1070.0448

Analog 4-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 1.2 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. Construction : Item 1 2 3 4 5 6 7 8 9 10 11 Description ITO PET (Top layer) ITO Patterned Glass (Bottom layer) Tail Base Tail Coverlay Conductor Top layer circuit Bottom layer circuit Layer to layer contacted Dot spacer Isolation Layer Stiffener Material ITO PET Film 1.10mm ITO Glass PET-Film PET-Film Carbon Silver ink Silver ink Silver ink UV Cure ink Isolation Adhesive PET Film Remarks Antiglare coating Surface hardness: 3H Resistance:300~600Ω/□ Resistance:300~600Ω/□ Separated Tail Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2003 Bearb. Gepr. Vert. Datum 24.10. 24.10. Name Maurer Maurer TOUCHSCREEN 7“, 4 Wire SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name 1070,0448 Index: a D 79346 Endingen Blatt 1 von 6 1.3 Input Method and Activation Force Input Method 1.6mm dia. Delrin stylus 16mm dia. Silicon "finger" Average Activation Force 0.10~0.70N 0.10~0.80N 2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: Haze: > 80% < 10% (JIS K-7105) 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Operating Voltage: Contact current: Circuit close resistance: Circuit open resistance: Contact bounce: Linear Test : Capacitance: 5.5V or less 20mA (maximum) X : 300-900Ω Y : 300-900Ω > 10MΩ at 25VDC < 15ms