109P1324H101

127×127×38 mm San Ace 127 9P type ■ General Specifications · Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1) · Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage) Expected life at 40°C is for reference only. · Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 599. · Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) · Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame) · Sound pressure level (SPL)……………… At 1 m away from the air inlet · Storage temperature……………………… -30 to +70˚C (Non-condensing) · Lead wire…………………………………… Red Black or Blue Sensor Yellow · Mass………………………………………… 350 g ■ Specifications The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed SPL Operating temperature Expected life [V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h] 1.3 0.82 0.55 0.41 0.3 0.2 15.6 9.84 13.2 9.84 14.4 9.6 3300 2950 3300 2950 3300 2950 4.2 3.8 4.2 3.8 4.2 3.8 148 134 148 134 148 134 117.6 98 117.6 98 117.6 98 0.472 0.394 0.472 0.394 0.472 0.394 47 45 47 45 47 45 -20 to +60 40000/60˚C (70000/40˚C) 109P1312S101 109P1312H101 109P1324S101 109P1324H101 109P1348S101 109P1348H101 12 10.2 to 13.8 24 20.4 to 27.6 48 40.8 to 55.2 Max. airflow Max. static pressure Note: Sensor and control options are available for selection. Refer to the table on p. 622. ■ Airflow - Static Pressure Characteristics 109P1312S101 109P1312H101 With pulse sensor Operating voltage range 13.8 V 0.5 0.4 12 V 100 10.2 V 0.3 0.2 0.4 50 0.1 0 0 1 2 3 4 5 (m3/min) 0 20 40 60 80 100 120 140 160 180 (CFM) Airflow 192 CATALOG No. C1111B002 '21.9.IT 0.3 0.2 0.1 0 (inch H2O) (Pa) 120 0.6 100 12 V 80 10.2 V 60 150 27.6 V 0.5 13.8 V Static pressure 0.5 With pulse sensor Operating voltage range (inch H2O) (Pa) 150 Static pressure 0.6 109P1324S101 With pulse sensor Operating voltage range (inch H2O) (Pa) Static pressure DC DC Fan 127 mm sq. DC Fan 40 20 0.4 24 V 100 20.4 V 0.3 0.2 50 0.1 0 1 0 2 50 3 100 Airflow 4 150 5 (m3/min) 200 (CFM) 0 0 1 2 3 4 5 (m3/min) 0 20 40 60 80 100 120 140 160 180 (CFM) Airflow 109P1348S101 With pulse sensor Operating voltage range Operating voltage range (inch H2O) (Pa) 0.3 0.2 0.1 0 (inch H2O) (Pa) 100 27.6 V 80 24 V 55.2 V 0.5 20.4 V 60 0.5 150 40 20 0.4 48 V 100 40.8 V 0.3 0.2 0.4 Static pressure Static pressure 0.4 0.6 50 0.1 0 1 0 2 50 3 100 Airflow 4 5 150 ■ Dimensions (unit: mm) 0 (m3/min) 0 1 2 3 4 5 0.3 0.2 0.1 0 (m3/min) 0 20 40 60 80 100 120 140 160 180 (CFM) 200 (CFM) With pulse sensor Operating voltage range (inch H2O) (Pa) 120 Static pressure 0.5 109P1348H101 With pulse sensor DC Fan 127 mm sq. 109P1324H101 DC ■ Airflow - Static Pressure Characteristics 120 100 55.2 V 48 V 80 40.8 V 60 40 20 0 1 0 Airflow 2 50 3 100 Airflow 4 150 5 (m3/min) 200 (CFM) (With ribs) 4-ø4.3±0.3 Mounting hole (10) 127±0.8 113.3±0.3 +30 300 0 Lead wire AWG24 UL 1007 (6) 113.3±0.3 127±0.8 (6) 38±0.5 Airflow direction Rotating direction ■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Outlet side Inlet side 113.3±0.3 113.3±0.3 4-ø4.3 5 123 113.3±0.3 2 ø1 113.3±0.3 7. 4 2 ø1 4-ø4.3 123 ■ Options Finger guards page: p. 585 Model no.: 109-722, 109-722H, 109-723 CATALOG No. C1111B002 '21.9.IT 193