2SC3752M

Ordering number:ENN1971A NPN Triple Diffused Planar Silicon Transistor 2SC3752 800V/3A Switching Regulator Applications Features Package Dimensions · High breakdown voltage and high reliability. · High-speed switching. · Wide ASO. · Adoption of MBIT process. · Micaless package facilitating mounting. unit:mm 2041A [2SC3752] 4.5 2.8 3.5 7.2 10.0 5.6 18.1 16.0 3.2 2.4 14.0 1.6 1.2 0.7 0.75 1 2 3 2.55 1 : Base 2 : Collector 3 : Emitter SANYO : TO-220ML 2.4 2.55 2.55 2.55 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Conditions Ratings Unit VCBO VCEO 1100 V 800 V VEBO IC 7 V 3 A 10 A Collector Current (Pulse) ICP Base Current IB PC Collector Dissipation Junction Temperature Tj Storage Temperature Tstg PW≤300µs, Duty Cycle≤10% 1.5 A 30 W 150 ˚C –55 to +150 ˚C Tc=25˚C Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=800V, IE=0 10 µA Emitter Cutoff Current IEBO VEB=5V, IC=0 10 µA hFE1 VCE=5V, IC=0.2A hFE2 fT VCE=5V, IC=1A VCE=10V, IC=0.2A DC Current Gain Gain-Bandwidth Product 10* 40* 8 15 MHz Continued on next page. * : The hFE1 of the 2SC3752 is classified as follows. When specifying the hFE1 rank, specify two ranks or more in principle. Rank K L M hFE 10 to 20 15 to 30 20 to 40 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 61704TN (PC)/N3098HA (KT)/4237AT/2046KI, TS No.1971–1/4 2SC3752 Continued from preceding page. Parameter Symbol Output Capacitance Cob VCE(sat) VBE(sat) Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Ratings Conditions min VCB=10V, f=1MHz Turn-ON Time Unit max 60 pF IC=1.5A, IB=0.3A 2.0 V IC=1.5A, IB=0.3A V(BR)CBO IC=1mA, IE=0 V(BR)CEO IC=5mA, RBE=∞ 1.5 V V(BR)EBO IE=1mA, IC=0 VCEX(sus) IC=1.5A, IB1=–IB2=0.3A, L=2mH, Clamped ton VCC=400V, 5IB1=–2.5IB2=IC=2A, RL=200Ω Collector-to-Emitter Sustain Voltage typ Storage Time tstg tf Fall Time 1100 V 800 V 7 V 800 V 0.5 µs VCC=400V, 5IB1=–2.5IB2=IC=2A, RL=200Ω 3.0 µs VCC=400V, 5IB1=–2.5IB2=IC=2A, RL=200Ω 0.3 µs Switching Time Test Circuit IB1 IB2 INPUT PW=20µs D.C.≤1% OUTPUT RB RL 200Ω VR 50Ω VCC=200V + 470µF + 100µF VBE=--5V IC -- VCE 3.2 5 2.4 2.0 1.6 1.2 A 80mA 60m 100mA 250mA 200mA 150mA A 50mA 40m DC Current Gain, hFE Collector Current, IC – A VCE=5V 7 2.8 30mA 0.8 Ta=120°C 3 25°C 2 --40°C 10 7 20mA IB=0 10mA 0.4 5 3 0.01 0 0 1 2 3 4 5 6 7 8 9 10 Collector-to-Emitter Voltage, VCE – V ITR05880 VCE(sat) -- IC 10 Base-to-Emitter Saturation Voltage, VBE (sat) – V 25°C Ta=--4 0°C 2 7 5 3 C 0° 12 7 5 3 2 0.01 5 7 0.1 2 3 5 7 1.0 2 Collector Current, IC – A 3 5 ITR05881 VBE(sat) -- IC IC / IB=5 5 3 2 1.0 2 0.1 3 7 3 1.0 2 10 IC / IB=5 7 5 Collector-to-Emitter Saturation Voltage, VCE (sat) – V hFE -- IC 100 Ta=--40°C 7 25°C 5 120°C 3 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC – A 2 3 5 ITR05882 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC – A 2 3 5 ITR05883 No.1971–2/4 2SC3752 IC -- VBE 25°C --40°C 1 VCC=400V R load 5IB1=--2.5IB2=IC tstg 5 3 2 1.0 7 5 to n 2 7 Switching Time, SW time – µs 3 SW Time -- IC 10 VCE=5V Ta=1 20°C Collector Current, IC – A 4 3 tf 2 0.1 7 5 0.1 0 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE – V 5 7 2 1.0 3 5 ITR05885 Reverse Bias A S O 2 ms on Collector Current, IC – A rati 10 ope s 1m DC s 0µ 10 IC=3A 1.0 7 5 3 2 0.1 7 5 3 2 5 7 10 7 5 3 2 1.0 7 5 3 2 IB2=--0.3A Tc=25°C 0.1 7 5 Tc=25°C Single pulse 3 2 10 3 5 7 100 2 3 Collector-to-Emitter Voltage, VCE – V 5 7 1000 ITR05886 5 7 100 2 3 5 7 1000 2 Collector-to-Emitter Voltage, VCE – V ITR05887 PC -- Ta 40 Collector Dissipation, PC – W 3 ICP=10A 10 7 5 3 2 0.01 7 5 3 2 Collector Current, IC – A Forward Bias A S O 2 Collector Current, IC – A 1.2 ITR05884 30 20 10 0 0 20 40 60 80 100 120 Ambient Temperature, Ta – ˚C 140 160 ITR05888 No.1971–3/4 2SC3752 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice. PS No.1971–4/4