SBJ100-06J

Ordering number : ENA0192 SBJ100-06J SBJ100-06J Applications • Schottky Barrier Diode (Twin Type · Cathode Common) 60V, 10A Rectifier High frequency rectification (switching regulators, converters, choppers). Features • • • • Small reverse current (IR typ=5µA) due to adoption of MRJ (Multi Refined PN Junction) structure. Low forward voltage (VF typ=0.55V). High temperature operation is possible (Tj=150°C). High surge breakdown voltage. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz resistive load, Sine wave Tc=110°C 50Hz sine wave, 1 cycle Conditions Ratings 60 66 10 100 --55 to +150 --55 to +150 Unit V V A A °C °C Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Thermal Resistance Symbol VR VF IR C Rth(j-c) Conditions IR=2mA, Tj=25°C* IF=5A, Tj=25°C* VR=30V, Tj=25°C* VR=60V, Tj=25°C* VR=10V, Tj=25°C* Junction-Case : Smoothed DC Ratings min 40 0.55 5 10 200 4.0 0.6 50 100 typ max Unit V V µA µA pF °C / W Note) * : Value per element Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N2505SD MS IM TB-00001904 No. A0192-1/3 SBJ100-06J Package Dimensions unit : mm 7508-001 10.0 3.2 4.5 2.8 Electrical Connection 1 3 3.5 1 : Anode 2 : Cathode 3 : Anode 2 7.2 Top view 18.1 1.6 1.2 0.75 5.6 14.0 16.0 0.7 123 2.4 1 : Anode 2 : Cathode 3 : Anode SANYO : TO-220ML 2.55 2.55 100 7 5 3 2 IF -- VF *Value per element 1.E+00 IR -- VR *Value per element 1.E--01 Forward Current, IF -- A Reverse Current, IR -- A Tj=150°C max 150°C typ ma x 15 10 7 5 3 2 1.E--02 0° C 125°C typ 100°C typ 1.E--03 typ 50°C 25°C m ax Tj=1 25°C ty 1.0 7 5 3 2 0.1 0 1.E--04 p 1.E--05 p 25°C ty 10 20 30 40 50 60 70 IT10219 0.5 1.0 1.5 IT10218 1.E--06 0 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W 8 7 6 5 4 3 2 1 0 0 2 4 Average Reverse Power Dissipation, PR(AV) -- W PF(AV) -- IO Reverse Voltage, VR -- V 12 PR(AV) -- VRM Rectangular wave θ 360° *Value per 2-element Tj=150°C (1) (2) (4) (3) 10 8 Sine wave 180° 360° (1)Rectangular wave θ=300° (2)Rectangular wave θ=240° (3)Rectangular wave θ=180° (4)Sine wave θ=180° Rectangular wave VR θ 360° (1) (2) (3) 6 Sine wave 4 180° 360° 2 VR (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 6 8 10 12 IT10220 (4) 0 0 10 20 30 40 *Value per 2-element Tj=150°C 50 60 70 IT10221 Average Output Current, IO -- A Peak Reverse Voltage, VRM -- V No. A0192-2/3 SBJ100-06J 150 140 Tc -- IO *Value per 2-element Case Temperature, Tc -- °C 130 120 110 100 90 80 70 60 50 0 2 Interterminal Capacitance, C -- pF (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 1000 7 5 C -- VR *Value per element f=100kHz 3 2 Rectangular wave θ 360° Sine wave 180° 4 360° 6 100 7 5 0.1 (1) 8 (2) (4) 10 (3) 12 IT10222 2 3 5 7 1.0 2 3 5 7 10 2 3 Average Output Current, IO -- A 120 Reverse Voltage, VR -- V 5 7 100 IT10223 Transient Thermal Resistance, Rth(j-c) -- °C / W IFSM -- t Surge Forward Current, IFSM(Peak) -- A 100 Current waveform 50Hz sine wave Tj=125°C IS 20ms t 10 7 5 Rth(j-c) -- t *Value per element 80 3 2 60 1.0 7 5 40 20 3 2 0.001 2 3 5 7 0.01 2 3 5 7 0.1 23 5 7 1.0 23 5 7 10 IT09817 0 0.01 *Value per element 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Time, t -- s IT09816 Time, t -- s Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2005. Specifications and information herein are subject to change without notice. PS No. A0192-3/3