3-124-295

C20F Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C20 with Filter, Front or Rear Side Mounting Screw-on mounting from front side Snap-in mounting from front side C20 See below: Approvals and Compliances 70° C Description - Panel mount : Screw-on version from front or rear side, snap-in version from front side - 2 Functions : Appliance Inlet Protection class I , Line filter in standard and medical version - Solder, quick connect or wires (stranded) Unique Selling Proposition - Attractive flat front design - Highly resistant since fully potted - Interrupts ground loops - V-Lock cord retaining Characteristics - Compact design with optimal shielding Suitable for assembly in metal plated plastic housings - Version with class X1 and X2 (standard version) capacitors - Universal line filter for standard applications - Suitable for use in equipment according to IEC/UL 62368-1 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - 16A according to UL - Capacity CX 330 nF References Alternative: version without line filter   4793;  4798  Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Landing Page Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Impulse Withstand Voltage Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material: Housing   16 A @ Ta 40 °C / 250 VAC; 50 Hz 20 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) > 2.5 kV between L-N (CX2) > 4 kV between L-N (CX1) > 5 kV between L/N-PE (Cy2) voltage (1.2/50 μs) -25 °C to 85 °C appliance inlet/-outlet Line Filter MTBF C20 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 3'000'000 h acc. to MIL-HB-217 F 25/085/21 acc. to IEC 60068-1 from front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder, quick connect or wires (stranded) Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1 mm to 3 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances EMC Products 1 C20F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: C20F Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 104884 UL Approvals UL UL File Number: E72928 CQC Approvals CQC CQC Certificate Number: CQC18001191999 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Designed for applications acc. IEC/UL 62368 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Landing Page V-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Technology SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 EMC Products C20F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] Screw-on from front side 10.7 R6 6.3 x 0.8 * 3.5/M3 64.65 30 42 ±0.15 34.8 +0.20 0 ø 6.3x95° 33.90 x 25.90 53 42 3.5 9.4 R3 3.85 26.8 +0.20 0 79.2 * Solder terminal: identical outer dimensions Screw-on mounting from rear side with metal flange 10.7 R6 6.3 x 0.8 * 3 3.5 max. R 0.5 M3 28 64.65 30 79.2 42 ±0.15 33.90 x 25.90 53 36 42 R 0.5 36.4 +0.20 0 9.4 3.85 28.3 +0.20 0 Snap-in mounting from front side 10.7 33.90 x 25.85 38 30 34.8 +0.20 0 9.4 R2 64.65 R3 3.85 26.3 +0.20 0 79.2 EMC Products 3 C20F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Screw-on mounting from front side with flexible wire 7 ±2 150 +10 0 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductance L1/ L2 [mH] Inductance L3 [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 16 Standard version 2 x 0.3 - 100 2.2 1 16 Standard Version with Ground Line Choke 2 x 0.3 0.15 330 2.2 1 16 Medical Version (M5) 2 x 0.3 - 100 - 1 16 Medical Version (M80) 2 x 0.3 - 100 0.47 1 16 Medical Version (M5) with Ground Line Choke 2 x 0.3 0.15 330 - 1 Diagrams Standard version Medical Version (M5) L L’ L L’ L1 1) PE Cx L1 Cy R L2 N PE’ 2) Cy 1) PE N’ Cx PE’ 2) R L2 N N’ 1) Line 2) Load 1) Line 2) Load Standard version with ground line choke Medical Version (M5) with ground line choke L L’ L1 1) PE N Cx Cy R L2 L3 1) Line 2) Load 4 Cy 2) PE’ N’ L 1) PE N 1) Line 2) Load EMC Products L’ L1 Cx 2) PE’ R L2 N’ L3 C20F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 20 A Medical version (M5) 20 A Standard with Earth Line Choke 20A Medical (M5) with Earth Line Choke 20A All Variants Rated Current IEC Rated Current Filter-Type UL Panel mounting Mounting side Terminal Capacitor V-Lock Order Number 16 20 Standard version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C20F.0111 16 20 Standard version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF C20F.0113 16 20 Standard version Snap-in Front Side Solder terminals X2 100nF C20F.0011 16 20 Standard version Snap-in Front Side Solder terminals X1 100nF C20F.0013 16 20 Standard version Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF l C20F.0101 16 20 Standard version Screw Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF l C20F.0103 16 20 Standard version Screw Front Side Solder terminals X2 100nF l C20F.0001 16 20 Standard version Screw Front Side Solder terminals X1 100nF l C20F.0003 16 20 Standard version Screw Rear Side Flexible wire AWG14 X2 100nF EMC Products C20F.0221 5 █ █ █ C20F Rated Current IEC Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current Filter-Type UL Panel mounting Mounting side Terminal Capacitor V-Lock Order Number 16 20 Standard version Screw Rear Side Flexible wire AWG14 X1 100nF C20F.0023 16 20 Standard version Screw Rear Side Flexible wire AWG14 X1 100nF C20F.0223 16 20 Standard version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C20F.0121 16 20 Standard version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X1 100nF C20F.0123 16 20 Standard version Screw Rear Side Solder terminals X2 100nF C20F.0021 16 20 Standard Version with Ground Line Choke Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X2 330nF l 3-124-295 16 20 Standard Version with Ground Line Choke Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 330nF l 3-124-273 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C20F.0112 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF C20F.0114 16 20 Medical Version (M5) Snap-in Front Side Solder terminals X2 100nF C20F.0012 16 20 Medical Version (M5) Snap-in Front Side Solder terminals X1 100nF 16 20 Medical Version (M5) Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF l C20F.0102 16 20 Medical Version (M5) Screw Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF l C20F.0104 16 20 Medical Version (M5) Screw Front Side Solder terminals X2 100nF l C20F.0002 20 Medical Version (M5) Screw Front Side Solder terminals X1 100nF l C20F.0004 16 20 Medical Version (M5) Screw Rear Side Flexible wire AWG14 X2 100nF 16 20 Medical Version (M5) Screw Rear Side Flexible wire AWG14 X2 100nF C20F.0222 20 Medical Version (M5) Screw Rear Side Flexible wire AWG14 X1 100nF C20F.0024 16 20 Medical Version (M5) Screw Rear Side Flexible wire AWG14 X1 100nF C20F.0224 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C20F.0122 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm X1 100nF C20F.0124 16 20 Medical Version (M5) with Ground Line Choke Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 330nF Wire length: 150 mm Packaging unit  6 20 Pcs  EMC Products █ C20F.0022 16 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER █ C20F.0014 16 █ Most Popular. █ l 3-124-294 █ C20F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Accessories Description Wire Harness Wire harness for SCHURTER products   Assorted Covers Rear Cover   0859.0047   Cord retaining kits Cord retaining strain relief   Countersunk, K 4700.0010 Flat head, L 4700.0011   Mating Outlets/Connectors Category / Description Connector Overview complete 4795, Mounting: Power Cord, Cable Connector: IEC C19 4795 4790, Mounting: Power Cord, Screw Connector: IEC C19 4790 0104U, Mounting: Power Supply Cord, Screw clamps Connector: IEC C19 0104U Connector further types to C20F   Mating Outlets/Connectors shuttered Power Cord Overview complete VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black VAC19KS Power Cord further types to C20F 10.03.2020   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. EMC Products 7