3-118-974

DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Circuit Breaker TA35 (recessed) Screw-on with IP67 C14 Screw-on A Screw-on B C18 See below: Approvals and Compliances 70° C 70° C Description - Panel mount : Screw-on or snap-in mounting from front side - 3 Functions : Appliance Inlet protection class I or II , Circuit breaker type TA35 2-pole , Line filter in standard and medical version - Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - IP67 protection - Recessed rocker switch - Various mounting options - V-Lock cord retaining Characteristics - All single elements are already wired - Circuit Breaker non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Other rocker marking - Medical version M80 - Capacitance CX1 - Variants in white - Filter version with high inductance References Alternative: version without line filter   DG11  Weblinks pdf data sheet, html data sheet, General Product Information, Distributor-Stock-Check, Accessories, Detailed request for product, Landing Page Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material: Housing   1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 60 °C 25/060/21 acc. to IEC 60068-1 from front side IP40 or IP65 / IP67 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm : S =1.0/1.2/1.5/2.0/2.5/3.0 mm Thermoplastic, black, UL 94V-0 appliance inlet/-outlet Circuit Breakers Line Filter MTBF C14 C18 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Acc. IEC/EN 60934, UL 1077, CSA 22.2 no. 235 2-pole rocker switch, illuminated or nonilluminated. Optional with undervoltageor remote trip release Short circuit capacity Icn: 2000 A Standard and Medical Version, IEC 60939, UL 60939-3, CSA C22.2 no. 8 Technical Details > 100'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. EMC Products 1 DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DG12 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40049092 UL Approvals UL UL File Number: E495089 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 60939-3 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Medical Equipment 2 EMC Products DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimensions [mm] Snap-in version (81.6) 35 5.35 30 5.65 ±0.10 28.3 59 63 +0.20 0 16 48.3 ma x. R R1.5 S 3 +0.10 0 78.3 3.3 Screw-on A (81.6) .5 R1 5.35 5.65 48.3 66 ±0.10 59 35 1.2 78.3 ø 3.4 / M3 m ø 3.4 ax .R 3 ø 6.2 28.3 76 66 +0.20 0 16 30±0.10 3.3 Screw-on B (81.6) 5.65 38 ±0.10 59 28.3 63 ø 6.2 16 5.35 +0.20 0 48.3 ø 3.4 / M3 38 3 30 ±0.10 .R ax 1.5 78.3 m 1.2 R 48 3.3 EMC Products 3 DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Screw-on with IP67 +0.20 0 38 ±0.10 ø 3.4 16 34.3 ±0.10 28.3 68 38 5.65 59 5.35 50.3 ø 3.4 / M3 (81.6) 51 1.7 78.3 3 .R ax m 42 ±0.10 42 3.3 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard Version 2 x 12 220 2.2 1 2 Standard Version 2 x 5.2 220 2.2 1 3 Standard Version 2x4 220 2.2 1 4 Standard Version 2x2 220 2.2 1 6 Standard Version 2 x 0.8 220 2.2 1 8 Standard Version 2 x 0.6 220 2.2 1 10 Standard Version 2 x 0.4 220 2.2 1 15 Standard Version 2 x 0.1 220 2.2 1 10 Medical Version (M5) 2 x 0.4 220 - 1 Diagrams Medical version M5, protection class I L’ L P1 PE Cy Cx L2 Cy N TA 35 L1 1) PE’ N’ 2) P2 N 1) Line, 2) Load Medical version M5, protection class II L’ P1 Cx N TA 35 L1 1) R L2 N’ P2 1) Line 2) Load 4 EMC Products 2) P1 L1 1) PE 1) Line, 2) Load L L’ L Cx TA 35 Standard Version, medical Version M80 PE’ R L2 N’ P2 2) DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1A 2A 3A 4A 6A 8A 10 A 15 A 1A 2A 3A 4A 6A 8A 10 A 15 A Medical version (M5) Effect of ambient temperature Ambient Temperature [°C] Correction factor -30 0.76 -20 0.81 0 0.90 +23 1.00 +40 1.03 +50 1.04 +60 1.06 EMC Products 5 DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Time-Current-Curves Tripping Characteristics In ≥ 3 ... ≤ 15 A Tripping Characteristics In < 3 A [ min ] [ sec ] 10'000 60 30 20 10 [ min ] [ sec ] 10'000 Typ p TA35 3–15A (TC-1, TC-2) +23 °C 5 200 1 Typ Nennstrom Umgebungstemp. 60 EMC Products 2 3 4 5 8 10 DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Configuration Code Type Configuration Code TA35 DG12 - CBDWM10 0C0-0 0 0-C6135 - X X X - X X X X - 0 0 Customer specific type Color 0 1 Black White 3) Panel Mounting 00 Screw version A front mounting 01 Screw version B front mounting 10 Snap-in 1.0 mm 12 Snap-in 1.2 mm 15 Snap-in 1.5 mm 20 Snap-in 2.0 mm 25 Snap-in 2.5 mm 30 Snap-in 3.0 mm 88 Screw version front mounting (sealed towards housing, IP67) 1) Terminal PE 0 Without (PCII) 1 QC 6.3x0.8 mm Type of mains filter (inductance) 0 standard inductance 1 higher inductance Type of mains filter (capacitor) 1 standard X2=100nF, Y2=2200pF 2 standard X2=220nF, Y2=2200pF 3 standard X1=47nF, Y1=2200pF 4 medical M5 X2=100nF 5 medical M5 X2=220nF 6 medical M5 X1=47nF 7 medical M80 X2=100nF, Y2=470pF 8 medical M80 X2=220nF, Y2=470pF 9 medical M80 X1=47nF, Y1=470pF Type of mains filter (rated current) 1 1A 2 2A 3 3A 4 4A 5 6A 6 8A 7 10A 8 15A (UL), 10A (IEC), 10A (GB) 2) Configuration Code TA35 See configuration code of TA35 rocker 2pole 2) 1) Screw version A 2) 3) Screw version B The rated current of the line-filter must not be exceeded in the end application. Only on request (approvals pending) EMC Products 7 DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 ORDER CODE Table 1 Selection for type TA35 Switch Switch 1 2 LINE LINE LOAD LOAD CBT without illumination illuminated Order example 2-pole Number of switched poles Number of protected poles C32 C34 Colours W B 3 4 6 Rocker black black black black black non-illuminated illuminated white black – – – – – red transparent green transparent orange transparent Other colours on request Rocker legend 0 K printed L printed l M printed OFF OFF printed white 0 l H Colour of print white 0 embossed l F ON Illustration ON Surface black black Other legends on request Position of the rocker legend e.g. I / O Rated current In (A) In Code In Code 1,0 2,0 4,0 5,0 6,0 J10 J20 040 050 060 8,0 10,0 12,0 15,0 080 100 120* 150* Other rated currents on request 8 W F 120 C0 No other features Other versions on request Switch front CBD CBD C12 C14 240 V 120 V TA35- EMC Products *) UL / CSA only DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Variants Circuit Breaker Filter Connector Rated Current [A] Rocker colour Illumination TA35 Code Rated Current [A] Filter Type Protection Class Color Mounting IP-Protection Order Number 1 black non-illuminated CBDBLJ10C0 1 Standard Version I black Screw-on A IP40 3-108-854 10 white non-illuminated CBDWM100C0 10 Standard Version I black Screw-on A IP40 3-109-572 10 white non-illuminated CBDWM100C0 10 Standard Version I black Snap-in 1.5 IP40 3-109-575 10 white non-illuminated CBDWM100C0 10 Standard Version I black Screw B IP40 3-109-698 10 white non-illuminated CBDWM100C0 10 Standard Version I black Screw IP67 3-118-974 15 white non-illuminated CBDWM150C0 15 Standard Version I black Screw-on A IP40 3-109-573 2 white non-illuminated CBDWMJ20C0 2 Standard Version I black Screw-on A IP40 3-109-557 3 white non-illuminated CBDWM030C0 3 Standard Version I black Screw-on A IP40 3-109-558 4 black non-illuminated CBDBF040C0 4 Standard Version I black Screw-on A IP40 3-109-559 6 white non-illuminated CBDWM060C0 6 Standard Version I black Screw-on A IP40 3-109-560 8 white non-illuminated CBDWM080C0 8 Standard Version I black Screw-on A IP40 3-109-561 10 white non-illuminated CBDWM100C0 10 Medical Version (M5) I black Screw-on A IP40 3-108-465 10 white non-illuminated CBDWM100C0 10 Medical Version (M5) I black Screw B IP40 3-118-982 █ █ █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit   10 Pcs  Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DG12   Connector Overview complete   4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784 Connector further types to DG12 ... EMC Products 9 DG12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS Power Cord further types to DG12 16.04.2019   10 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.