MCH6203

Ordering number : ENN6611A MCH6103 / MCH6203 MCH6103 / MCH6203 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). High allowable power dissipation. Specifications ( ) : MCH6103 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--50)80 (--50)80 (--)50 (--)5 (--)1.0 (--)3 200 1.0 150 --55 to +150 Unit V V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)10V, IC=(--)300mA VCB=(--)10V, f=1MHz 200 420 (9)6 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit µA µA Marking : MCH6103 : AC, MCH6203 : CC Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1004 TS IM TB-00000351 / N2000TS (KOTO) TA-2974 No.6611-1/5 MCH6103 / MCH6203 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)500mA, IB=(--)10mA IC=(--)300mA, IB=(--)6mA IC=(--)500mA, IB=(--)10mA IC=(--)10µA, IE=0 IC=(--)100µA, RBE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (-50)80 (-50)80 (-)50 (--)5 (36)38 (173)332 (28)40 Ratings min typ (--280)130 (--145)90 (--)0.81 max (--430)190 (--220)135 (--)1.2 Unit mV mV V V V V V ns ns ns Package Dimensions unit : mm 2177A 0.3 4 5 6 Switching Time Test Circuit 0.15 PW=20µs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω RB 2.1 1.6 0.25 RL 50Ω + 470µF VCC=25V 0.25 32 0.65 2.0 0.07 1 6 5 4 (Bottom view) 0.85 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector SANYO : MCPH6 + 100µF VBE= --5V IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. 1 2 3 (Top view) --1.0 IC -- VCE MCH6103 1.0 IC -- VCE MCH6203 10mA 0 --4 mA --3 0mA --0.8 mA --20 Collector Current, IC -- A Collector Current, IC -- A --8m --0.6 A A --6m A --10m --4mA 0.8 30mA 40mA 20mA 8mA 6mA 4mA 0.6 --0.4 --2mA --1mA 2mA 0.4 1mA 0.2 --0.2 0 0 --200 --400 --600 --800 IB=0 --1000 IT01890 0 0 IB=0 200 400 600 800 1000 IT01891 Collector-to-Emitter Voltage, VCE -- mV Collector-to-Emitter Voltage, VCE -- mV No.6611-2/5 MCH6103 / MCH6203 --1.0 --0.9 --0.8 IC -- VBE MCH6103 VCE= --2V 1.0 0.9 0.8 IC -- VBE MCH6203 VCE=2V Collector Current, IC -- A Collector Current, IC -- A --0.7 --0.6 --0.5 0.7 0.6 0.5 Ta=75° C 25°C --25°C Ta=75 °C 0 0.2 0.4 0.6 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4 0.4 0.3 0.2 0.1 0 --0.6 --0.8 --1.0 IT01892 1000 25°C --25°C 0.8 1.0 IT01893 Base-to-Emitter Voltage, VBE -- V 1000 7 5 hFE -- IC 25°C Base-to-Emitter Voltage, VBE -- V hFE -- IC 25°C MCH6103 VCE= --2V 7 5 Ta=75°C --25°C MCH6203 VCE=2V Ta=75°C DC Current Gain, hFE 2 --25°C DC Current Gain, hFE 2 3 5 7 3 3 2 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 Collector Current, IC -- A --1000 7 --1.0 IT01894 10 0.01 2 3 5 7 0.1 2 3 5 VCE(sat) -- IC Collector Current, IC -- A 1000 7 1.0 IT01895 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV MCH6103 IC / IB=20 7 5 3 2 MCH6203 IC / IB=20 5 3 2 --100 7 5 3 2 100 7 5 3 2 Ta °C =75 --2 5° C 25°C 7 Ta= 5°C 5°C --2 25°C --10 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A --10000 7 5 3 2 --1.0 IT01896 7 10 0.01 2 3 5 7 0.1 2 3 5 VCE(sat) -- IC Collector Current, IC -- A 10000 7 5 3 2 7 1.0 IT01897 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV MCH6103 IC / IB=50 MCH6203 IC / IB=50 1000 7 5 3 2 100 7 5 3 2 10 0.01 2 3 5 7 2 3 5 7 1.0 IT01899 5°C Ta=7 C --25° 25°C 5°C Ta=7 C --25° 25°C Collector Current, IC -- A --1.0 IT01898 0.1 Collector Current, IC -- A No.6611-3/5 MCH6103 / MCH6203 --10000 VBE(sat) -- IC MCH6103 IC / IB=50 10000 VBE(sat) -- IC MCH6203 IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 7 5 3 2 7 5 3 2 --1000 7 5 3 2 Ta= --25°C 1000 7 5 3 2 Ta= --25°C 75°C 25°C 75°C 25°C --100 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A 5 3 --1.0 IT01900 7 100 0.01 2 3 5 7 0.1 2 3 5 Cob -- VCB Collector Current, IC -- A 5 3 7 1.0 IT01901 Cob -- VCB MCH6103 f=1MHz Output Capacitance, Cob -- pF MCH6203 f=1MHz Output Capacitance, Cob -- pF 2 100 7 5 3 2 10 7 5 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 2 100 7 5 3 2 10 7 5 3 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 1000 IT01902 1000 f T -- IC Collector-to-Base Voltage, VCB -- V IT01903 f T -- IC Gain-Bandwidth Product, f T -- MHz 7 5 Gain-Bandwidth Product, f T -- MHz MCH6103 VCE= --10V 7 5 MCH6203 VCE=10V 3 3 2 2 100 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A --1.0 IT01904 7 100 0.01 2 3 5 7 0.1 2 3 5 ASO Collector Current, IC -- A 1.4 7 1.0 IT01905 5 3 2 PC -- Ta ICP=3A IC=1A 1.0 7 5 3 2 0.1 7 5 3 2 Collector Dissipation, PC -- W Collector Current, IC -- A MCH6103 / MCH6203 50 0µ s 10 ms 10 0m s 1ms DC op er ati on s 0µ 10 MCH6103 / MCH6203 1.2 1.0 M ou nte 0.8 do na ce ram 0.6 ic bo ard (6 0.4 00 0.01 0.1 Ta=25°C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 mm 2 !0 0.2 0 5 7 100 IT01906 0 20 40 60 80 100 120 .8m m) 140 160 Collector-to-Emitter Voltage, VCE -- V Ambient Temperature, Ta -- °C IT01907 No.6611-4/5 MCH6103 / MCH6203 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2004. Specifications and information herein are subject to change without notice. PS No.6611-5/5