5 1.0 max Unit mS pF pF dB Package Dimensions unit : mm (typ) 7021A-009 Marking 5 4 K 0.25 2.0 0.15 1 2 3 1 : Drain1 2 : Source1/Source2 3 : Drain2 4 : Gate2 5 : Gate1 5 4 0 to 0.02 2.1 1.6 0.25 1 0.65 2 3 0.3 0.85 1 2 3 1 : Drain1 2 : Source1/Source2 3 : Drain2 4 : Gate2 5 : Gate1 SANYO : MCPH5 0.07 5 4 Electrical Connection 5 4 1 : Drain1 2 : Source1/Source2 3 : Drain2 4 : Gate2 5 : Gate1 3 Top view 1 2 20 ID -- VDS Rank 20 ID -- VDS VGS=0V 16 Drain Current, ID -- mA Drain Current, ID -- mA V GS=0 V 16 --0.1V 12 12 --0.1V --0.2V --0.3V --0.2V 8 8 --0.3V 4 --0.4V --0.7V 4 --0.4V --0.7V --0.5V --0.6V 6 8 10 12 ITR02750 --0.6V 1.2 --0.5V 0 1.6 2.0 2.4 ITR02749 0 2 0 0 0.4 0.8 4 Drain-to-Source Voltage, VDS -- V Drain-to-Source Voltage, VDS -- V No. A1218-2/4 MCH5908 22 20 18 ID -- VGS VDS=5V 16 14 ID -- VGS VDS=5V IDSS=15mA Drain Current, ID -- mA Drain Current, ID -- mA 16 14 12 10 8 6 4 12 10 8 6 4 2 30 mA ID SS = 20 m 15 A mA Ta =-25 --1.0 --0.8 --0.6 --0.4 °C 25 10 mA 2 0 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0.2 IT04224 100 0 --1.2 --0.2 0 0.2 Gate-to-Source Voltage, VGS -- V 7 ⏐yfs⏐ -- ID Gate-to-Source Voltage, VGS -- V °C 75° C ITR02752 ⏐yfs⏐ -- IDSS Forward Transfer Admittance, ⏐yfs⏐ -- mS 5 30m 3 2 A Forward Transfer Admittance, ⏐yfs⏐ -- mS VDS=5V f=1kHz = I DSS A 15m 7 VDS=5V VGS=0V f=1kHz 5 10 7 5 3 2 3 2 3 5 7 1.0 2 3 5 7 10 2 3 5 10 7 10 2 3 5 IT04226 Drain Current, ID -- mA 3 IT04225 3 Drain Current, IDSS -- mA VGS(off) -- IDSS VDS=5V ID=100μA Ciss -- VDS VGS=0V f=1MHz Cutoff Voltage, VGS(off) -- V Input Capacitance, Ciss -- pF 2 2 1.0 10 7 7 5 5 3 7 10 2 3 5 IT04227 3 1.0 2 3 5 7 10 2 3 Drain Current, IDSS -- mA 10 Drain-to-Source Voltage, VDS -- V 10 IT13691 Crss -- VDS VGS=0V f=1MHz NF -- f Reverse Transfer Capacitance, Crss -- pF 7 8 5 VDS=5V ID=1mA Rg=1kΩ Noise Figure, NF -- dB 2 3 5 7 2 3 IT13692 6 3 4 2 2 1.0 1.0 10 0 0.01 23 5 7 0.1 23 5 7 1.0 23 5 7 10 23 Drain-to-Source Voltage, VDS -- V Frequency, f -- kHz 5 7100 ITR02758 No. A1218-3/4 MCH5908 Allowable Power Dissipation, PT, PD -- mW 10 NF -- Rg VDS=5V ID=1mA f=1kHz 350 PT, PD -- Ta PT Total power dissipation 300 8 Noise Figure, NF -- dB 250 6 200 PD 1unit 4 150 100 2 50 0 0 0 0.1 23 5 7 1.0 23 5 7 10 23 5 7 100 23 Signal Source Resistance, Rg -- kΩ 5 71000 ITR02759 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- °C IT15408 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of February, 2010. Specifications and information herein are subject to change without notice. PS No. A1218-4/4