MCH6605

Ordering number:ENN6460 P-Channel Silicon MOSFET MCH6605 Ultrahigh-Speed Switching Applications Features · Low ON resistance. · Ultrahigh-speed swithcing. · 4V drive. · Composite type with 2 MOSFETs contained in one package, facilitating high-density mounting. Package Dimensions unit:mm 2173 [MCH6605] 0.25 0.3 6 5 4 1.6 2.1 0.15 1 2.0 0.25 23 0.65 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW≤10µs, duty cycle≤1% Conditions 1 : Source1 2 : Gate1 3 : Drain2 4 : Source2 5 : Gate2 6 : Drain1 SANYO : MCPH6 0.15 0.85 Ratings –50 ±20 –0.14 –0.56 0.8 150 –55 to +150 Unit V V A A W ˚C ˚C Mounted on a ceramic board (900mm2×0.8mm) 1unit Electrical Characteristics at Ta = 25˚C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Symbol V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 Ciss Coss Crss ID=–1mA, VGS=0 VDS=–50V, VGS=0 VGS=±16V, VDS=0 VDS=–10V, ID=–100µA VDS=–10V, ID=–40mA ID=–40mA, VGS=–10V ID=–20mA, VGS=–4V VDS=–10V, f=1MHz VDS=–10V, f=1MHz VDS=–10V, f=1MHz –1 50 70 17 23 6.2 4.0 1.3 22 32 Conditions Ratings min –50 –10 ±10 –2.5 typ max Unit V µA µA V mS Ω Ω pF pF pF Marking : FE Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 30300TS (KOTO) TA-2460 No.6460-1/4 MCH6605 Continued from preceding page. Parameter Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit VDS=–10V, VGS=–10V, ID=–70mA VDS=–10V, VGS=–10V, ID=–70mA VDS=–10V, VGS=–10V, ID=–70mA IS=–70mA, VGS=0 Ratings min typ 13 10 100 150 1.32 0.17 0.34 0.85 1.2 max Unit ns ns ns ns nC nC nC V Electrical Connection Switching Time Test Circuit VDD=--25V D1 G2 S2 0V --10V VIN VIN ID=--40mA RL=625Ω D VOUT PW=10µs D.C.≤1% G S1 G1 D2 P.G 50Ω S MCH6605 --0.07 ID -- VDS --8 .0V --0.14 ID -- VGS VDS=--10V 5°C Ta=-2 --1 --2 --3 .0 V Drain Current, ID – A Drain Current, ID – A --1 0 --0.04 --3.0V --0.08 --0.03 --0.06 --0.02 --0.04 VGS=--2.5V --0.01 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 --1.8 --2.0 --0.02 0 0 --4 --5 --6 IT00104 Drain-to-Source Voltage, VDS – V 50 45 IT00103 Gate-to-Source Voltage, VGS – V 100 RDS(on) -- VGS Ta=25°C Static Drain-to-Source On-State Resistance, RDS (on) – Ω RDS(on) -- ID VGS=--10V 7 Static Drain-to-Source On-State Resistance, RDS (on) – Ω 40 35 30 5 --40mA 25 20 15 10 --2 3 ID=--20mA Ta=75°C 2 25°C --25°C --3 --4 --5 --6 --7 --8 --9 --10 Gate-to-Source Voltage, VGS – V 10 --0.01 2 3 5 7 75°C --0.05 . --4 .0V 0V --0.10 25°C 2 --0.06 --6 --0.12 --0.1 3 IT00105 Drain Current, ID – A IT00106 No.6460-2/4 MCH6605 1000 7 5 RDS(on) -- ID VGS=--4V 40 35 RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS (on) – Ω Static Drain-to-Source On-State Resistance, RDS (on) – Ω 3 2 30 25 20 15 10 5 0 --60 25°C =-ID 100 7 5 3 2 V --10 S= G A, V 0m =--4 ID 20m A -S= , VG 4V Ta=75°C --25°C 10 --0.01 2 3 5 7 Drain Current, ID – A --0.1 2 3 --40 --20 0 20 40 60 80 100 120 140 160 IT00107 5 3 Ambient Temperature, Ta – ˚C IT00108 1.0 yfs -- ID VDS=--10V IF -- VSD VGS = 0 Forward Transfer Admittance, | yfs | – S 7 5 3 2 Forward Current, IF – A 2 --0.1 7 5 3 0.1 7 5 3 2 5 Ta=--2 °C 25°C 75°C 5°C 25°C 0.01 --0.01 2 3 5 7 --0.1 2 3 --0.01 --0.5 --0.6 Ta= 7 2 --0.7 --0.8 --25° C --0.9 --1.0 --1.1 --1.2 Drain Current, ID – A 1000 7 5 IT00109 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 Diode Forward Voltage, VSD – V IT00110 SW Time -- ID VDD=--25V VGS=--10V tf td(off) Ciss, Coss, Crss – pF Ciss, Coss, Crss -- VDS f=1MHz Switching Time, SW Time – ns 3 2 100 7 5 3 2 10 7 5 3 2 1.0 --0.01 2 Ciss Coss Crss td(on) tr 3 5 7 Drain Current, ID – A --0.1 IT00111 --1.0 7 5 0 --5 --10 --15 --20 --25 --30 --35 --40 --45 --50 Drain-to-Source Voltage, VDS – V IT00112 --10 --9 VGS -- Qg VDS=--10V ID=--70mA Drain Current, ID – A ASO IDP=--0.56A ≤10µs 1m s Gate-to-Source Voltage, VGS – V --8 3 2 --7 --6 --5 --4 --3 --2 2 --1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 ID=--0.14A DC 10 ms --0.1 7 5 3 10 op era 0m s Operation in this area is limited by RDS(on). Ta=25°C Single pulse 1unit 2 tio n --0.01 --1.0 Mounted on a ceramic board (900mm2×0.8mm) 3 5 7 Total Gate Charge, Qg – nC IT00113 Drain-to-Source Voltage, VDS – V --10 2 3 5 7 IT01735 No.6460-3/4 MCH6605 1.0 PD -- Ta Allowable Power Dissipation, PD – W 0.8 M ou nt ed on 0.6 ac er am ic bo 0.4 ar d( 90 0m m2 ×0 0.2 .8m m )1 un it 160 IT01736 0 0 20 40 60 80 100 120 140 Ambient Temperature, Ta – ˚C Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2000. Specifications and information herein are subject to change without notice. PS No.6460-4/4