10700450

Analog 4-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 1.2 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. Construction : Item 1 2 3 4 5 6 7 8 9 10 Description ITO PET (Top layer) Material ITO PET Film Remarks ANR Clear Surface hardness: 3H Resistance:300~600Ω/□ Clear Resistance:300~600Ω/□ Separated Tail Pitch:2.54mm ITO Patterned Glass (Bottom layer) 1.8 mm ITO Glass Tail Base Tail cover lay Connector Top layer circuit Bottom layer circuit Layer to layer contacted Dot spacer Isolation Layer PET PET AMP Compatible Silver ink Silver ink Silver ink UV Cure ink Isolation Adhesive Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2006 Bearb. Gepr. Vert. Datum 18.08. 18.08. Name Maurer Maurer TOUCHSCREEN 15,0“, 4-Wire AMT-09102-03 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H to chan. date name D 79346 Endingen 1070.0450 Index: - page 1 of 5 1.3 Input Method and Activation Force Input Method 1.6mm Ø Delrin stylus 16mm Ø Silicon "finger" Average Activation Force 0,1 ~ 0,7N 0,1 ~ 0,8 N 2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: Haze: > 80% < 10% 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Operating Voltage: Contact current: Circuit close resistance: Circuit open resistance: Contact bounce: Linear Test : Capacitance: 5.5V or less 20mA (maximum) X : 400 - 1000Ω; Y : 200 - 650Ω > 10MΩ at 25VDC < 10ms < 1.5 % 100nF(maximum) 4. Linearity 4.1 Linear Test Specification Direction X: