6610-5
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
IEC Appliance Outlet F, Snap-in Mounting, Front Side, IDC Terminal, integrated Light Pipe, Color Coding
Arrangement "cross", white
(wires cross to pin axis)
Arrangement "along"
(wires along to pin axis)
Arrangement "along", grey, view from rear side
(wires along to pin axis)
Order required accessories separately
F
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Snap-in version , front side
- Connector , Pin temperature 70 °C , Protection class I
- Wire gauge 1.5mm²/2.5mm²/14AWG/12AWG
- Light Pipe guidance
- Light Pipe as an accessory, has to be ordered seperately
- Live contact as PCB terminal
- IDC terminals acc. to IEC 60998-2-3 for solid wires
Unique Selling Proposition
- IDC terminals for efficient wiring
- Design for slim light pipe guidance
- Light pipe for status indication, optional with 1, 2 or without light pipe
quidance
- Cord retention systems of V-Lock, P-Lock and TwyLock supported
Characteristics
- Protection cover can be used as wire press
- Cross and along orientation
- Ideal for intelligent PDU applications
- Suitable for use in equipment according to IEC/UL 62368-1
Other versions on request
- Live contact also available as IDC, solder or quick connect terminal
- Versions for 1 mm² cross wire section
- Samples available in grey and white
References
Alternative: version without light pipe
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Mounting instruction, Detailed
request for product, Landing Page, Video
The outlet is compatible with V-Lock and in the along variant also with side latch mechanisms. The V-Lock connector is equipped with a notch intended for use with the latching cordset. The cord latching systems prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Allowable Operation Temperature
IP-Protection
Protection against electric
shock
Terminal
Panel Thickness S
Material: Housing
10 A / 250 VAC; 50 Hz
15 A / 250 VAC; 60 Hz
-25 °C to 70 °C
Appliance inlet/-outlet
F acc. to IEC 60320-3
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
IDC terminals
Snap-in,0.8/1/1.5/2/2.5/3 mm
(other on request)
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Connectors
1
6610-5
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6610-5
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40035679
UL Approvals
UL
UR File Number: E103791
CCC Approvals
CCC
CCC Certificate Number: 2018180204005165
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60320-3
Appliance couplers for household and similar general purposes
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
Connectors
6610-5
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Dimensions [mm]
Arrangement "cross"
(wires cross to pin axis)
32.3
R2
35.8
±0.1
.
ax
B
m
13.5 13.5
A
24.8
28
+0.2
0
9.6
.5
37.1
R4
ø 2.8
Version "along" (wires along to pin axis)
37.1
ø 2.8
.
ax
m
B
R4
13.5 13.5
A
24.3
28
±0.1
9.6
.5
R2
35.8
+0.2
0
32.8
The integration of light pipes in the appliance outlet provides status indication in smart PDUs.
Assembly Instructions
Wire press version "cross"
5.4 ± 0.05
1.5
min. 8
5.4 ± 0.05
1.5
min. 8
4.55 ± 0.05
2.45 ± 0.05
9.45 ± 0.05
Wire press version "along"
+0.10
0
6.65 ±0.05
6 ± 0.10
1
.R
2.8
m
ax
+0.10
0
2.8
30 ± 0.10
+ 0.10
0
13.1
22.5
6 ± 0.10
3.5
±0.10
3.5
±0.10
14
+ 0.10
0
±0.10
- The above mentioned dimensions are recommended when using an assembly tool.
- Use the cover or an assembly tool, to push the wires into the IDC terminals.
- The assembly force depends on the wire used and may require as much as 900 N.
- Press the wires into the IDC terminals until the wires touch with the plastic socket of the 6610-5 when using a tool.
- When using the cover be sure that it is properly mounted.
- The maximum diameter of the wire (including insulation) is 3.6 mm for along, 3.5 mm for cross version.
- The correct installation of the wires is essential for proper function of the 6610-5 in the end equipment.
Connectors
3
6610-5
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
All Variants
Alignment 1)
Terminal type live contact
Conductor cross section
Panel Thickness s
[mm]
Light pipe L side
Light pipe N side
Color
Order Number
along
PCB terminals
1.5 mm² / 14 AWG
1.5
l
l
black
3-104-307
along
PCB terminals
2.5 mm² / 12 AWG
1.5
l
l
black
3-104-298
along
PCB terminals
2.5 mm² / 12 AWG
1.5
l
along
PCB terminals
2.5 mm² / 12 AWG
1.5
cross
PCB terminals
1.5 mm² / 14 AWG
1.5
cross
PCB terminals
1.5 mm² / 14 AWG
1.5
cross
PCB terminals
2.5 mm² / 12 AWG
1.5
l
cross
PCB terminals
2.5 mm² / 12 AWG
1.5
l
cross
PCB terminals
2.5 mm² / 12 AWG
1.5
l
black
3-104-299
l
black
3-104-300
l
black
3-104-319
l
black
3-104-320
l
black
3-103-018
black
3-104-311
black
3-104-312
l
1) The alignment describes whether the wires are along or across to the connector pin axis.
█ Most Popular.
Availability for all products can be searched real-time: https://www.schurter.com/en/info-center/support-tools/stock-check-distributors
Packaging unit
100 Pcs
Required Accessory
Description
Light_Pipe
Transparent Plexiglas Light Pipe
Mating Inlets/Plugs
Category / Description
Plug Overview complete
4732, Mounting: Power Cord, Plug: IEC E, Cable
4732
4735, Mounting: Power Cord, Plug: IEC E, Cable
4735
9009, Mounting: Plug: IEC E, Screw clamps
9009
4733, Mounting: Power Cord, Plug: IEC E, Cable
4733
4736, Mounting: Power Cord, Plug: IEC E, Cable
4736
...
Mating Inlets/Plugs shuttered
VAC13KS, Interconnection, V-Lock cord retaining, 0.6 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
3-100-354
VAC13KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C13, SVT 3x18 AWG, black
3-100-361
VAC13KS, Interconnection, V-Lock cord retaining, 1.8 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
3-100-734
VAC13KS, Interconnection, V-Lock cord retaining, 2.0 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
6051.2007
VAC13KS, Interconnection, V-Lock cord retaining, 1.5 m, Connector IEC C13, H05VV-F3G0.75, black
6051.2067
...
4
Connectors
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
28.03.2024
Interconnection Cord Overview complete
