TT2148

Ordering number : ENN0000 TT2148 NPN Triple Diffused Planar Silicon Transistor TT2148 Switching Regulator Applications Preliminary Features • • • • Package Dimensions unit : mm 2022A [TT2148] 3.5 15.6 14.0 3.2 4.8 2.0 High breakdown voltage and high reliability. Fast switching speed. Wide ASO. Adoption of MBIT process. 2.6 1.6 2.0 1.3 20.0 1.2 15.0 20.0 0.6 1.0 1 0.6 2 3 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PB Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg PW≤300µs, Duty Cycle≤10% Conditions 5.45 1.4 5.45 Ratings 500 400 7 12 20 3.5 2.5 Unit V V V A A A W W °C °C Tc=25°C 80 150 --55 to +150 Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current Symbol ICBO IEBO Conditions VCB=400V, IE=0 VEB=5V, IC=0 Ratings min typ max 10 10 Unit µA µA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 51402 TS IM SAWADA No.0000-1/4 TT2148 Continued from preceding page. Parameter Symbol hFE1 hFE2 hFE3 fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf M 20 to 40 N 30 to 50 Conditions VCE=5V, IC=1.2A VCE=5V, IC=6A VCE=5V, IC=1mA VCE=10V, IC=1.2A VCB=10V, f=1MHz IC=6A, IB=1.2A IC=6A, IB=1.2A IC=1mA, IE=0 IC=5mA, RBE=∞ IE=1mA, IC=0 IC=7A, IB1=1.4A, IB2=--2.8A, RL=28.6Ω, VCC=200V IC=7A, IB1=1.4A, IB2=--2.8A, RL=28.6Ω, VCC=200V IC=7A, IB1=1.4A, IB2=--2.8A, RL=28.6Ω, VCC=200V 500 400 7 0.5 2.5 0.3 Ratings min 20* 10 10 20 120 0.8 1.5 MHz pF V V V V V µs µs µs typ max 50* Unit DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time * : The hFE1 of the TT2148 is classified as follows. Rank hFE Switching Time Test Circuit IB1 INPUT PW=20µs D.C.≤1% 50Ω VR + 100µF VBE= --5V + 470µF VCC=200V IB2 RB OUTPUT RL 10 9 IC -- VCE 900 mA 800mA 12 IC -- VBE(on) VCE=5V Collector Current, IC -- A 7 6 5 4 400mA 300mA 200mA 100mA Collector Current, IC -- A IB=0 9 10 100 8 700mA 600mA 500mA A 0m 10 8 6 3 2 1 0 0 1 2 3 4 5 6 7 8 4 2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 IT05070 Collector-to-Emitter Voltage, VCE -- V 10 7 IT05069 100 Base-to-Emitter ON-State Voltage, VBE(on) -- V VBE(sat) -- IC IC / IB=5 hFE -- IC VCE=5V Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 7 5 2 DC Current Gain, hFE 5 70.01 23 5 7 0.1 23 5 7 1.0 23 5 7 10 IT05071 3 3 1.0 7 5 3 2 2 10 7 0.01 0.1 0.001 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A Collector Current, IC -- A 5 7 10 2 IT05072 No.0000-2/4 TT2148 1.0 7 VCE(sat) -- IC IC / IB=5 5 3 2 Forward Bias ASO ICP=20A IC=12A †50 s Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 0s 10 5 Collector Current, IC -- A 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 DC op era tio 1m n s 10 ms S/ B m Li 0.1 7 5 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 IT05073 ite d 0.01 1.0 Tc=25¡C Single pulse 2 3 5 7 10 2 3 5 7 100 2 3 5 7 Collector Current, IC -- A 5 3 2 Reverse Bias ASO Collector-to-Emitter Voltage, VCE -- V 3.0 IT05074 PC -- Ta ICP 10 7 5 3 2 1.0 7 5 3 2 Collector Dissipation, PC -- W 2.5 Collector Current, IC -- A 2.0 1.5 No he at sin k 1.0 0.1 1.0 Tc=25¡C IB2= --1.8A Const L=100 H 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05075 0.5 0 0 20 40 60 80 100 120 140 160 Collector-to-Emitter Sustain Voltage, VCEX(sus) -- V 90 80 Ambient Temperature, Ta -- ¡C IT05076 PC -- Tc Collector Dissipation, PC -- W 70 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160 Case Temperature, Tc -- ¡C IT05077 No.0000-3/4 TT2148 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 2002. Specifications and information herein are subject to change without notice. PS No.0000-4/4