STK4046V

Ordering number : EN4594A Thick Film Hybrid IC STK4046V AF Power Amplifier (Split Power Supply) (120 W min, THD = 0.08%) Features • Compact packaging supports slimmer set designs. • Series designed from 20 up to 100 W (200 W) and pincompatibility (120 to 200 W have 18 pins.) • Simpler heat sink design facilitates thermal design of slim stereo sets. • Current mirror circuit application reduces distortion to 0.08%. • Supports addition of electronic circuits for thermal shutdown and load-short protection circuit as well as pop noise muting which occurs when the power supply switch is turned on and off. Package Dimensions unit : mm 4051A [STK4046V] Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Symbol VCC max θj-c Tj Tc Tstg Conditions Ratings ±80 1.3 150 125 –30 to +125 Unit V °C/W °C °C °C Recommended Operating Conditions at Ta = 25°C Parameter Recommended supply voltage Load resistance Symbol VCC RL Conditions Ratings ±55 8 Unit V Ω SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN N3096HA (OT)/72994TH (OT) 5-2611 No. 4594-1/3 STK4046V Operating Characteristics at Ta = 25°C, VCC = ±55 V, RL = 8 Ω (noninductive load), VG = 40 dB, Rg = 600 Ω, 100 k LPF ON Parameter Quiescent current Output power Total harmonic distortion Frequency response Input resistance Output noise voltage Neutral voltage Symbol ICCO PO THD fL, fH ri VNO* VN VCC = ±66 V THD = 0.08%, f = 20 Hz to 20 kHz PO = 1.0 W, f = 1 kHz +0 PO = 1.0 W, –3 dB PO = 1.0 W, f = 1 kHz VCC = ±66 V, Rg = 10 kΩ VCC = ±66 V –70 0 20 to 50 k 55 1.2 +70 Conditions min 15 120 0.08 typ max 120 Unit mA W % Hz kΩ mVrms mV Note: Use rated power supply for test unless otherwise specified. * Output noise voltage represents the peak value on the rms scale (VTVM). The noise voltage waveform does not include the pulse noise. Specified Transformer Power Supply (MG-250 equivalent) Equivalent Circuit No. 4594-2/3 STK4046V Application Circuit: Single-Channel 120 W min. AF Power Amplifier s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. s Anyone purchasing any products described or contained herein for an above-mentioned use shall: x Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use:  Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 1996. Specifications and information herein are subject to change without notice. No. 4594-3/3