DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
IEC Appliance Inlet C14 with Filter, Circuit Breaker TA35 (recessed)
Screw-on with IP 67
C14
Screw-on A
Screw-on B
C18
See below:
Approvals and Compliances
70° C
70° C
Description
- Panel mount :
Screw-on or snap-in mounting from front side
- 3 Functions :
Appliance Inlet protection class I or II , Circuit breaker type TA35 2-pole
, Line filter in standard and medical version
- Quick connect terminals 6.3 x 0.8 mm
Unique Selling Proposition
- IP67 protection
- Recessed rocker switch
- Various mounting options
- V-Lock cord retaining
Characteristics
- All single elements are already wired
- Circuit Breaker non-illuminated or illuminated
- Suitable for use in equipment according to IEC/UL 60950
Suitable for use in medical equipment according to IEC/UL 60601-1
Other versions on request
- Other rocker marking
- Medical version M80
- Capacitance CX1
- Variants in white
- Filter version with high inductance
References
Alternative: version without line filter DG11
Weblinks
pdf data sheet, html data sheet, General Product Information,
Distributor-Stock-Check, Accessories, Detailed request for product,
Landing Page
Technical Data
Ratings IEC
Ratings UL/CSA
Leakage Current
Dielectric Strength
Allowable Operation Temperature
Climatic Category
IP-Protection
Protection Class
Terminal
Panel Thickness S
Material: Housing
1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz
standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
-25 °C to 60 °C
25/060/21 acc. to IEC 60068-1
from front side IP 40 or IP 65 / IP 67
acc. to IEC 60529
Suitable for appliances with protection
class I or II acc. to IEC 61140
Quick connect terminals 6.3 x 0.8 mm
Screw: max 8 mm
Mounting screw torque max 0.5 Nm
: S =1.0/1.2/1.5/2.0/2.5/3.0 mm
Thermoplastic, black, UL 94V-0
appliance inlet/-outlet
Circuit Breakers
Line Filter
MTBF
C14 C18 acc. to IEC 60320-1
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class I or II
Acc. IEC/EN 60934, UL 1077, CSA
22.2 no. 235
2-pole rocker switch, illuminated or nonilluminated. Optional with undervoltageor remote trip release
Short circuit capacity Icn:
2000 A
Standard and Medical Version, IEC
60939, UL 60939-3, CSA C22.2 no. 8
Technical Details
> 100'000 h acc. to MIL-HB-217 F
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
EMC Products
1
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: DG12
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40049092
UL Approvals
UL
UL File Number: E495089
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60939
Passive filters for suppressing electromagnetic interference
Designed according to
IEC 61058-1
Switches for appliances. Part 1. General requirements
Designed according to
UL 498
Standard for Attachment Plugs and Receptacles
Designed according to
UL 60939-3
Electromagnetic interference filters
Designed according to
CSA C22.2 no. 42
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to
CSA C22.2 no. 8
Electromagnetic interference (EMI) filters
Design
Standard
Description
Designed for applications acc.
IEC/UL 60950
IEC 60950-1 includes the basic requirements for the safety of information
technology equipment.
Designed for applications acc.
IEC 60601-1
Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS
SCHURTER AG
EU Directive RoHS 2011/65/EU
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
SCHURTER AG
Suitable for use in medical equipment according to IEC/UL 60601-1
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
Medical Equipment
2
EMC Products
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Dimensions [mm]
Snap-in version
(81.6)
35
5.35
30
5.65
±0.10
28.3
59
63
+0.20
0
16
48.3
ma
x. R
R1.5
S
3
+0.10
0
78.3
3.3
Screw-on A
(81.6)
.5
R1
5.35
5.65
48.3
66 ±0.10
59
35
1.2
78.3
ø 3.4 / M3
m
ø 3.4
ax
.R
3
ø 6.2
28.3
76
66
+0.20
0
16
30±0.10
3.3
Screw-on B
(81.6)
5.65
38
±0.10
59
28.3
63
ø 6.2
16
5.35
+0.20
0
48.3
ø 3.4 / M3
38
3
30 ±0.10
.R
ax
1.5
78.3
m
1.2
R
48
3.3
EMC Products
3
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Screw-on with IP 67
+0.20
0
38 ±0.10
ø 3.4
16
34.3 ±0.10
28.3
68
38
5.65
59
5.35
50.3
ø 3.4 / M3
(81.6)
51
1.7
78.3
3
.R
ax
m
42 ±0.10
42
3.3
Technical Data of Filter-Components
Rated Current
[A]
Filter-Type
Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
1
Standard Version
2 x 12
220
2.2
1
2
Standard Version
2 x 5.2
220
2.2
1
3
Standard Version
2x4
220
2.2
1
4
Standard Version
2x2
220
2.2
1
6
Standard Version
2 x 0.8
220
2.2
1
8
Standard Version
2 x 0.6
220
2.2
1
10
Standard Version
2 x 0.4
220
2.2
1
15
Standard Version
2 x 0.1
220
2.2
1
10
Medical Version (M5)
2 x 0.4
220
-
1
Diagrams
Medical version M5, protection class I
L’
L
P1
PE
Cy
Cx
L2
Cy
N
TA 35
L1
1)
PE’
N’
2)
P2
N
1) Line, 2) Load
Medical version M5, protection class II
L’
P1
Cx
N
TA 35
L1
1)
R
L2
N’
P2
1) Line
2) Load
4
EMC Products
2)
P1
L1
1)
PE
1) Line, 2) Load
L
L’
L
Cx
TA 35
Standard Version, medical Version M80
PE’
R
L2
N’
P2
2)
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Attenuation Loss
- - - - 50Ω differential mode _____ 50Ω common mode
Standard version
1A
2A
3A
4A
6A
8A
10 A
15 A
1A
2A
3A
4A
6A
8A
10 A
15 A
Medical version (M5)
Effect of ambient temperature
Ambient Temperature [°C]
Correction factor
-30
0.76
-20
0.81
0
0.90
+23
1.00
+40
1.03
+50
1.04
+60
1.06
EMC Products
5
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Time-Current-Curves
Tripping Characteristics In ≥ 3 ... ≤ 15 A
Tripping Characteristics In < 3 A
[ min ] [ sec ]
10'000
60
30
20
10
[ min ] [ sec ]
10'000
Typ
p
TA35
3–15A (TC-1, TC-2)
+23 °C
5
200
1
Typ
Nennstrom
Umgebungstemp.
60
EMC Products
2
3
4
5
8
10
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Configuration Code
Type
Configuration Code TA35
DG12 - CBDWM10 0C0-0 0 0-C6135 - X X X - X X X X - 0 0
Customer specific type
Color
0
1
Black
White
3)
Panel Mounting
00
Screw version A front mounting
01
Screw version B front mounting
10
Snap-in 1.0 mm
12
Snap-in 1.2 mm
15
Snap-in 1.5 mm
20
Snap-in 2.0 mm
25
Snap-in 2.5 mm
30
Snap-in 3.0 mm
88
Screw version front mounting
(sealed towards housing, IP67)
1)
Terminal PE
0
Without (PCII)
1
QC 6.3x0.8 mm
Type of mains filter (inductance)
0
standard inductance
1
higher inductance
Type of mains filter (capacitor)
1
standard
X2=100nF, Y2=2200pF
2
standard
X2=220nF, Y2=2200pF
3
standard
X1=47nF, Y1=2200pF
4
medical M5
X2=100nF
5
medical M5
X2=220nF
6
medical M5
X1=47nF
7
medical M80
X2=100nF, Y2=470pF
8
medical M80
X2=220nF, Y2=470pF
9
medical M80
X1=47nF, Y1=470pF
Type of mains filter (rated current)
1
1A
2
2A
3
3A
4
4A
5
6A
6
8A
7
10A
8
15A (UL), 10A (IEC), 10A (GB)
2)
Configuration Code TA35
See configuration code of TA35 rocker 2pole
2)
1)
Screw version A
2)
3)
Screw version B
The rated current of the line-filter must not be
exceeded in the end application.
Only on request (approvals pending)
EMC Products
7
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
ORDER CODE
Table 1 Selection for type TA35
Switch
Switch
1
2
LINE
LINE
LOAD
LOAD
CBT
without
illumination
illuminated
Order example
2-pole
Number of switched poles
Number of protected poles
C32
C34
Colours
W
B
3
4
6
Rocker
black
black
black
black
black
non-illuminated
illuminated
white
black
–
–
–
–
–
red transparent
green transparent
orange transparent
Other colours on request
Rocker legend
0
K
printed
L
printed
l
M printed
OFF OFF
printed
white
0
l
H
Colour of print
white
0
embossed
l
F
ON
Illustration
ON
Surface
black
black
Other legends on request
Position of the rocker
legend e.g. I / O
Rated current In (A)
In
Code
In
Code
1,0
2,0
4,0
5,0
6,0
J10
J20
040
050
060
8,0
10,0
12,0
15,0
080
100
120*
150*
Other rated currents on request
8
W
F
120
C0
No other
features
Other versions on request
Switch front
CBD
CBD
C12
C14
240 V
120 V
TA35-
EMC Products
*) UL / CSA only
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Variants
Circuit Breaker
Filter
Connector
Rated Current [A]
Rocker colour
Illumination
TA35 Code
Rated Current [A]
Filter Type
Protection
Class
Color
Mounting
IP-Protection
Order Number
1
black
non-illuminated
CBDBLJ10C0
1
Standard
Version
I
black
Screw-on A
IP 40
3-108-854
10
white
non-illuminated
CBDWM100C0
10
Standard
Version
I
black
Screw-on A
IP 40
3-109-572
10
white
non-illuminated
CBDWM100C0
10
Standard
Version
I
black
Snap-in 1.5
IP 40
3-109-575
10
white
non-illuminated
CBDWM100C0
10
Standard
Version
I
black
Screw B
IP 40
3-109-698
10
white
non-illuminated
CBDWM100C0
10
Standard
Version
I
black
Screw
IP 67
3-118-974
15
white
non-illuminated
CBDWM150C0
15
Standard
Version
I
black
Screw-on A
IP 40
3-109-573
2
white
non-illuminated
CBDWMJ20C0
2
Standard
Version
I
black
Screw-on A
IP 40
3-109-557
3
white
non-illuminated
CBDWM030C0
3
Standard
Version
I
black
Screw-on A
IP 40
3-109-558
4
black
non-illuminated
CBDBF040C0
4
Standard
Version
I
black
Screw-on A
IP 40
3-109-559
6
white
non-illuminated
CBDWM060C0
6
Standard
Version
I
black
Screw-on A
IP 40
3-109-560
8
white
non-illuminated
CBDWM080C0
8
Standard
Version
I
black
Screw-on A
IP 40
3-109-561
10
white
non-illuminated
CBDWM100C0
10
Medical
Version
(M5)
I
black
Screw-on A
IP 40
3-108-465
10
white
non-illuminated
CBDWM100C0
10
Medical
Version
(M5)
I
black
Screw B
IP 40
3-118-982
█
█
█
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit
10 Pcs
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I
4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for
appliances with protection class I
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
Appliance Outlet further types to DG12
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4300-06
4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15
4781
4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15
4784
Connector further types to DG12
...
EMC Products
9
DG12
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Mating Outlets/Connectors shuttered
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black
VAC13KS
Power Cord further types to DG12
30.01.2019
10
EMC Products
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
