SPA13003

Ordering number : ENA1402 SPA13003 SANYO Semiconductors DATA SHEET SPA13003 (13003 series) Features • • • • NPN Triple Diffused Planar Silicon Transistor Switching Regulator Applications High breakdown voltage. High-speed switching. Wide ASO. Adoption of MBIT process. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg PW≤300μs, duty cycle≤10% Conditions Ratings 700 700 400 8 1 2 0.5 0.6 150 -55 to +150 Unit V V V V A A A W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Symbol ICBO IEBO hFE1 hFE2 hFE3 Conditions VCB=400V, IE=0A VEB=5V, IC=0A VCE=5V, IC=0.1A VCE=5V, IC=0.5A VCE=5V, IC=1mA 15 5 7 Ratings min typ max 10 10 35 Unit μA μA Continued on next page. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network 21209CB MS IM TC-00001819 No. A1402-1/4 SPA13003 Continued from preceding page. Parameter Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Symbol fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions VCE=10V, IC=0.1A VCB=10V, f=1MHz IC=0.5A, IB=0.1A IC=0.5A, IB=0.1A IC=1mA, IE=0A IC=100μA, RBE=0Ω IC=5mA, RBE=∞ IE=1mA, IC=0A IC=0.5A, IB1=0.05A, IB2=-0.5A, RL=400Ω, VCC=200V IC=0.5A, IB1=0.05A, IB2=-0.5A, RL=400Ω, VCC=200V IC=0.5A, IB1=0.05A, IB2=-0.5A, RL=400Ω, VCC=200V 700 700 400 8 1.0 1.0 0.3 Ratings min typ 20 10 0.8 0.5 max Unit MHz pF V V V V V V μs μs μs Package Dimensions unit : mm (typ) 7524-004 Switching Time Test Circuit IB1 IB2 VR 50Ω RB OUTPUT PW=20μs D.C.≤1% 4.0 2.2 INPUT 1.8 3.0 RL 0.4 0.5 0.6 + 100μF + 470μF VCC=200V 1 1.3 0.7 2 3 1.3 15.0 0.4 0.4 VBE= --5V 1 : Emitter 2 : Collector 3 : Base SANYO : SPA 3.0 3.8 0.7 1.0 IC -- VCE 0m 150mA 1.0 IC -- VBE VCE=5V A 20 0.9 Collector Current, IC -- A Collector Current, IC -- A 0.8 100mA 0.8 0.7 0.6 0.5 0.4 0.6 50mA 40mA 30mA 20mA 0.4 20° C 0.3 0.2 0.1 10mA 0.2 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 IB=0mA 4.5 5.0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT13701 Collector-to-Emitter Voltage, VCE -- V IT13700 Base-to-Emitter Voltage, VBE -- V Ta= 1 A 70mA 60mA 90mA 80m --40° C No. A1402-2/4 25°C SPA13003 7 5 hFE -- IC VCE=0.7V Ta=120°C 7 5 hFE -- IC VCE=5V Ta=120°C 3 DC Current Gain, hFE 25°C 2 DC Current Gain, hFE 3 25°C 2 --40°C 10 7 5 --40°C 10 7 5 3 2 0.001 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 IT13702 7 5 3 0.001 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 IT13703 Collector Current, IC -- A 3 Cob -- VCB Collector Current, IC -- A VCE(sat) -- IC f=1MHz Collector-to-Emitter Saturation Voltage, VCE(sat) -- V IC / IB=5 Output Capacitance, Cob -- pF 2 3 2 1.0 7 5 3 2 0.1 7 5 3 0.01 2 3 5 10 7 5 25 °C 3 2 1.0 2 Ta=1 0°C °C --40 2 3 5 7 1.0 IT13705 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 3 100 IT13704 7 7 0.1 VBE(sat) -- IC Collector Current, IC -- A 1.0 SW Time -- IC IC / IB=5 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 7 Switching Time, SW Time -- μs 2 IC / IB1=10 IB2 / IB1=10 R Load 5 3 1.0 Ta= --40°C 7 5 tst g 2 tf 25°C 120°C 0.1 7 3 0.01 2 3 5 7 0.1 2 3 5 5 3 2 Forward Bias A S O ICP=2A IC=1A Collector Current, IC -- A 1.0 IT13706 7 5 0.1 2 3 5 7 3 2 Reverse Bias A S O Collector Current, IC -- A 1.0 IT13707 Collector Current, IC -- A Collector Current, IC -- A 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 L=500μH IB2= --0.2A Ta=25°C Single pulse 10 s 0μ 30 10 DC op s 0μ s 1m m s er ati on 0.001 0.1 Ta=25°C Single pulse 23 5 7 1.0 23 5 7 10 23 5 7 100 23 57 2 0.01 100 2 3 5 7 Collector-to-Emitter Voltage, VCE -- V IT14369 Collector-to-Emitter Voltage, VCE -- V 1000 IT14417 No. A1402-3/4 SPA13003 0.7 0.6 PC -- Ta Collector Dissipation, PC -- W 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- °C IT14370 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of February, 2009. Specifications and information herein are subject to change without notice. PS No. A1402-4/4