3-110-066

UAI 1206 Fuses https://www.schurter.com /PG01_2 Pulse proof SMD fuse, 1206, 32 VDC, max. ambient temperature of 140 °C UL 248-14 · 32 VDC · Time-Lag T Description - Chipfuse for highest demandsregarding pulse resistant, temperature resistant and mechanical strength - Impermeable to potting compound Unique Selling Proposition - AEC-Q200 qualified - Pulse and temperature resistant - Mechanical Shock proved with 1'500 g See below: Approvals and Compliances Applications - Automotive - DC Secondary Protection - Circuits with inrush - LCD Backlight DC-AC Inverter References Packaging Details Weblinks pdf data sheet, html data sheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product, Landing Page Technical Data Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Material: Housing Material: Terminals Unit Weight Storage Conditions Storage Capability Product Marking   32 VDC 5.3 - 7.5 A 100 A Time-Lag T PCB,SMT -40 °C to 140 °C Fiber-reinforced plastic, UL 94V-0 Copper, Ni/Au-plated 0.01 g 0 °C to 40 °C, max. 70% r.h. max. 3 years␣@  25 °C in original packaging Rated current Soldering Methods Solderability Resistance to Soldering Heat Moisture Sensitivity Level Case Resistance Flammability Damp heat, steady state Immersion Thermal Shock Operational Life Vibration, High Frequency Mechanical Shock Resistance to Solvents Temperature Cycling Flame Retardance Board Flex Terminal Strength Reflow Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 250 ±5 °C / 30 ±5 sec acc. to JEDEC J-STD-020 MSL 1, J-STD-020  acc. to EIA/IS-722, Test 4.7 >100 MΩ (between leeds and body) UL 94V-0 (acc. to EIA/IS-722, Test 4.12) MIL-STD-202, Method 103   (1000h / 85°C / 85% humidity) MIL-STD-202, Method 104 Condition B  MIL-STD-202, Method 107 (300 air-to-air cycles: -40 to +140°C) MIL-STD-202, Method 108 Condition D 1000h @ 0.63 x In @ 125°C MIL-STD-202, Method 204 Condition D MIL-STD-202, Method 213 Condition F MIL-STD-202, Method 215 (acc to. EIA/IS-722, Test 4.11) JESD22 Method JA-104  AEC-Q200-001  AEC-Q200-005  AEC-Q200-006 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in   Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Circuit Protection 1 UAI 1206 Fuses https://www.schurter.com /PG01_2 Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Details Initiator Description RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Automotive SCHURTER AG AEC-Q200 is a test standard for passive components used in automotive applications. SCHURTER tests components according to the customer's agreement and is certified according to IATF 16949. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification AEC Q200 Dimension [mm]  3.2 mm   1.6 1.1 2 3.2 Reflow soldering pads 1.5 2.2 5.3 Derating Curves 140 130 Percentage of Rating [%] 120 110 100 90 80 70 60 50 40 -40 -20 0 20 23 40 60 80 100 120 140 Ambient Temperature [°C] Pre-Arcing Time Rated Current In 1.0 x In min. 1.25 x In min. 3.0 x In max. 10.0 x In min. 10.0 x In max. Test @ 130°C min. 5.3 A 4h 1h 1s 1 ms 10 ms 15 ms / 20 A 7.5 A 4h 1h 1s 1 ms 10 ms 25 ms / 25 A 2 Circuit Protection 1.1 UAI 1206 Fuses https://www.schurter.com /PG01_2 Time-Current-Curves 1000000 100000 5.3 A 7.5 A 10000 Time in Seconds 1000 100 10 1 0.1 0.01 0.001 1 10 100 Current in Amperes All Variants Rated Current [A] Rated Voltage [VDC] Marking Breaking Capacity Voltage Drop 1.0 In typ. [mV] Cold Resistance typ. [mΩ] Melting I²t 10.0 In typ. [A²s] Order Number 5.3 32 5.3 1) 55 8.45 5.6 3-110-065 █ 7.5 32 7.5 1) 55 6.1 11.5 3-110-066 █ 1) 100 A @ 32 VDC █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Blister Tape 18 cm Reel (1000 pcs.) 20.02.2019 Packaging Unit   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Circuit Protection 3