VS912SL

Ordering number : ENA1506 VS912SL SANYO Semiconductors DATA SHEET VS912SL Applications • • • • • • Low Capacitance TVS Diode Array Protection Device of High-speed Data Lines HDMI. USB 2.0. Mobile communication. Ethernet. LCD, camera. Notebooks and desktop computers, peripherals. Features • • • Very low capacitance 0.4pF typ. ESD / transient protection of high-speed data lines in applications according to: IEC61000-4-2 (ESD): ±20kV (air) ±20kV (contact), IEC61000-4-4 (EFT): 50A (5/50ns). Halogen free compliance. Specifications Absolute Maximum Ratings at Ta=25°C Parameter ESD Discharge *1 Peak Pulse Current *2 Operating Temperature Range Storage Temperature Symbol VESD Ipp Top Tstg contact Tp=8/20μs Conditions Ratings 20 3 --40 to +125 --55 to +150 Unit kV A °C °C Note : *1 VESD according to IEC61000-4-2 *2 Ipp according to IEC61000-4-5 Marking : Z1 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network O2809RV TK IM TC-00002059 No. A1506-1/4 VS912SL Electrical Characteristics at Ta=25°C Parameter Reverse Working Voltage Breakdown Voltage Reverse Current Clamping Voltage Forward Clamping Voltage Line Capacitance Symbol VRWM V(BR) IR VCL VFC CT Conditions Ratings min 6 50 10 12 2 4 0.4 0.2 13 15 4 6 0.6 0.3 typ max 5.3 I(BR)=1mA, (I/O to GND) VR=5.3V, (I/O to GND) Ipp=1A, Tp=8/20μs, (I/O to GND) *3 Ipp=3A, Tp=8/20μs, (I/O to GND) *3 Ipp=1A, Tp=8/20μs, (GND to I/O) *3 Ipp=3A, Tp=8/20μs, (GND to I/O) *3 VR=0V, f=1MHz, (I/O to GND) VR=0V, f=1MHz, (I/O to I/O) Unit V V nA V V V V pF pF Note : *3 Ipp according to IEC61000-4-5 Package Dimensions unit : mm (typ) 7065-001 Electrical Connection 9 8 7 6 2.3 9 1.0 8 7 6 1 1 0.308 2 3 4 5 2 3 4 5 Pin 1 Marking Area 0.31 1 : I/O1 2 : I/O2 3 : GND 4 : I/O3 5 : I/O4 6 : NC 7 : NC 8 : NC 9 : NC Top view 0.94 0.5 1 0.59 2 3 0.2 4 5 9 8 7 0.4 6 1 : I/O1 2 : I/O2 3 : GND 4 : I/O3 5 : I/O4 6 : NC 7 : NC 8 : NC 9 : NC SANYO:TSLP-9-1 0.05 MAX 0.35 No. A1506-2/4 VS912SL Application Example +5V HDMI Source/Sink HDMI Type A Connector 1 2 VS912SL 3 4 TMDS Data1 5 6 7 8 VS912SL 9 10 11 12 13 14 VS912SL SDA 15 16 17 18 Hot Plug Detect VS909SL 19 CEC Line N.C. DDC(I2C Bus) DDC/CEC GND +5V Hot Plug Detect TSDM Channels TMDS Data2 TMDS Data0 TMDS Clock CEC SCL IT14836 14 13 Clamping Voltage tp=8/20μs I/O to GND Clamping Voltage, VFC -- V 6 Forward Clamping Voltage tp=8/20μs GND to I/O Clamping Voltage, VCL -- V 5 12 11 10 9 8 7 4 3 2 1 0 1 2 3 4 IT14735 0 0 1 2 3 4 5 IT14736 Peak Pulse Current, Ipp -- A 10-6 7 5 3 2 10-7 7 5 3 2 10-8 7 5 3 2 -9 10 7 5 3 2 10-10 7 5 3 2 -11 10 25 Reverse Current Peak Pulse Current, Ipp -- A 0.6 Line Capacitance VR=5.3V I/O to GND 0.5 f=1MHz I/O to GND Line Capacitance, CT -- pF Reverse Current, IR -- A 0.4 0.3 0.2 0.1 50 75 100 125 150 IT14737 0 0 1 2 3 4 5 IT14738 Temperature, T -- °C Reverse Voltage, VR -- V No. A1506-3/4 VS912SL 0.6 Line Capacitance I/O to GND 0.7 0.6 Line Capacitance f=1MHz VR=0V 0.5 Line Capacitance, CT -- pF Line Capacitance, CT -- pF 0.4 VR=0V VR=5.3V 0.5 0.4 0.3 0.2 0.1 0 --50 V R=5.3V V R=0V 0.3 0.2 0.1 0 0 500 1000 1500 2000 2500 3000 IT14739 --25 0 25 50 75 100 IT14740 Frequency, f -- MHz Temperature, T -- °C SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of October, 2009. Specifications and information herein are subject to change without notice. PS No. A1506-4/4