3-103-114

MGA-A Fuses https://www.schurter.com /PG01_2 Solid State, Thin Film, SMD 1206, Super-Quick-Acting FF, 125 VAC, 125 VDC, 150 °C UL 248-14 · 125 VAC · 125 VDC · Super-Quick-Acting FF Description - Highest Breaking Capacity Rating for a 1206 on the market: 300A@125VDC Unique Selling Proposition - No tin whiskers, no tin dendrites - No leaded coating (RoHS conform) - Similar fuse qualification as in MIL-PRF 23419 - Hermetically sealed and robust construction See below: Approvals and Compliances Applications - Industrial grade space application - Avionics - Medical Equipment - Defense Other versions on request - Different Up Screenings - Extensive Test Reports - Visual Inspection according MIL-PRF 55342 Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Landing Page Technical Data Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking   32 - 125 VAC, 125 VDC 0.2 - 5 A 50 A Super-Quick-Acting FF PCB,SMT -55 °C to 125 °C 55/125/56 acc. to IEC 60068-1 Ceramics Gold-Plated Nickel 0.03 g 0 °C to 60 °C, max. 70% r.h. none Soldering Methods Solderability Resistance to Soldering Heat Moisture Sensitivity Level Damp heat, steady state Moisture Resistance Test Thermal Shock Operational Life Load Humidity Test Vibration, High Frequency Mechanical Shock ESD classification Resistance to Solvents Terminal Strength Thermal Vacuum Reflow, Wave Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 °C / 10 sec acc. to IEC 60068-2-58 Test TD, Level 1 MSL 1, J-STD-020  IEC 60068-2-78   (40 °C, 93% RH, 56 days) MIL-STD-202, Method 106 (50 cycles in a temp./mister chamber) IEC 60068-2-14 (200 air-to-air cycles from -55 to +150°C) 2000h @ 0.63 x In @ 125°C MIL-STD-202, Method 103 0.1 x In @ 0.85 r.H. @ 85°C IEC 60068-2-6 Shock 20 g, 20 min, 10-2000 Hz, 12 cyc. IEC 60068-2-27 (12 shocks, 1600 g, 0.5 ms) JEDEC JS-001-2014, Class 1B   (500 to < 1000 V) Cleaning with common solvents EIA/IS-722, Test 4.5.5 (Deflection of board 1 mm for 1 minute) ESA ESCC 4008 Para. 8.15  Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Circuit Protection 1 MGA-A Fuses https://www.schurter.com /PG01_2 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: MGA-A Approval Logo Certificates Certification Body Description UL Approvals UL UR File Number: E41599 Design Standard Description Designed according to UL 248-14 Low voltage fuses - Part 14: Supplemental fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Dimension [mm] Reflow soldering pads   2  3.2 mm 1.55 Identification 1.5 1.1 0.5 3.2 2 Circuit Protection 1.55 MGA-A Fuses https://www.schurter.com /PG01_2 Derating Curves   140 130 120 110 100 90 80 70 60 50 40 -60 -40 -20 0 20 23 40 60 80 100 120 140 160 Pre-Arcing Time Rated Current In 0.2 A - 5 A 1.0 x In min. 2.5 x In max. 4h 5s Time-Current-Curves 0.1 200 250 375 500 750 1 1.5 2 2.5 3 4 5 Time in Seconds 0.01 mA mA mA mA mA A A A A A A A 0.001 0.0001 0.00001 0.1 1 10 Current in Amperes All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] Breaking Capacity Voltage Drop 1.0 In typ. [mV] Melting I²t 10.0 In typ. [A²s] Packaging [PCS] 0.2 125 125 1) 220 0.0001 l 0.2 125 125 1) 220 0.0001 0.2 125 125 1) 220 0.0001 0.2 125 125 1) 220 0.25 125 125 1) 0.25 125 125 0.25 125 0.25 125 0.375 125 Order Number 100 3-103-085 l 750 3-103-086 l 3000 3-103-087 0.0001 l 10000 3-103-088 200 0.00013 l 100 3-103-089 1) 200 0.00013 l 750 3-103-090 125 1) 200 0.00013 l 3000 3-103-091 125 1) 200 0.00013 l 10000 3-103-092 125 1) 150 0.00024 l 100 3-103-093 Circuit Protection █ █ █ 3 MGA-A Fuses https://www.schurter.com /PG01_2 Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] Breaking Capacity Voltage Drop 1.0 In typ. [mV] Melting I²t 10.0 In typ. [A²s] 0.375 125 125 1) 150 0.00024 l 750 3-103-094 0.375 125 125 1) 150 0.00024 l 3000 3-103-095 0.375 125 125 1) 150 0.00024 l 10000 3-103-096 0.5 125 125 1) 135 0.0004 l 100 3-103-097 0.5 125 125 1) 135 0.0004 l 750 3-103-098 0.5 125 125 1) 135 0.0004 l 3000 3-103-099 0.5 125 125 1) 135 0.0004 l 10000 3-103-100 0.75 125 125 1) 95 0.0011 l 100 3-103-101 0.75 125 125 1) 95 0.0011 l 750 3-103-102 0.75 125 125 1) 95 0.0011 l 3000 3-103-103 0.75 125 125 1) 95 0.0011 l 10000 3-103-104 1 125 125 1) 105 0.0048 l 100 3-103-105 1 125 125 1) 105 0.0048 l 750 3-103-106 1 125 125 1) 105 0.0048 l 3000 3-103-107 3-103-108 Packaging [PCS] Order Number 1 125 125 1) 105 0.0048 l 10000 1.5 125 125 1) 95 0.011 l 100 3-103-109 1.5 125 125 1) 95 0.011 l 750 3-103-110 1.5 125 125 1) 95 0.011 l 3000 3-103-111 1.5 125 125 1) 95 0.011 l 10000 3-103-112 2 125 125 1) 95 0.019 l 100 3-103-113 2 125 125 1) 95 0.019 l 750 3-103-114 2 125 125 1) 95 0.019 l 3000 3-103-115 2 125 125 1) 95 0.019 l 10000 3-103-116 2.5 125 125 1) 90 0.03 l 100 3-103-117 2.5 125 125 1) 90 0.03 l 750 3-103-118 2.5 125 125 1) 90 0.03 l 3000 3-103-119 2.5 125 125 1) 90 0.03 l 10000 3-103-120 3 125 125 1) 90 0.043 l 100 3-103-121 3 125 125 1) 90 0.043 l 750 3-103-122 3 125 125 1) 90 0.043 l 3000 3-103-123 3 125 125 1) 90 0.043 l 10000 3-103-124 4 63 125 2) 80 0.09 l 100 3-103-125 4 63 125 2) 80 0.09 l 750 3-103-126 4 63 125 2) 80 0.09 l 3000 3-103-127 4 63 125 2) 80 0.09 l 10000 3-103-128 5 32 125 3) 80 0.14 l 100 3-103-129 5 32 125 3) 80 0.14 l 750 3-103-130 5 32 125 3) 80 0.14 l 3000 3-103-131 5 32 125 3) 80 0.14 l 10000 3-103-132 █ █ █ █ █ █ █ █ █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) 50 A @ 125 VAC / 300 A @ 125 VDC 2) 50 A @ 63 VAC / 50 A @ 125 VDC / 300 A @ 32 VDC 3) 50 A @ 32 VAC / 50 A @ 125 VDC / 300 A @ 32 VDC Packaging Unit   100 pcs. in tape in ESD-plastic bag 750 pcs. in tape [W: 8mm and P1: 4mm] on reel [A: 18cm] 3000 pcs. in tape [W:8mm and P1: 4mm]on reel [A: 33cm] 10000 pcs. in tape [W: 8mm and P1: 4mm] on reel [A: 33cm] 09.08.2023 acc. IEC 60286-3 Type 2a 4 Circuit Protection The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.