31.9157

FUS Fuseholder https://www.schurter.com /PG02 Shock-Safe Fuseholder, 5 x 20 / 6.3 x 32 mm, Slotted Cap / Fingergrip, Snap-in stepless Shock-Safe Fuseholder Socket with Fingergrip Cap Shock-Safe Fuseholder Socket with Slotted Cap 500 VAC · 4 W / 16 A (VDE) · 600 VAC/VDC · 32 A (UL/CSA) Description - Fuseholder for 600 VAC applications - Fuseholder with high rated power acceptance - Screw type fuse carrier Unique Selling Proposition - Fuseholder for high performance applications - High protection class IP67 - Easy, stepless snap-in mounting See below: Approvals and Compliances Applications - Equipment with three-phase supply (400 VAC) - Applications with rated current up to 16 A (VDE) Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Microsite Technical Data   Shock-Safe Category Fuse-Link Mounting Attachment Terminal Rated Voltage Rated current Rated Power Acceptance IEC Soldering Methods PC2 5 x 20 / 6.3 x 32 mm Panel mount, Front Side Snap-in Solder / Quick-Connect 6.3 x 0.8 mm 500 VAC (VDE), 600 VAC/VDC (UL/CSA) 16 A (VDE), 32 A (UL/CSA) 4 W / 16 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP67  Protection Class Suitable for appliances with protection class I or II acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Unit Weight 36.1 g / 39.4 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Rated Voltage, Power Rating, Rated current, Certification marks Solderability Resistance to Soldering Heat Solderability Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Panel Thickness Iron Soldering Profile 350 °C / 3 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20 350 °C / 3 sec acc. to IEC 60068-2-20, Test Ta, method 2 ≤  10 mΩ at 100 mA acc. to IEC 60127-6 > 3 kV between life parts (50 Hz: 1 min) > 4 kV between life parts ≥ 10 MΩ between life parts (500 VDC: 1 min) III acc. to IEC 60664-1 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc 1.0 - 3.0 mm Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Circuit Protection 1 FUS Fuseholder https://www.schurter.com /PG02 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FUS Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40044384 UL Approvals UL UR File Number: E39328 Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Industrial Control Equipment Designed according to CSA C22.2 no. 4248.1 Industrial Control Equipment Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Dimension [mm]    70.6 mm   4.3 4.3 12.9 2 70.6 8.5 ø28.2 2.2 ø28.2 8.5 1.8 Identification 63.2 Circuit Protection FUS Fuseholder 0 0 18.7-0.1 18.7-0.1 https://www.schurter.com /PG02 0 0 19.3-0.1 19.5-0.1 Plate thickness 1mm Plate thickness 1.5, 2.0, 3.0mm Derating Curves Admissible Power Acceptance in Watt 4.0 3.5 3.0 I = 1.0 In 2.5 2.0 I = 0.7 In 1.5 I =