1070.0422

Analog 4-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 1.2 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. Construction : Item 1 2 3 4 5 6 7 8 9 10 Material Remarks 0.188mm ITO PET Film Antiglare coating Surface hardness: 3H Resistance:300~600Ω/□ ITO Patterned Glass (Bottom layer) 1.57mm ITO Glass Resistance:300~600Ω/□ Tail Base Kapton Separated Tail Tail Coverlay Kapton Connector AMP compatible 2,54mm Top layer circuit Silver ink Bottom layer circuit Silver ink Layer to layer contacted Silver ink Dot spacer UV Cure ink Isolation Layer Isolation Adhesive Description ITO PET (Top layer) Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2005 Bearb. Gepr. Vert. Datum 04.11. 04.11. Name Maurer Maurer TOUCHSCREEN 8,48“, 4-Wire AMT-09530-01 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name D 79346 Endingen 1070.0422 Index: - page 1 of 5 1.3 Input Method and Activation Force Input Method 1.6mm dia. Delrin stylus 16mm dia. Silicon "finger" Average Activation Force 0,1 ~ 0,7N 0,1 ~ 0,8 N 2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: Haze: > 80% < 13% 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Operating Voltage: Contact current: Circuit close resistance: Circuit open resistance: Contact bounce: Linear Test : Capacitance: 5.5V or less 20mA (maximum) X : 400 -1000Ω; Y : 200 -650Ω > 10MΩ at 25VDC < 10ms < 1.5 % 100nF(maximum) 4. Linearity 4.1 Linear Test Specification Direction X: