1070.0441

Analog 5-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. 1.2 Construction : Item 1 2 3 4 5 6 7 8 9 10 Material Remarks 0.188mm ITO PET Film Antiglare coating Surface hardness: 3H Resistance:300~600Ω/□ ITO Patterned Glass (Bottom 2.36mm ITO Glass Resistance:300~600Ω/□ layer) Tail Base Kapton Separated Tail Tail Coverlay Kapton Connector AMP Compatible Pitch:2.54mm Top layer circuit Silver ink Bottom layer circuit Silver ink Layer to layer contacted Silver ink Dot spacer UV Cure ink Isolation Layer Isolation Adhesive Description ITO PET (Top layer) Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2002 Bearb. Gepr. Vert. Datum 24.10. 24.10. Name Maurer Maurer TOUCHSCREEN 12,26“, 5-Wire AMT-02501-01 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually a 500004569 18.08.2006 Zu Änd. Datum H Maurer 1070.0441 Index: a Name D 79346 Endingen Blatt 1 von 3 1.3 Input Method and Activation Force Input Method 1.6mm dia. Delrin stylus 16mm dia. Silicon "finger" Average Activation Force 10~70 grams 10~ 80 grams 2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: >80% Haze: 3~7% (JIS K-7105) 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 Operating Voltage: 5.5V or less Contact current: 20mA (maximum) Circuit close resistance: 30~300Ω Circuit open resistance: > 10MΩ at 25VDC Contact bounce: < 15ms Linear Test :