0031.8231

Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, 5 x 20 / 6.3 x 32 mm, THT, IEC: 500 VAC, UL/CSA: 600 VAC/DC, Cover, IEC 60335-1 OGD 500 VAC · 4 W / 10 A (VDE) · 600 VAC/DC · 16 A (UL/CSA) - Fuseholder for 500 VAC applications - Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order number: 0031.8231.15 - Fuse block accepts 5x20 or 6.3x32 fuse-links Description Applications References Weblinks - Equipment with three-phase supply (400 VAC) - Industrial electronic General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Standards - IEC 60127-6 - UL 4248-1 / UL 512 - CSA C22.2 no. 39 Approvals - VDE License Number: 40008993 (250V) + 40018378 (500V) - UL File Number: E39328 Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC 5 x 20 or 6.3 x 32 mm PCB Screw or Rivet Solder THT 500 VAC (VDE), 600 VAC/DC (UL/CSA) 10 A (VDE), 16 A (UL/CSA) 4 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 00 / IP 20 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 3.7 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Approvals Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 2 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc Fuses  OGD www.schurter.com/pg02b Abmessungen   35.4 mm Fuseholder Blocks & Clips ø 4.8 15.8 12.7 0.7 5±0.1 1.3 -0 +0.1 1.1 ø 2.7 20 ±0.5 5 10.9 20 ±0.1 Drilling diagram Derating Curves for Fuseholders Admissible Power Acceptance in Watt 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Ambient Air Temperature Ta °C Variants Holder l l Material Thermoplastic Spec. Thermoplastic 1 Remark Approvals pending Order Number 0031.8231 0031.8231.15 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Packaging Unit Accessories Bulk 178 x 91 x 71 mm (100 pcs.) Description Cover OGD, OGD-SMD  Cover for Holder OGD, OGD-SMD    Reflow-Cover 0853.0917 2 The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.