SMA3117

Ordering number : EN8936 SMA3117 SANYO Semiconductors DATA SHEET SMA3117 Features • • • • • • Silicon MMIC Wideband Amplifier High Gain : Gp=33.5dB typ. @2.2GHz Wideband response : fu=3.0GHz Low current : ICC=22.7mA typ. High output power : Po(1dB)=5.7dBm Port impedance : input/output 50Ω Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Supply Voltage Circuit Current Allowable Power Dissipation Operating Temperature Storage Temperature Symbol VCC ICC PD Topr Tstg Conditions Ratings 6 40 280 --40 to +85 --55 to +150 Unit V mA mW °C °C Package Dimensions unit : mm (typ) 7022A-018 0.25 2.0 6 5 4 0 t o 0.02 0.15 Product & Package Information • Package : MCPH6 • JEITA, JEDEC : SC-88, SOT-363 • Minimum Packing Quantity : 3,000pcs/reel Packing Type: TL Marking LOT No. LOT No. 2.1 1.6 0.25 1 0.65 2 3 0.3 TL LG 0.85 1 2 3 1 : VCC 2 : GND 3 : OUT 4 : GND 5 : GND 6 : IN SANYO : MCPH6 0.07 6 5 4 http://semicon.sanyo.com/en/network 71311AM TKIM TC-00002627 No.8936-1/5 SMA3117 Recommended Operating Conditions at Ta=25°C Parameter Supply Voltage Operating Ambient Temperature Symbol VCC Topr Conditions Ratings min 4.5 --40 typ 5 +25 max 5.5 +85 Unit V °C Electrical Characteristics at Ta=25°C, VCC=5V, Zs=ZL=50Ω Parameter Circuit Current Power Gain Isolation Input Return Loss Output Return Loss Noise Figure Gain 1dB Compression Output Power *1 Upper Limit Operating Frequency *1 Symbol ICC Gp ISL RLin RLout NF Po(1dB) fu f=1GHz f=2.2GHz f=1GHz f=2.2GHz f=1GHz f=2.2GHz f=1GHz f=2.2GHz f=1GHz f=2.2GHz f=1GHz f=2.2GHz 3dB down below flat gain at f=1GHz 7.5 3.7 Conditions Ratings min 18.5 29.5 30.5 35.0 34.0 9.0 4.5 11.0 12.0 typ 22.7 31.2 33.5 37.6 36.5 11.2 6.0 14.3 16.3 4.1 3.9 9.8 5.7 3.0 5.0 5.0 max 28.0 32.5 35.5 Unit mA dB dB dB dB dB dBm GHz *1 : On evaluation board Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted. Test Circuit IN 100pF 6 5 4 1 2 3 100pF OUT 1000pF 100nH VCC Connect 2, 4 and 5 with GND. IT15580 No.8936-2/5 SMA3117 Evaluation Board IN C1 C2 OUT L1 C3 Symbol C1, C2 VCC Value 100pF 1000pF 100nH C3 L1 30 ICC -- VCC 25 Circuit Current, ICC -- mA 20 15 10 5 0 0 1 2 3 4 5 6 IT16522 0 Circuit Voltage, VCC -- V 40 Gp -- f RLin -- f 5.5V Input Return Loss, RLin -- dB --5 5.0V --10 Power Gain , Gp -- dB 35 5.0 V 5.5V 4.5V 4.5V 30 --15 --20 --25 25 0 1 2 3 4 IT16523 --30 0 1 2 3 4 IT16524 Frequency, f -- GHz Freqency, f -- GHz No.8936-3/5 SMA3117 0 ISL -- f Output Return Loss, RLout -- dB 0 RLout -- f --10 --5 Isolation, ISL -- dB --10 --20 4.5V --15 --30 5.0V 4.5V 5.5V 5.0 5.5V V --20 --40 --25 --50 0 1 2 3 4 IT16525 --30 0 1 2 3 4 IT16526 Freqency, f -- GHz 20 Pout -- Pin Freqency, f -- GHz 20 Pout -- Pin VCC=5V f=1GHz Output Power, Pout -- dBm VCC=5V f=2.2GHz Output Power, Pout -- dBm 10 10 0 0 --10 --10 --20 --20 --30 --60 --50 --40 --30 --20 --10 0 IT16527 --30 --60 --50 --40 --30 --20 --10 0 IT16528 Input Power, Pin -- dBm Input Power, Pin -- dBm S Parameter (VCC=5V) S11 S22 50 50 100 250 25 10 100 250 25 10 3GHz 2GHz 25 0 10 50 100 250 0 10 25 50 100 250 2GHz 1GHz 3GHz 1GHz --10 --25 --50 IT16529 --250 --100 --10 --250 --25 --50 --100 IT16530 No.8936-4/5 SMA3117 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2011. Specifications and information herein are subject to change without notice. PS No.8936-5/5