1241.1732.9.4.0

Verteiler nach H 150.9304 Pos.C05 Description The HDT (horizontal push button switch in momentary action) is designed for PCB mounting, especially for the plug in technique. The switch can be used for the conventional through -hole mounting. The leads are tin-coated for all versions. The illuminated version comes in the LED colours red, green and yellow and the key cap is always transparent. All versions are obtainable in two different key cap sizes. The contact system is based on silver sliding contacts, resulting in a self -cleaning process. The switch has two pole version with normally open functions. . Changes that contribute to technical improvement are subject to alternations 1996 Datum Name W eisen Weisen. HDT NO 2pole, IP65, illuminated Data sheet / Specifications Bearb 10.09. . epr. 04.12.07 G Vert. e d c b a 9427 8828 8513 8349 8016 7301 09.11.07 04.05.04 27.08.02 14.11.01 03.02.00 Datum W eisen. W eisen. W eisen. W eisen. W eisen. Name EDV-Datenblatt nicht manuell ändern H 105. 9296.201 Index: e 10.09.96 W eisen. Zu Änd. Blatt 1 von 4 Verteiler nach H 150.9304 Pos.C05 Technical data 1. Mechanical data Actuating force Contact travel End contact travel End Stop strength (DIN41640 Teil19) Lifetime (IEC 512-5 Test 9a) IP65 NO 2,5N 0,5N 1,2mm 0,2mm 2,5mm 0,1mm >100N 5 >5x10 Operations 2. Electrical data Switching voltage max. Switching current max. Lifetime (rated interrupting capacity 1,2W). Initial contact resistance, new (IEC 512-2, mV-Methode 5 Initial contact resistance, after 2x10 cycles Insulation resistance (IEC 512-2) Contact bounce time 3. Other data Ambient temperature Storage temperature Cleaning agent proof (gem. IEC 68-2-45) Flux proof (gem. DIN 41640 Teil84) IP65 Degree of protection 4. Materials Socket, cover, contact unit, carrier ring Button illuminated Sealing ring Terminals Contacts 5. Packaging 50V DC / 60V AC 200 mA 5 > 2x10 cycles < 30mΩ < 50mΩ 10 > 10 Ω Typ. 0,5ms -40°C...+85°C -40°C...+85°C Zestron given IP65 Thermoplast PA 4.6 Thermoplast PES Silikon tempered CuZn, 3µm Ag, hot tinned CuBe HM, 5µmAg in boxes á 100 Changes that contribute to technical improvement are subject to alternations 1996 Gepr. Vert. e d c b a 9427 8828 8513 8349 8016 7301 09.11.07 04.05.04 27.08.02 14.11.01 03.02.00 10.09.96 Datum 04.12.07 Name W eisen Weisen. HDT NO 2pole, IP65, illuminated Data sheet / Specifications Bearb. 10.09. W eisen. W esien. W eisen. W eisen. W eisen. W eisen. Name EDV-Datenblatt nicht manuell ändern H 105.9296.201 Index: e Zu Änd. Datum Seite 2 von 4 Verteiler nach H 150.9304 Pos.C05 6. LED Data 6.1 Maximum ratings Part number Light colour Forward current, DC Power dissipation 6.2 Characteristics (typ.at TU = 25°C) Forward voltage at IF = 10mA, UF typ. Luminous intensity at IF = 10mA, IV typ. Viewing angle φ typ. Peak wave length λ peak typ. Peverse voltage UR typ. 2,0 (