SMA5101

Ordering number : ENA1839 SMA5101 SANYO Semiconductors DATA SHEET SMA5101 Features • • • Silicon Monolithic Linear IC RF Double Balanced Mixer IC • • • Wide band : up to Ku band Low distortion : IIP3=20dBm (@ICC > 11mA) SMT, Ultra small package : 2.0×2.1×0.85mm High conversion gain : --0.5dB (@450MHz) Low voltage available : 1.2V and above Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Max Power Dissipation Operating Temperature Storage Temperature Symbol VCBO VCEO VEBO ICC PC Topr Tstg Conditions Ratings 8 6 2 50 280 --40 to +85 --55 to +150 Unit V V V mA mW °C °C Package Dimensions unit : mm (typ) 7022A-020 2.0 6 5 4 0 t o 0.02 0.15 Product & Package Information • Package : MCPH6 • JEITA, JEDEC : SC-88, SOT363 • Minimum Packing Quantity : 3,000pcs/real 0.25 Packing Type: TL Marking LOT No. LOT No. 2.1 1.6 LD 0.25 1 0.65 2 3 0.3 TL 0.85 1 2 3 1 : Base2 2 : Collector1 3 : Collector2 4 : Emitter2 5 : Emitter1 6 : Base1 SANYO : MCPH6 Equivalent Circuit 0.07 1 2 6 5 4 6 3 5 4 IT15506 http://semicon.sanyo.com/en/network O0610AM TK IM TC-00002495 No. A1839-1/5 SMA5101 Recommended Operating Conditions at Ta=25°C Parameter Symbol VC1E1 Supply Voltage VC2E1 VC1E2 VC2E2 Conditions Ratings min 1.2 1.2 1.2 1.2 typ 3 3 3 3 max 6 6 6 6 Unit V V V V Electrical Characteristics at Ta=25°C Parameter Symbol IC1B1O Collector Cutoff Current IC2B1O IC1B2O IC2B2O IE1B1O Emitter Cutoff Current IE2B1O IE1B2O IE2B2O hFE1 DC Current Gain hFE2 hFE3 hFE4 Conversion Gain *1 Gc VC1B1=5V VC2B1=5V VC1B2=5V VC2B2=5V VE1B1=1V VE2B1=1V VE1B2=1V VE2B2=1V VC1E1=1V, IC1E1=3mA VC2E1=1V, IC2E1=3mA VC1E2=1V, IC1E2=3mA VC2E2=1V, IC2E2=3mA VCC=5V, ICC=6mA, f(RF)=450MHz, f(LO)=500MHz, P(RF)=--15dBm, P(LO)=--6dBm VCC=5V, ICC=6mA, f(RF1)=450MHz, f(RF2)=451MHz, f(LO)=500MHz, P(RF1)=P(RF2)=--15dBm, P(LO)=--6dBm --0.5 dB 20 20 20 20 Conditions Ratings min typ max 1 1 1 1 1 1 1 1 120 120 120 120 Unit μA μA μA μA μA μA μA μA Input Intercept Point *1 IIP3 15 dBm *1 : On evaluation board Measurement Circuit VCC Balun RF SMA5101 Balun 0.1μF LD 0.1μF IF Balun 10kΩ 0.1μF 0.1μF VB LO IT15507 No. A1839-2/5 SMA5101 Evaluation Board T1 RF IC T3 C4 IF C3 T2 R1 R2 VCC C2 C1 VB LO IC : SMA5101 T1 to T3 : Balun C1 to C4 : 0.1μF R1 : 10kΩ R2 : 0Ω (short) IT15508 Circuit Example (Self Bias) Balun RF SMA5101 Balun 0.1μF IF LD 0.1μF Rbias Balun VCC 0.1μF 0.1μF LO IT15509 No. A1839-3/5 SMA5101 10 P1dB -- ICC VCC=5V f(RF)=450MHz f(LO)=500MHz m 10 Gc -- ICC VCC=5V f(RF)=450MHz f(LO)=500MHz P(RF)= --15dBm 5 5 P1dB -- dBm Gc -- dB 0 P(L = O) dB --3 d --6 Bm 0 P(LO)= --3dBm 0dBm --5 --6dBm 0d Bm --5 --10 0 5 10 15 20 25 IT15976 --10 0 5 10 15 20 25 IT15977 Collector Current, ICC -- mA 25 IIP3 -- ICC Bm Collector Current, ICC -- mA 20 IIP3 -- dBm 15 P( LO )= d --6 0d --3 dB m Bm 10 5 0 VCC=5V f(RF1)=450MHz f(RF2)=451MHz f(LO)=500MHz P(RF)= --15dBm 0 5 10 15 20 25 IT15978 Collector Current, ICC -- mA No. A1839-4/5 SMA5101 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of October, 2010. Specifications and information herein are subject to change without notice. PS No. A1839-5/5