3-108-701

FMAD NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 1-stage filter for 3-phase systems Case 5B-16 Case 5A-4 See below: Approvals and Compliances Description - Terminals for three phases, neutral conductor and ground - 1 stage - Very high attenuation - Industrial or low leakage current versions Unique Selling Proposition - Compact design with small footprint - Single-stage filter for high efficiency - Light weight design - Wide temperature range Applications - Voltage rating 520 VAC for world wide acceptance - Protection against interference voltage from the mains - Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters - Variants Machine Safety suitable for machine applications according to IEC 60204-1 - Suitable for use in equipment according to IEC/UL 62368-1 References Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Detailed request for product, Microsite Technical Data Rated Current Rated voltage Approval for Overload Current Dielectric Strength ␣ Number of Filter Stages Weight Material: Housing Sealing Compound   16 - 230 A 300/520 VAC, 50/60 Hz 16 - 230 A @ 50 °C / 300/520 VAC; 50/60 Hz 1.5 x Ir for 1 minute, per hour > 2.25 kVDC between L-L > 2.75 kVDC between L-PE Test voltage 2 sec 1-stage 0.9 - 4.1 kg Metal  UL 94V-0  Mounting Terminal Operating Temperature Climatic Category Degree of Protection Protection Class MTBF Screw-on mounting on chassis  Screw clamps  -40 °C to 100 °C 40/100/21 acc. to IEC 60068-1 IP20 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 > 200'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FMAD NEO Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40049000 UL Approvals UL UR File Number: E495089 EMC Products 1 FMAD NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to UL 1283 Passive filters for suppressing electromagnetic interference Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] Case 5A-4 91 max. 60 157 max. EMC Products 12 LOAD M6 5-7 [Nm] (2x) 121 max. 2 6.5 ±0.3 4 mm² max. 0.5 [Nm] (8x) 34.5 81 max. 90 ±0.3 LINE 0 92.5 -1 110 max. 30 ±0.2 64 FMAD NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Case 5A-10 90 ±0.3 M6 5-7 [Nm] (2x) 121 max. 12 LINE LOAD 0 34.5 81 max. 10 mm² max. 1.2 [Nm] (8x) 92.5 -1 110 max. 91 max. 58 6.5 ±0.3 30 ±0.2 64 157 max. Case 5B-10 100 ±0.3 LOAD LINE 0 34.5 95 max. 10mm² max. 1.2 [Nm] (8x) 106.5-1 124 max. 91 max. 57 6.5 ±0.3 30 ±0.2 130 max. 165 max. 12 M6 5-7 [Nm] (2x) 63 Case 5B-16 M6 5-7 [Nm] (2x) 130 max. 45 max. 95 59 12 LOAD LINE 106.5 6.5 ±0.3 91 max. 51 16mm² 2-2.2 [Nm] (8x) 0 -1 124 max. 30 ±0.2 100 ±0.3 170 max. EMC Products 3 FMAD NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Case 5C-25 90 ±0.3 101 max. 60 6.5 ±0.3 161 max. 12 M6 3-4 [Nm] (2x) 136 max. 54 LINE 0 LOAD 25mm² 2 [Nm] (8x) 150-1 165 max. 30 ±0.2 70 201 max. Case 5C-50 30 ±0.2 90 ±0.3 101 max. 46 6.5 ±0.3 (4x) M6 Max. 7 [Nm] (2x) 161 max. 136 max. 12 90 LOAD LINE 0 150 -1 165 max. 50 mm² max. 6 [Nm] (8x) 26 248 max. Case 5D-95 201 max. 301 max. 4 EMC Products 151 max. 105 M10 max. 20 [Nm] (2x) 29 max. 157 68 95mm² 3.5-14.7 [Nm] (8x) 48 LOAD LINE 0 171-1 186 max. 30 ±0.2 6.5 ±0.3 (4x) 130 ±0.3 FMAD NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Diagrams Industrial version 1) Low leakage current version L1 L1’ L1 L1’ L2 L2’ L2 L2’ L3 L3’ L3 L3’ N N N N PE PE PE PE 1) Line 1) 1) Line Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Industrial version 16 A 25 A 36 A 50 A 64 A 80 A 110 A 180 A 230 A EMC Products 5 FMAD NEO 3-Phase AC Filters / DC Filters https://www.schurter.com /PG80 Low leakage current version 16 A 25 A 36 A 50 A 64 A All Variants Rated Current @ Ta 50°C [A] Filter Type 16 25 Machine Safety Tripped Power Dissipation [W] Contact Resistance [mΩ] Leakage Current [mA] @ 440V, 60Hz 1) Weight [kg] Screw clamps [mm2] 2) Housing Order Number Industrial version 1.5 5.7 10.5 0.9 kg 4 5A-4 3-108-700 Industrial version 1.6 2.5 10.7 1.1 kg 10 5A-10 3-108-701 █ 36 Industrial version 2.1 1.65 10.7 1.3 kg 10 5B-10 3-108-712 █ 50 Industrial version 4.1 1.65 11.4 1.3 kg 10 5B-10 3-108-713 █ 64 Industrial version 3.9 0.94 11.4 1.35 kg 16 5B-16 3-108-714 █ 80 Industrial version 5.2 0.82 12.2 1.45 kg 25 5C-25 3-108-715 █ 110 Industrial version 6.3 0.52 12.2 2.5 kg 50 5C-50 3-108-716 █ 180 Industrial version 12 0.37 12.2 3.1 kg 95 5D-95 3-108-717 █ 230 Industrial version 14.3 0.27 13.1 4.1 kg 95 5D-95 3-108-718 █ 16 Low leakage current version 1.5 5.7 1.4 0.9 kg 4 5A-4 3-109-852 25 Low leakage current version 1.6 2.5 3 1.1 kg 10 5A-10 3-109-853 36 Low leakage current version 2.1 1.65 3 1.3 kg 10 5B-10 3-109-854 50 Low leakage current version 4.1 1.65 3 1.3 kg 10 5B-10 3-109-855 64 Low leakage current version 3.9 0.94 3 1.35 kg 16 5B-16 3-109-856 █ █ █ Most Popular. Availability for all products can be searched real-time: https://www.schurter.com/en/info-center/support-tools/stock-check-distributors 1) Leakage current according IEC 60939-1 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information https://www.schurter.com/en/FAQ#10 1 Pcs  28.03.2024 Packaging unit  6 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.