3-108-976

MSM DP 22 Metal Line Switches https://www.schurter.com /PG70 Momentary action switch double pole RI homogeneous green RI dotted red See below: Approvals and Compliances Description - Available in version Standard, lettered, with Point Illumination or Ring Illumination - Assembly method: clip micro-switch into the saddle, secure switch using mounting nut - Equipped with flat-pin plugs to permit fast connection Characteristics - Housing and actuating area material: high-quality stainless steel for use in harsh environments (see technical data) - Variety of design options regarding size, colour, illumination, connection or lettering - Switching voltage from 30 VDC to 250 VAC, switching current from 0.1 A to 10 A - double pole version with two switching contact sets, can be wired as NO, NC or as change-over - IP-Protection: IP 67 from front side to contact area, Micro-Switch is available in versions IP 40 or IP 67 References Alternative: Standard version   MSM DP 30;  MSM 16;  MSM 30  Alternative: switch with latching function:   MSM LA 19  Alternative: switch with backlighted illumination:   MSM CS 19;  MSM CS 22  Alternative: Other diameter   MSM DP 19  Weblinks html-datasheet, General Product Information, CAD-Drawings, Product News, Detailed request for product Switches 1 MSM DP 22 Metal Line Switches https://www.schurter.com /PG70 Technical Data Electrical Data Switching Function Number of Poles Supply Voltage   N.O., N.C., N.O./N.C.  2-pole  24 VDC * Ring Illumination , Point Illumination without series resistor , LED operating data are listed in separate table 4 kV MSM ST / MSM LE Impulse Withstand Voltage (ESD) Micro Switch 5 A / 125 VAC or 3 A / 250 VAC, IP40 Contact Material Ag  Switching Voltage max. 125 / 250 VAC Switching Current max. 5 / 3 A Rated Switching Capacity 750 W Lifetime 0.2 million actuations at Rated Switching Capacity Contact Resistance  100 MΩ Duration of Bounce