3-104-862

FMAC NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 1-stage filter for 3-phase systems Case 4C-50 See below: Approvals and Compliances Description Applications - Terminals for three phases and ground - 1 stage - Very high attenuation - Industrial or low leakage current versions - Voltage rating 520 VAC for world wide acceptance - Protection against interference voltage from the mains - Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters - Variants Machine Safety suitable for machine applications according to IEC 60204-1 - Suitable for use in equipment according to IEC/UL 62368-1 Unique Selling Proposition - Compact design with small footprint - Single-stage filter for high efficiency - Light weight design - Wide temperature range References Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Detailed request for product, Microsite Technical Data Rated Current Rated voltage Approval for Overload Current Dielectric Strength ␣ Number of Filter Stages Weight Material: Housing Sealing Compound   16 - 230 A 300/520 VAC, 50/60 Hz 16 - 230 A @ 50 °C / 300/520 VAC; 50/60 Hz 1.5 x Ir for 1 minute, per hour > 2.25 kVDC between L-L > 2.75 kVDC between L-PE Test voltage 2 sec 1-stage 0.9 - 4 kg Metal  UL 94V-0  Mounting Terminal Operating Temperature Climatic Category Degree of Protection Protection Class MTBF Screw-on mounting on chassis  Screw clamps  -40 °C to 100 °C 40/100/21 acc. to IEC 60068-1 IP20 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 > 200'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FMAC NEO Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40049000 UL Approvals UL UR File Number: E72928 EMC Products 1 FMAC NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to UL 1283 Passive filters for suppressing electromagnetic interference Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] Case 5A-4 91 max. 60 157 max. EMC Products 12 LOAD M6 5-7 [Nm] (2x) 121 max. 2 6.5 ±0.3 4 mm² max. 0.5 [Nm] (6x) 23 81 max. 90 ±0.3 LINE 0 92.5 -1 110 max. 30 ±0.2 64 FMAC NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Case 5A-10 90 ±0.3 M6 5-7 [Nm] (2x) 121 max. 12 LINE LOAD 0 23 81 max. 10 mm² max. 1.2 [Nm] (6x) 92.5 -1 110 max. 91 max. 58 6.5 ±0.3 30 ±0.2 64 157 max. Case 5B-10 100 ±0.3 LOAD LINE 0 23 95 max. 10mm² max. 1.2 [Nm] (6x) 106.5-1 124 max. 91 max. 57 6.5 ±0.3 30 ±0.2 130 max. 165 max. 12 M6 5-7 [Nm] (2x) 63 Case 5B-16 M6 5-7 [Nm] (2x) 130 max. 30 max. 95 59 12 LOAD LINE 106.5 6.5 ±0.3 91 max. 51 16mm² 2-2.2 [Nm] (6x) 0 -1 124 max. 30 ±0.2 100 ±0.3 170 max. EMC Products 3 FMAC NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Case 4C-25 max. 200 max. 161 90 ±0.3 6.5±0.3 max. 101 60 36 max. 106 LOAD LINE max. 134 0 120-1 25 mm2 2 Nm 12 M6 3-4 Nm 70 Case 4C-50 max. 248 max. 161 90 ±0.3 6.5±0.3 max. 101 46 60 max. 106 M6 5-7 Nm 12 LINE LOAD 0 120 -1 max. 134 50 mm2 max. 6 Nm 26 Case 4D 95 mm2 3.5-14.7 Nm 68 M10 max. 20 Nm 42.5 29 4 EMC Products max. 151 70 max. 121 LOAD LINE max. 150 0 135 -1 max. 301 max. 201 130 ±0.3 6.5±0.3 FMAC NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Diagrams Industrial version 1) Low leakage current version L1 L1’ L1 L1’ L2 L2’ L2 L2’ L3 L3’ L3 L3’ PE PE PE PE 1) Line 1) 1) Line Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Industrial version 16 A 25 A 36 A 50 A 64 A 80 A 110 A 180 A 230 A EMC Products 5 FMAC NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Low leakage current version 16 A 25 A 36 A 50 A 64 A All Variants Rated Current @ Ta 50°C [A] Filter Type Machine Safety Tripped Power Dissipation [W] Contact Resistance [mΩ] Leakage Current [mA] @ 440V, 60Hz 1) Weight [kg] Screw clamps [mm2] 2) Housing Order Number 16 Industrial version l 1.6 6.2 10.5 0.9 kg 4 5A-4 25 Industrial version l 1.9 3 10.7 1.1 kg 10 5A-10 3-138-284 36 Industrial version l 3.2 2.4 10.7 1.2 kg 10 5B-10 3-138-285 50 Industrial version l 6 2.4 11.4 1.2 kg 10 5B-10 3-138-286 64 Industrial version l 3.7 0.9 11.4 1.3 kg 16 5B-16 3-138-287 3-138-283 80 Industrial version l 4 0.6 12.2 1.4 kg 25 4C-25 3-138-288 110 Industrial version l 4.9 0.4 12.2 2.5 kg 50 4C-50 3-138-289 180 Industrial version l 4.4 0.1 12.2 3 kg 95 4D 3-138-290 230 Industrial version l 5.8 0.1 13.1 4 kg 95 4D 3-138-291 16 Low leakage current version l 1.6 6.2 1.4 0.9 kg 4 5A-4 3-138-292 25 Low leakage current version l 1.9 3 3 1.1 kg 10 5A-10 3-138-293 36 Low leakage current version l 3.2 2.4 3 1.2 kg 10 5B-10 3-138-294 50 Low leakage current version l 6 2.4 3 1.2 kg 10 5B-10 3-138-296 64 Low leakage current version l 3.7 0.9 3 1.3 kg 16 5B-16 3-138-297 16 Industrial version 1.6 6.2 10.5 0.9 kg 4 5A-4 3-104-580 25 Industrial version 1.9 3 10.7 1.1 kg 10 5A-10 3-104-581 36 Industrial version 3.2 2.4 10.7 1.2 kg 10 5B-10 3-104-582 50 Industrial version 6 2.4 11.4 1.2 kg 10 5B-10 3-104-583 64 Industrial version 3.7 0.9 11.4 1.3 kg 16 5B-16 3-104-584 80 Industrial version 4 0.6 12.2 1.4 kg 25 4C-25 3-104-585 █ █ █ 110 Industrial version 4.9 0.4 12.2 2.5 kg 50 4C-50 3-104-586 █ 180 Industrial version 4.4 0.1 12.2 3 kg 95 4D 3-104-587 █ 230 Industrial version 5.8 0.1 13.1 4 kg 95 4D 3-104-588 █ 16 Low leakage current version 1.6 6.2 1.4 0.9 kg 4 5A-4 3-104-862 █ 25 Low leakage current version 1.9 3 3 1.1 kg 10 5A-10 3-104-841 36 Low leakage current version 3.2 2.4 3 1.2 kg 10 5B-10 3-104-872 █ 50 Low leakage current version 6 2.4 3 1.2 kg 10 5B-10 3-104-873 █ 6 EMC Products FMAC NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Rated Current @ Ta 50°C [A] Filter Type 64 Low leakage current version Machine Safety Tripped Power Dissipation [W] Contact Resistance [mΩ] Leakage Current [mA] @ 440V, 60Hz 1) Weight [kg] Screw clamps [mm2] 2) Housing 3.7 0.9 3 1.3 kg 16 5B-16 Order Number 3-104-874 █ █ Most Popular. Availability for all products can be searched real-time: https://www.schurter.com/en/info-center/support-tools/stock-check-distributors 1) Leakage current according IEC 60939-1 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information https://www.schurter.com/en/FAQ#10 1 Pcs  28.03.2024 Packaging unit  The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. EMC Products 7