1070.0423

Analog 4-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. 1.2 Construction : Item 1 Material Remarks 0.188mm ITO PET Film Antiglare coating Surface hardness: 3H Resistance:300~600Ω/□ ITO Patterned Glass (Bottom 1.57mm ITO Glass Resistance:300~600Ω/□ layer) Tail PET Film Integral to Top layer circuit Tail insulation PET Film Connector AMP Compatible Pitch : 2.54mm Top layer circuit Silver ink Bottom layer circuit Silver ink Layer to layer contacted Silver ink Dot spacer UV Cure ink Isolation Layer Isolation Adhesive Description ITO PET (Top layer) 2 3 4 5 6 7 8 9 10 Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2002 Bearb. Gepr. Vert. Datum 24.10. 24.10. Name Maurer Maurer TOUCHSCREEN 6,4“, 4 Wire SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured bei Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name 1070,0423 Index: - D 79346 Endingen Blatt 1 von 5 1.3 Input Method and Activation Force Input Method 1.6mm dia. Delrin stylus 16mm dia. Silicon "finger" Average Activation Force 10~70 grams 10~ 80 grams 2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: >80% Haze: 3~7% (JIS K-7105) 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Operating Voltage: 5.5V or less Contact current: 20mA (maximum) Circuit close resistance: X : 400~1000Ω Y : 200~650Ω Circuit open resistance: > 10MΩ at 25VDC Contact bounce: < 10ms Linear Test :