0031.1091

FEF (Snap) Fuseholder https://www.schurter.com /PG02 Shock-Safe Fuseholder, 5 x 20 mm, Slotted Cap/Fingergrip, Snap-in, 0.75 - 3.0 mm Slotted cap fingergrip See below: 250  VAC  ·  3.2 W / 10 A  (VDE)10 A  (UL/CSA) Approvals and Compliances Description Weblinks - Panel Thickness 0.75 - 3.0 mm, Snap-in pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Microsite Technical Data   Shock-Safe Category Fuse-Link Mounting Attachment Terminal Rated Voltage Rated current Rated Power Acceptance IEC Degree of Protection Admissible Ambient Temp. Climatic Category Material: Socket Material: Cap Material: Terminals Unit Weight Storage Conditions Product Marking PC2 5 x 20 mm Panel mount, Front Side Snap-in Solder 250 VAC  10 A (VDE), 10 A (UL/CSA) 3.2 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves IP40 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoplastic, black, UL 94V-0 Thermoplastic, black, UL 94V-0 Copper alloy, tin-plated 6.45 g 0 °C to 60 °C, max. 70% r.h. , Type, Certification marks Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Panel Thickness Iron Soldering Profile 350 °C / 3 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 ≤  10 mΩ at 100 mA acc. to IEC 60127-6 > 3 kV between live parts (50 Hz: 1 min) > 4 kV between live parts ≥ 10 MΩ between live parts (500 VDC: 1 min) III acc. to IEC 60664-1 2 acc. to IEC 60664-1 0.75 - 3.0 mm Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FEF Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40046093 UL Approvals UL UR File Number: E39328 Circuit Protection 1 FEF (Snap) Fuseholder https://www.schurter.com /PG02 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Industrial Control Equipment Designed according to CSA C22.2 no. 4248.1 Industrial Control Equipment Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm]  33 mm S ø 15 1.8 ø 15 S 4 4 0.5 6 0.5 33 33 38 Variant 0031.1091 und 0031.1095 2 Variant Fingergrip 0031.1901 and 0031.1902 Circuit Protection FEF (Snap) Fuseholder https://www.schurter.com /PG02 S ø 15 1.8 38 4 6 0. 5x 2. 8 4 0. 5x 2. 8 ø 15 S 38 42.5 Variant 0031.1161 und 0031.1165 Variant Fingergrip 0031.1913 and 0031.1914 0 0 13.6 0 12.7 -0.1 13 -0.3 0 13 -0.3 12 -0.1 2.4 Mounting Holes. For 0031.1161 / 0031.1165 / 0031.1913 / 0031.1914 Mounting Holes. For 0031.1091 / 0031.1095 / 0031.1901 / 0031.1902 Derating Curves Admissible Power Acceptance in Watt 3.2 2.5 I = 1.0 In 2.0 I = 0.7 In 1.5 I =