2SJ652-RA11

2SJ652 Ordering number : EN7625A SANYO Semiconductors DATA SHEET P-Channel Silicon MOSFET 2SJ652 General-Purpose Switching Device Applications Features • • • ON-resistance RDS(on)1=28.5mΩ(typ.) Input capacitance Ciss=4360pF (typ.) 4V drive Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) ID IDP Drain Current (Pulse) PW≤10μs, duty cycle≤1% Unit --60 V ±20 V --28 A --112 A 2.0 W Allowable Power Dissipation PD 30 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Energy (Single Pulse) *1 EAS IAV 343 mJ --28 A Avalanche Current *2 Tc=25°C Note : *1 VDD=--30V, L=500μH, IAV=--28A (Fig.1) *2 L≤500μH, single pulse Package Dimensions Product & Package Information unit : mm (typ) 7529-001 • Package • JEITA, JEDEC • Minimum Packing Quantity 4.7 10.16 3.18 2SJ652-1E Marking Electrical Connection 2 15.87 6.68 3.3 2.54 A J652 3.23 LOT No. 1 2.76 12.98 1.47 MAX DETAIL-A 0.8 1 2 3 FRAME EMC 2.54 2.54 3 (0.84) 0.5 ( 1.0) 15.8 : TO-220F-3SG : SC-67 : 50 pcs./magazine 1 : Gate 2 : Drain 3 : Source SANYO : TO-220F-3SG http://semicon.sanyo.com/en/network 51612QA TKIM TC-00002759/72503 TSIM TA-4245 No.7625-1/7 2SJ652 Electrical Characteristics at Ta=25°C Parameter Drain-to-Source Breakdown Voltage Symbol min typ --60 IGSS VGS(off) | yfs | ID=--1mA, VGS=0V VDS=--60V, VGS=0V VGS=±16V, VDS=0V VDS=--10V, ID=--1mA VDS=--10V, ID=--14A --1.2 Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 ID=--14A, VGS=--10V ID=--14A, VGS=--4V Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance V(BR)DSS IDSS Ratings Conditions max Unit V --1 μA ±10 μA --2.6 18 26 V S 28.5 38 mΩ 39 55.5 mΩ 4360 pF 470 pF Crss 335 pF Turn-ON Delay Time td(on) 33 ns Rise Time tr td(off) 210 ns Turn-OFF Delay Time Fall Time Total Gate Charge tf Qg Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD VDS=--20V, f=1MHz See Fig.2 ns 180 ns VDS=--30V, VGS=--10V, ID=--28A 80 nC 15 nC 12 IS=--28A, VGS=0V Fig.1 Avalanche Resistance Test Circuit 0V --10V ≥50Ω RG --1.2 V VDD= --30V VIN ID= --14A RL=2.1Ω VIN 2SJ652 VDD 50Ω nC --0.96 Fig.2 Switching Time Test Circuit L 0V --10V 310 D PW=10μs D.C.≤1% VOUT G 2SJ652 P.G 50Ω S Ordering Information Device 2SJ652-1E Package Shipping memo TO-220F-3SG 50pcs./magazine Pb Free No.7625-2/7 2SJ652 VDS= --10V --4V --20 25 --10 °C 75 °C --10 0 75°C 25 VGS= --3V --30 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 --4.5 Drain-to-Source Voltage, VDS -- V 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 --4.5 Gate-to-Source Voltage, VGS -- V IT06535 RDS(on) -- VGS 100 0 --5.0 Tc= --25 °C --20 Drain Current, ID -- A --30 Tc= --25° C --40 --40 Drain Current, ID -- A ID -- VGS --50 --6V --10 V Tc=25°C °C ID -- VDS --50 RDS(on) -- Tc 70 --5.0 IT06536 Tc=75°C 40 25°C --25°C 20 --5 --6 --7 --8 --9 Gate-to-Source Voltage, VGS -- V Forward Transfer Admittance, | yfs | -- S 100 7 Tc= 5°C --2 75° ° 5C 2 C 2 10 7 5 3 2 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Drain Current, ID -- A 5 25 5 7 50 75 100 125 VGS=0V --1.0 7 5 3 2 --0.1 7 5 3 2 0 --0.3 --0.6 --0.9 --1.2 --1.5 Diode Forward Voltage, VSD -- V IT06540 Ciss, Coss, Crss -- VDS 7 f=1MHz Ciss 5 td(off) 150 IT06538 IF -- VSD IT06539 3 Ciss, Coss, Crss -- pF 3 2 tf 100 7 tr 5 td(on) 3 2 10 --0.1 0 --10 7 5 3 2 --0.01 7 5 3 2 --0.001 SW Time -- ID 7 --25 7 5 3 2 5 1.0 --0.1 10 Case Temperature, Tc -- °C VDS= --10V 3 20 IT06537 | yfs | -- ID 0V = --1 VGS 4A, --1 I D= 30 0 --50 --10 = -GS A, V 14 -I D= 40 C 25°C --4 4V 50 Tc=7 5° --3 60 --25°C 60 0 --2 Switching Time, SW Time -- ns Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 80 Forward Current, IF -- A Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ ID= --14A 2 1000 7 Coss Crss 5 3 2 VDD= --30V VGS= --10V 2 3 5 7 --1.0 2 3 5 7 --10 Drain Current, ID -- A 2 3 5 IT06541 100 0 --5 --10 --15 --20 --25 Drain-to-Source Voltage, VDS -- V --30 IT06542 No.7625-3/7 2SJ652 VGS -- Qg --10 --8 --7 --6 --5 --4 --3 --1 3 2 10 20 30 40 50 60 Total Gate Charge, Qg -- nC 70 80 0.5 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT06545 s 3 5 7 --1.0 2 3 5 7 --10 2 3 Drain-to-Source Voltage, VDS -- V Allowable Power Dissipation, PD -- W 1.0 20 2 PD -- Tc 40 1.5 0 1m s 10 ms 0m DC s op era tio n Tc=25°C Single pulse IT06559 2.0 0μ Operation in this area is limited by RDS(on). --0.1 --0.1 PD -- Ta 2.5 Allowable Power Dissipation, PD -- W 3 2 μs 10 10 --10 7 5 --2 0 10 ID= --28A 3 2 --1.0 7 5 0 IDP= --112A (PW≤10μs) --100 7 5 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V --9 0 ASO 3 2 5 7 --100 IT16830 35 30 25 20 15 10 5 0 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT06544 No.7625-4/7 2SJ652 Magazine Specification 2SJ652-1E No.7625-5/7 2SJ652 Outline Drawing 2SJ652-1E Mass (g) Unit 1.8 mm * For reference No.7625-6/7 2SJ652 Note on usage : Since the 2SJ652 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of May, 2012. Specifications and information herein are subject to change without notice. PS No.7625-7/7