00318002

Fuseholder Blocks & Clips OG (Holder) 6.3x32 www.schurter.com/pg02b Fuseholder Open Design, 6.3 x 32 mm, THT 250 VAC · 2.5 W / 10 A16 A (UL) Description Approvals - Through hole mounting - UL File Number: E39328 References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC 6.3 x 32 mm PCB Screw or Rivet Solder THT 250 VAC 16 A (UL) 2.5 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 00 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 7.23 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking Voltage, Current, Approvals Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Abmessungen   41 mm 41 ø 6.3 max. 15 1.3 3.8 +0.1 0 18.5 37.5 +0.6 0 ø 3.2 +0.6 37.5 0 0.5 1.1 Drilling diagram 4 Fuses  OG (Holder) 6.3x32 www.schurter.com/pg02b Derating Curves for Fuseholders Admissible Power Acceptance in Watt 2.5 2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Fuseholder Blocks & Clips Ambient Air Temperature Ta °C Variants Holder l     Order Number 0031.8002 0853.9561 0853.9562 Packaging Unit Bulk (100 pcs.) 2 The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.