2040.0809

MSU 250 Fuses https://www.schurter.com /PG01_2 OU T Subminiature Fuse, 8.5 mm, Time-Lag T, Telecom, 250 VAC, 63 VDC See below: IEC 60127-3 · 250 VAC · Time-Lag T Approvals and Compliances Applications - xDSL and ADSL linecards and modems References Packaging Details Corresponding Fuseholder   Last order date: 31.12.2016 We recommend for new applications the type   MST 250  MST 250 is fully compatible to MSU 250 Weblinks Technical Data   250 VAC, 63 VDC  0.25 - 3.15 A 35 A - 50 A Time-Lag T PCB,THT -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoplastic, UL 94V-0 Tin-Plated Copper 0.53 g 0 °C to 40 °C, max. 70% r.h. , Type, Rated current, Rated Voltage, Characteristic, Certification marks AS Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking E- pdf data sheet, html datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product Soldering Methods Solderability Resistance to Soldering Heat Case Resistance Flammability Current Carrying Capacity Moisture Resistance Test Vibration, High Frequency Mechanical Shock Resistance to Solvents Terminal Strength Wave Soldering Profile 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb acc. to EIA/IS-722, Test 4.7 >100 MΩ (between leeds and body) UL 94V-0 (acc. to EIA/IS-722, Test 4.12) acc. to EIA/IS-722, Test 4.3.3 (acc. to EIA/IS-722, Test 4.4.3) MIL-STD-202, Method 204 Condition D (acc. to EIA/IS-722, Test 4.9) MIL-STD-202, Method 215 Tensile load min. 9 N (acc. to EIA/IS-722, Test 4.5.1) Approvals and Compliances PH Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Circuit Protection 1 MSU 250 Fuses https://www.schurter.com /PG01_2 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: MSU 250 Certification Body Description VDE Approvals VDE VDE Certificate Number: 40013529 UL Approvals UL UL File Number: E41599 CCC Approvals CCC CCC Certificate Number: 2003010207100519 T Certificates Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 248-14 Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Designed for applications acc. IEC/UL 60950 Low voltage fuses - Part 14: Additional fuses Application standards Compliances The product complies with following Guide Lines Identification Details CE declaration of conformity RoHS China RoHS Initiator Description SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836 SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. AS REACH IEC 60950-1 includes the basic requirements for the safety of information technology equipment. E- Application standards where the product can be used Organization OU Approval Logo Dimension [mm]    8.5 mm ø 8.5 0.5 8.5 +0.1 0 1 18.8 3.2 4.3 0.5 8.5 ø 8.5 ø 0.64 5.08 PH 3.2 5.08 ø 0.64 5.08 Drilling diagram Pre-Arcing Time Rated Current In 0.25 A - 3.15 A 2 1.5 x In min. 2.1 x In max. 60 min 120 s 2.75 x In min. 2.75 x In max. 400 ms 10 s Circuit Protection 4.0 x In min. 4.0 x In max. 150 ms 3s 10.0 x In min. 10.0 x In max. 20 ms 150 ms MSU 250 Fuses https://www.schurter.com /PG01_2 Time-Current-Curves T 100000 10000 1000 OU Time in Seconds 100 10 1 0.1 0.01 0.001 10 1 All Variants Voltage Drop 1.0 In typ. [mV] 0.25 250 120 0.315 250 120 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 0.25 Power Dissipation 1.5 In typ. [mW] Melting I²t 10.0 In typ. [A²s] GR-1089CORE [A] UL60950 80 0.6 > 14.0 25.3 l 35.0 l 2040.0609 100 0.8 > 14.0 29.2 l 35.0 l 2040.0610 AS Rated Voltage [VAC] Rated Current [A] E- Multiple of Rated Current In ITU - ITU Lightning Power Surge[A] Induc- ITU - Power Contact[A] S L T Order Number 250 110 100 1.1 > 14.0 39.5 l 35.0 l 2040.0611 250 100 100 2.5 > 14.0 57 l 35.0 l 2040.0612 250 90 100 4 > 14.0 250 80 200 8 > 14.0 l 67 l 35.0 l 2040.0613 67 l 35.0 l 2040.0614 250 70 200 12 > 14.0 l 67 l 35.0 l 2040.0615 250 70 300 15 > 14.0 l 67 l 35.0 l 2040.0616 250 60 300 30 > 14.0 l 67 l 50.0 l 2040.0617 250 60 300 34 > 14.0 l 67 l 50.0 l 2040.0618 250 50 400 55 > 14.0 l 67 l 50.0 l 2040.0619 250 50 500 76 > 14.0 l 67 l 50.0 l 2040.0620 250 120 80 0.6 > 14.0 25.3 l 35.0 l 2040.0709 250 120 100 0.8 > 14.0 29.2 l 35.0 l 2040.0710 250 110 100 1.1 > 14.0 39.5 l 35.0 l 2040.0711 0.5 250 100 100 2.5 > 14.0 57 l 35.0 l 2040.0712 0.63 250 90 100 4 > 14.0 67 l 35.0 l 2040.0713 PH 0.315 0.4 0.8 250 80 200 8 > 14.0 l 67 l 35.0 l 2040.0714 1 250 70 200 12 > 14.0 l 67 l 35.0 l 2040.0715 1.25 250 70 300 15 > 14.0 l 67 l 35.0 l 2040.0716 1.6 250 60 300 30 > 14.0 l 67 l 50.0 l 2040.0717 2 250 60 300 34 > 14.0 l 67 l 50.0 l 2040.0718 2.5 250 50 400 55 > 14.0 l 67 l 50.0 l 2040.0719 3.15 250 50 500 76 > 14.0 l 67 l 50.0 l 2040.0720 0.25 250 120 80 0.6 > 14.0 25.3 l 35.0 l 2040.0809 0.315 250 120 100 0.8 > 14.0 29.2 l 35.0 l 2040.0810 0.4 250 110 100 1.1 > 14.0 39.5 l 35.0 l 2040.0811 Circuit Protection 3 MSU 250 Rated Voltage [VAC] Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.5 In typ. [mW] Melting I²t 10.0 In typ. [A²s] 0.5 250 0.63 250 GR-1089CORE [A] UL60950 ITU - ITU Lightning Power Surge[A] Induc- 100 100 2.5 > 14.0 57 l 90 100 4 > 14.0 67 l 0.8 250 80 200 8 > 14.0 l 67 l 1 250 70 200 12 > 14.0 l 67 l 1.25 250 70 300 15 > 14.0 l 67 l 250 60 300 30 > 14.0 2 250 60 300 34 > 14.0 l 67 l S L T Order Number 35.0 l 2040.0812 35.0 l 2040.0813 35.0 l 2040.0814 35.0 l 2040.0815 35.0 l 2040.0816 50.0 l 2040.0817 OU 1.6 ITU - Power Contact[A] T Rated Current [A] Fuses https://www.schurter.com /PG01_2 l 67 l 50.0 l 2040.0818 2.5 250 50 400 55 > 14.0 l 67 l 50.0 l 2040.0819 3.15 250 50 500 76 > 14.0 l 67 l 50.0 l 2040.0820 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER IEC: 35 A @ 250 VAC UL: 35 A @ 250 VAC / 50 A @ 63 VDC S = L = T= Plastic Bag (100 pcs.) Bulk (100 pcs.) Taped 36 cm Reel (750 pcs.) 4 Circuit Protection 01.09.2019 PH AS E- Packaging Unit   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.