10700475

Analog 5-wire PET-On-Glass Touch Screen Specification 1. Mechanical Dimensions and Construction 1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. 1.2 Construction: Item 1 2 3 4 5 6 7 8 9 10 11 12 Description ITO PET (Top layer) New designed printing ITO Patterned Glass (Bottom layer) New designed printing Tail Base Tail cover lay Connector Top layer circuit Bottom layer circuit Layer to layer contacted Dot spacer Isolation Layer Glue Preserve pet Material Remarks 0.188mm ITO PET Antiglare coating Film Surface hardness: 3H Resistance:300~600Ω/□ 2.8 mm ITO Glass Resistance:300~900Ω/□ Kapton Separated Tail Kapton AMP compatible 2,54mm Silver ink Silver ink Silver ink UV Cure ink Isolation Adhesive UV Glue PET Film Touch screen side view: Changes that contribute to technical improvement are subject to alternations 2006 Bearb. Gepr. Vert. Datum 18.08. 18.08 Name Maurer Maurer TOUCH SCREEN 15,0", 5-Wire AMT-02513-A1 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name D 79346 Endingen 1070.0475 Index: - page 1 of 4 1.3 Input Method and Activation Force Input Method 16mm dia. Silicon "finger" Average Activation Force Less than 1.00 N 2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: Haze: > 80% < 13% 3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 Operating Voltage: Contact current: Circuit close resistance: Circuit open resistance: Contact bounce: Linearity Specifications: 5.5V or less 20mA (maximum) 20~300Ω > 10MΩ at 25VDC < 15ms The linearity specifications are based on Hampshire or PenMount touch screen controllers and drivers to define. 10 mm inside of X and Y active area dimensions. The area 10 mm inside of X and Y active area dimensions. 3.6.1 Inner Active Area : Perimeter of Active Area : Changes that contribute to technical improvement are subject to alternations 2006 Bearb. Gepr. Vert. Datum 18.08. 18.08 Name Maurer Maurer TOUCH SCREEN 15,0", 5-Wire AMT-02513-A1 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN Manufactured by Apex Material Technology Corp. EDV-Datasheet don’t change manually H Zu Änd. Datum Name D 79346 Endingen 1070.0475 Index: - page 2 of 4 3.6.2 Calculate Linearity % Linearity = ∆X 2 + ∆Y 2 * 100 Active Area Diagonal £G Y £G X 3.6.3 Linearity: Inner Active Area : Perimeter of Active Area :