1070.0445

Analog 4-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. 1.2 Construction : Item Material Remarks 0.188mm ITO PET Film Antiglare coating 1 Surface hardness: 3H Resistance:300~600Ω/□ ITO Patterned Glass (Bottom 1.1mm ITO Glass Resistance:300~600Ω/□ 2 layer) 3 Tail Base Kapton Separated Tail 4 Tail Coverlay Kapton 5 Conductor Copper 6 Top layer circuit Silver ink 7 Bottom layer circuit Silver ink 8 Layer to layer contacted Silver ink 9 Dot spacer UV Cure ink 10 Isolation Layer Isolation Adhesive 11 Stiffener PET Film Description ITO PET (Top layer) Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2003 Bearb. Gepr. Vert. Datum 27.05. 27.05. Name Maurer Maurer TOUCHSCREEN 6,4“, 4-wire SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name 1070,0445 Index: - D 79346 Endingen Blatt 1 von 5 1.3 Input Method and Activation Force Input Method 1.6mm dia. Delrin stylus 16mm dia. Silicon "finger" Average Activation Force 10~70 grams 10~ 80 grams 2. Typical Optical Characteristics 2.1 Visible Light Transmission: >80% 2.2 Haze: 3~7% (JIS K-7105) 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Operating Voltage: 5.5V or less Contact current: 20mA (maximum) Circuit close resistance: X : 350~1000Ω Y : 200~650Ω Circuit open resistance: > 10MΩ at 25VDC Contact bounce: < 10ms Linear Test :