0034.6709

MST 250 Fuses https://www.schurter.com /PG01_2 Subminiature Fuse, 8.5 mm, Time-Lag T, 250 VAC, 63 VDC Subminiature fuse 8.5 mm, time-lag T, 250 VAC Short terminal Subminiature fuse 8.5 mm, time-lag T, 250 VAC Terminal long PCB IEC 60127-3 · 250 VAC · Time-Lag T Description - Directly solderable on printed circuit boards - Low Breaking Capacity See below: Approvals and Compliances Applications - Primary Protection on PCB - Power Supply Adapter for e.g. laptops - SMPS (Switching Mode Power Supply) for TV's and DVD's References Corresponding Fuseholder   Fuse Kit  Fuse Kit MST250 / MSF 250  Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product Technical Data Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking   250 VAC, 63 VDC  0.05 - 6.3 A 35 A - 63 A Time-Lag T PCB,THT -55 °C to 125 °C 55/125/21 acc. to IEC 60068-1 Thermoplastic, UL 94V-0 Tin-Plated Copper 0.53 g 0 °C to 40 °C, max. 70% r.h. , Type, Rated current, Rated Voltage, Characteristic, Certification marks Soldering Methods Solderability Resistance to Soldering Heat Case Resistance Flammability Current Carrying Capacity Moisture Resistance Test Vibration, High Frequency Mechanical Shock Resistance to Solvents Terminal Strength Wave Soldering Profile 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb acc. to EIA/IS-722, Test 4.7 >100 MΩ (between leeds and body) UL 94V-0 (acc. to EIA/IS-722, Test 4.12) acc. to EIA/IS-722, Test 4.3.3 MIL-STD-202, Method 106 (50 cycles in a temp./mister chamber) MIL-STD-202, Method 204 Condition D MIL-STD-202, Method 213 Condition A MIL-STD-202, Method 215 Tensile load min. 9 N (acc. to EIA/IS-722, Test 4.5.1) Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Circuit Protection 1 MST 250 Fuses https://www.schurter.com /PG01_2 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: MST 250 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40046346 VDE Approvals VDE VDE Certificate Number: 40002080 UL Approvals UL UR File Number: E41599 CCC Approvals CCC CCC Certificate Number: 2020970207000096 KTL Approvals KTL Korea Testing Laboratory METI Approvals METI Japan Electrical Safety and Environment technology Laboratories Design Standard Description Designed according to IEC 60127-3/4 Miniature fuses - Part 3: Miniature fuse-links Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm]  8.5 mm   ø 8.5 ø 0.64 5.08 0.5 8.5 +0.1 0 1 18.8 3.2 4.3 0.5 8.5 ø 8.5 5.08 3.2 ø 0.64 5.08 Drilling diagram 2 Circuit Protection MST 250 Fuses https://www.schurter.com /PG01_2 Derating Curves   140 120 100 80 60 40 20 -60 -40 -20 0 20 40 60 80 100 120 Pre-Arcing Time Rated Current In 0.05 A - 6.3 A 1.5 x In min. 2.1 x In max. 60 min 120 s 2.75 x In min. 2.75 x In max. 400 ms 10 s 4.0 x In min. 4.0 x In max. 150 ms 3s 10.0 x In min. 10.0 x In max. 20 ms 150 ms Time-Current-Curves 100000 10000 1000 Time in Seconds 100 10 1 0.1 0.01 0.001 10 1 Multiple of Rated Current In All Variants Rated Current [A] Rated Voltage [VAC] 0.05 250 0.05 250 0.05 Breaking Capacity Voltage Drop 1.0 In max. [mV] Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.5 In max. [mW] Melting I²t 10.0 In typ. [A²s] 1) 550 415 155 0.03 l l l l 1) 550 415 155 0.03 l l l l 250 1) 550 415 155 0.03 l l l l 0.063 250 1) 480 420 160 0.05 l l l l 0.063 250 1) 480 420 160 0.05 l l l l 0.063 250 1) 480 420 160 0.05 l l l l S Circuit Protection L T Order Number l 0034.6702 █ 0034.6602 l l 0034.6802 █ 0034.6603 l l 0034.6703 l 0034.6803 3 MST 250 Rated Current [A] Rated Voltage [VAC] 0.08 250 0.08 250 Fuses https://www.schurter.com /PG01_2 Breaking Capacity Voltage Drop 1.0 In max. [mV] Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.5 In max. [mW] Melting I²t 10.0 In typ. [A²s] S 1) 400 360 165 0.06 l l l l 1) 400 360 165 0.06 l l l l 0.08 250 1) 400 360 165 0.06 l l l l 0.1 250 1) 350 320 170 0.08 l l l l 0.1 250 1) 350 320 170 0.08 l l l l 0.1 250 1) 350 320 170 0.08 l l l l 0.125 250 1) 300 270 180 0.12 l l l l 0.125 250 1) 300 270 180 0.12 l l l l 0.125 250 1) 300 270 180 0.12 l l l l 0.16 250 1) 280 190 190 0.24 l l l l 0.16 250 1) 280 190 190 0.24 l l l l 0.16 250 1) 280 190 190 0.24 l l l l 0.2 250 1) 260 150 200 0.35 l l l l 0.2 250 1) 260 150 200 0.35 l l l l 0.2 250 1) 260 150 200 0.35 l l l l 0.25 250 1) 240 120 220 0.6 l l l l 0.25 250 1) 240 120 220 0.6 l l l l 0.25 250 1) 240 120 220 0.6 l l l l 0.315 250 1) 220 120 250 0.8 l l l l 0.315 250 1) 220 120 250 0.8 l l l l 0.315 250 1) 220 120 250 0.8 l l l l 0.4 250 1) 200 110 280 1.1 l l l l 0.4 250 1) 200 110 280 1.1 l l l l 0.4 250 1) 200 110 280 1.1 l l l l 0.5 250 1) 190 100 310 2.5 l l l l 0.5 250 1) 190 100 310 2.5 l l l l 0.5 250 1) 190 100 310 2.5 l l l l 0.63 250 1) 180 90 360 4 l l l l 0.63 250 1) 180 90 360 4 l l l l 0.63 250 1) 180 90 360 4 l l l l 0.8 250 1) 160 80 430 8 l l l l 0.8 250 1) 160 80 430 8 l l l l 0.8 250 1) 160 80 430 8 l l l l 1 250 1) 140 70 500 12 l l l l l 1 250 1) 140 70 500 12 l l l l l 1 250 1) 140 70 500 12 l l l l l 1.25 250 1) 130 70 600 15 l l l l l 1.25 250 1) 130 70 600 15 l l l l l 1.25 250 1) 130 70 600 15 l l l l l 1.6 250 1) 120 60 730 30 l l l l l 1.6 250 1) 120 60 730 30 l l l l l 1.6 250 1) 120 60 730 30 l l l l l 2 250 1) 100 60 870 34 l l l l l 2 250 1) 100 60 870 34 l l l l l 2 250 1) 100 60 870 34 l l l l l 2.5 250 1) 100 50 1000 55 l l l l l 2.5 250 1) 100 50 1000 55 l l l l l 2.5 250 1) 100 50 1000 55 l l l l l 3.15 250 1) 100 50 1200 76 l l l l l 3.15 250 1) 100 50 1200 76 l l l l l 3.15 250 1) 100 50 1200 76 l l l l l 4 250 2) 100 50 1400 80 l l l l l 4 250 2) 100 50 1400 80 l l l l l 4 Circuit Protection L T Order Number l 0034.6704 0034.6604 l █ l 0034.6804 0034.6605 l l █ 0034.6705 l 0034.6805 0034.6606 l l █ 0034.6706 l 0034.6806 0034.6607 l l █ 0034.6707 l 0034.6807 0034.6608 l l █ 0034.6708 l 0034.6808 0034.6609 l l █ 0034.6709 l 0034.6809 0034.6610 l l █ 0034.6710 l 0034.6810 0034.6611 l l █ 0034.6711 l 0034.6811 l l l l l l 0034.6612 █ 0034.6712 █ l 0034.6812 █ 0034.6613 █ 0034.6713 l 0034.6813 █ 0034.6614 █ 0034.6714 l 0034.6814 0034.6615 l l l l █ 0034.6715 l 0034.6815 █ 0034.6616 █ 0034.6716 l 0034.6816 0034.6617 l l █ 0034.6717 l 0034.6817 0034.6618 l l l l █ 0034.6718 l 0034.6818 █ 0034.6619 █ 0034.6719 l 0034.6819 0034.6620 l l █ 0034.6720 l 0034.6820 0034.6621 l l 0034.6721 █ MST 250 Fuses https://www.schurter.com /PG01_2 Rated Current [A] Rated Voltage [VAC] Breaking Capacity Voltage Drop 1.0 In max. [mV] Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.5 In max. [mW] Melting I²t 10.0 In typ. [A²s] S 4 250 2) 100 50 1400 80 l l 5 250 3) - 50 - 230 l l l l 5 250 3) - 50 - 230 l l l l l l 5 250 3) - 50 - 230 l l 6.3 250 3) - 45 - 360 l l l L l 0034.6821 l 6.3 250 3) - 45 - 360 l l l 6.3 250 3) - 45 - 360 l l l █ 0034.6622 l l 0034.6722 l 0034.6822 l l T Order Number █ 0034.6623 l l 0034.6723 l 0034.6823 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) IEC: 35 A @ 250 VAC 1) UL: 35 A @ 250 VAC / 50 A @ 63 VDC 2) IEC: 10 In @ 250 VAC 2) UL: 10 In @ 250 VAC / 50 A @ 63 VDC 3) IEC: 10 In @ 250 VAC 3) UL: 10 In @ 250 VAC / 10 In @ 63 VDC Packaging Unit   S = 4.3 mm L = 18.8 mm T = 18.8 mm 100 pcs in ESD-plastic bag 100 St. (Bulk) 750 pcs. in tape [P = P0: 12.7; P1: 3.81; H1: 26.45] on reel [A: 360; W3: 40; W4: 52; C: 30.5] 21.03.2022 acc. IEC 60286-2 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Circuit Protection 5