10700459

Analog 5-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. 1.2 Construction : Item 1 2 3 4 5 6 7 8 9 10 11 Material Remarks 0.188mm ITO PET Film Antiglare coating Surface hardness: 3H Resistance:300~600Ω/□ ITO Patterned Glass (Bottom 2.36 mm ITO Glass Resistance:300~900Ω/□ layer) Tail Base Kapton Separated Tail Tail cover lay Kapton Connector AMP compatible 2,54mm Top layer circuit Silver ink Bottom layer circuit Silver ink Layer to layer contacted Silver ink Dot spacer UV Cure ink Isolation Layer Isolation Adhesive Glue UV Glue Description ITO PET (Top layer) Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2006 Bearb. Gepr. Vert. Datum 18.08. 18.08 Name Maurer Maurer TOUCHSCREEN 10,67", 5-Wire AMT-02507-01 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name D 79346 Endingen 1070.0459 Index: - page 1 of 4 1.3 Input Method and Activation Force Input Method 16mm dia. Silicon "finger" Average Activation Force Less than 1.00 N 2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: Haze: >80% < 13% 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 Operating Voltage: Contact current: Circuit close resistance: Circuit open resistance: Contact bounce: Linearity Specifications: 5.5V or less 20mA (maximum) 20~300Ω > 10MΩ at 25VDC < 15ms The linearity specifications are based on Hampshire or PenMount touch screen controllers and drivers to define. 10 mm inside of X and Y active area dimensions. The area 10 mm inside of X and Y active area dimensions. 3.6.1 Inner Active Area : Perimeter of Active Area : Changes that contribute to technical improvement are subject to alternations 2006 Bearb. Gepr. Vert. Datum 18.08. 18.08 Name Maurer Maurer TOUCHSCREEN 10,67", 5-Wire AMT-02507-01 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name D 79346 Endingen 1070.0459 Index: - page 2 of 4 3.6.2 Calculate Linearity % Linearity = ∆X 2 + ∆Y 2 * 100 Active Area Diagonal £G Y £G X 3.6.3 Linearity: Inner Active Area :