MCH6202

Ordering number : EN6480B MCH6102 / MCH6202 MCH6102 / MCH6202 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). High allowable power dissipation. Specifications ( ) : MCH6102 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--30)40 (--)30 (--)5 (--)1.5 (--)3 (--)300 1.0 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)30V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)300mA VCB=(--)10V, f=1MHz Ratings min typ max (--)0.1 (--)0.1 200 (450)500 (9)8 560 MHz pF Unit µA µA Marking: MCH6102: AB, MCH6202: CB Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company http://semicon.sanyo.com/en/network TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2005EA MS IM TB-00001962 / D1004 TS IM TB-00000347 / 83100TS (KOTO) TA-2843 No.6480-1/5 MCH6102 / MCH6202 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)750mA, IB=(--)15mA IC=(--)750mA, IB=(--)15mA IC=(--)10µA, IE=0A IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0A See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (-30)40 (-)30 (--)5 (37)35 (115)205 (26)32 Ratings min typ (--250)150 (--)0.85 max (--375)225 (--)1.2 Unit mV V V V V ns ns ns Package Dimensions unit : mm 7022-007 Bottom View 0.25 Switching Time Test Circuit IB1 IB2 0.3 0.15 INPUT PW=20µs D.C.≤1% 50Ω RB VR + 100µF OUTPUT RL=16Ω + 470µF VCC=12V 4 2.1 1.6 5 6 0.25 0.07 3 0.65 2 1 2.0 6 5 4 0.85 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector SANYO : MCPH6 VBE= --5V 20IB1= --20IB2= IC=750mA For PNP, the polarity is reversed. 123 Top View --2.0 IC -- VCE MCH6102 --8mA --6mA --50mA --40mA --30mA --20mA --15mA --10mA 2.0 IC -- VCE mA MCH6202 30mA 8mA 20mA 15mA 10mA 6mA 4mA Collector Current, IC -- A --1.2 Collector Current, IC -- A --1.6 1.6 40mA 1.2 --0.8 0.8 --4mA --0.4 50 2mA 0.4 --2mA 0 0 --200 --400 --600 --800 IB=0mA --1000 IT01872 0 0 IB=0mA 200 400 600 800 1000 IT01873 Collector-to-Emitter Voltage, VCE -- mV --1.6 --1.4 IC -- VBE Collector-to-Emitter Voltage, VCE -- mV 1.6 1.4 IC -- VBE MCH6102 VCE= --2V MCH6202 VCE=2V Collector Current, IC -- A --1.2 --1.0 --0.8 --0.6 Collector Current, IC -- A 1.2 1.0 0.8 0.6 Ta=75 °C --0.4 --0.2 0 0 --0.2 --0.4 Ta=7 5° 25°C --25°C 0.4 0.2 0 --0.6 --0.8 --1.0 IT01874 0 0.2 0.4 0.6 0.8 --25°C C 25°C 1.0 IT01875 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V No.6480-2/5 MCH6102 / MCH6202 1000 7 5 hFE -- IC MCH6102 VCE= --2V Ta=75°C 1000 7 5 hFE -- IC MCH6202 VCE=2V Ta=75°C 25°C --25°C DC Current Gain, hFE 2 25°C --25°C DC Current Gain, hFE 2 3 5 7 --1.0 2 3 3 3 2 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A --1000 7 IT01876 1000 VCE(sat) -- IC Collector Current, IC -- A IT01877 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV MCH6102 IC / IB=20 7 5 3 2 MCH6202 IC / IB=20 5 3 2 --100 7 5 3 2 100 7 5 3 2 C 75° Ta= 5°C --2 25°C = Ta °C 75 C 5° --2 25°C --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A --1000 7 IT01878 1000 7 VCE(sat) -- IC Collector Current, IC -- A IT01879 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 MCH6102 IC / IB=50 5 3 2 MCH6202 IC / IB=50 --100 7 5 3 2 100 7 5 3 2 Ta= C 75° °C --25 25°C 7 Ta= 5°C °C --25 25°C --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A --10000 IT01880 10000 VBE(sat) -- IC Collector Current, IC -- A IT01881 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 7 5 3 2 MCH6102 IC / IB=50 7 5 3 2 MCH6202 IC / IB=50 --1000 7 5 3 2 Ta= --25°C 1000 7 5 3 2 Ta= --25°C 75°C 75°C 25°C 25°C --100 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A IT01882 Collector Current, IC -- A IT01883 No.6480-3/5 MCH6102 / MCH6202 5 3 Cob -- VCB MCH6102 f=1MHz 5 3 Cob -- VCB MCH6202 f=1MHz Output Capacitance, Cob -- pF 100 7 5 3 2 10 7 5 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 Output Capacitance, Cob -- pF 2 2 100 7 5 3 2 10 7 5 3 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 1000 IT01884 1000 f T -- IC Collector-to-Base Voltage, VCB -- V IT01885 f T -- IC Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 7 5 MCH6102 VCE= --10V 7 5 MCH6202 VCE=10V 3 2 3 2 100 7 5 3 2 --0.01 2 3 5 7 2 3 5 7 100 7 5 3 2 0.01 2 3 5 7 2 3 5 7 1.0 IT01887 --0.1 Collector Current, IC -- A --1.0 IT01886 0.1 ASO 10 Collector Current, IC -- A 1.4 5 3 2 PC -- Ta ICP=3A 10 MCH6102 / MCH6202 50 Collector Current, IC -- A 1.0 7 5 3 2 0.1 7 5 3 2 DC 10 op er m 0m s Collector Dissipation, PC -- W IC=1.5A 1.2 s 0µ s 0µ s 1ms 1.0 M ou ati nte on 0.8 do na ce ram 0.6 ic bo ard (6 0.01 0.1 MCH6102 / MCH6202 Ta=25°C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 0.4 00 mm 2 !0 0.2 0 5 7 100 IT01888 0 20 40 60 80 100 120 .8m m) 140 160 Collector-to-Emitter Voltage, VCE -- V Ambient Temperature, Ta -- °C IT01889 No.6480-4/5 MCH6102 / MCH6202 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No.6480-5/5