SBS004

Ordering number:ENN6272 Schottky Barrier Diode SBS004 15V, 1A Rectifier Applications · High frequency rectification (switching regulators, converters, choppers). Package Dimensions unit:mm 1293 [SBS004] 2.9 0.4 3 Features · Low forward voltage (IF=0.5A, VF max=0.35V) (IF=1.0A, VF max=0.4V). · Ultrasmall-sized package, permitting SBS004applied sets to be compact and slim. 1 0.6 0.05 2 1.9 0.2 0.6 1.6 2.8 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle Conditions 1 : Anode 2 : No Contact 3 : Cathode SANYO : CPH3 0.7 0.9 Ratings 15 15 1 10 –55 to +125 –55 to +125 0.2 0.15 Unit V V A A ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Symbol VR VF1 VF2 IR C trr Rth(j-a) IR=1mA IF=0.5A IF=1A VR=6V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. 42 15 110 Conditons Ratings min 15 0.30 0.35 0.35 0.40 500 typ max Unit V V V µA pF ns Mounted on a ceramic board (600mm2×0.8mm) ˚C/W Marking : SC Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 73099GI (KT) No.6272–1/3 SBS004 trr Test Circuit Duty≤10% 100mA 10mA --5V 100mA 10µs 50Ω 100Ω 10Ω trr 10 7 5 IF -- VF Reverse Current, IR -- mA Forward Current, IF -- A 3 2 1.0 7 5 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0 5 IR -- VR Ta=125°C 100°C = Ta 5 12 °C 3 2 0.1 7 5 3 2 0.01 0 10 0° C ° 25 5 75 °C C 0° C 75°C 50°C 25°C 0.1 0.2 0.3 0.4 0.5 0.6 IT00622 1000 10 15 IT00623 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W 0.8 0.7 0.6 0.5 0.4 Reverse Voltage, VR -- V PF(AV) -- IO C -- VR f=1MHz Interterminal Capacitance, C -- pF 1.4 ⁄Rectangular wave θ=60° ¤Rectangular wave θ=120° ‹Rectangular wave θ=180° ›Sine wave θ=180° ⁄ ¤‹ › 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 Rectangular wave 0.3 θ 0.2 0.1 0 0 0.2 0.4 0.6 0.8 360° Sine wave 180° 360° 1.0 1.2 10 2 IT00625 Average Forward Current, IO -- A 12 IT00624 IS -- t Is Reverse Voltage, VR -- V Surge Forward Current , IFSM(Peak) -- A Current waveform 50Hz sine wave 10 8 20ms t 6 4 2 0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Time, t -- s IT00626 No.6272–2/3 SBS004 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 1999. Specifications and information herein are subject to change without notice. PS No.6272–3/3