3101.0071

Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, horizontal, Slot/Fingergrip, SMD, IEC 60335-1 FPG7 Fingergrip 250 VAC · 2.5 W / 10 A (VDE)16 A (UL/CSA) - Surface Mount Device - Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order number: 3101.0071 / 3101.0076 - Cap is available slotted or fingergrip Description Applications - Industrial electronic - Household appliances - Medical equipments General Product Information Packaging Details References Weblinks Standards - IEC 60127-6 - UL 4248-1 / UL 512 - CSA C22.2 no. 39 Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals - VDE License Number: 129098 - UL File Number: E39328 Technical Data Shocksafe Category Fuse-Link Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC PC2 5 x 20 mm PCB Solder SMT 250 VAC 10 A (VDE), 16 A (UL/CSA) 2.5 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 40 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 4.4 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Approvals Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Reflow 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 °C / 20 - 40 sec acc. to IPC/JEDEC J-STD-020D < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 2.5 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - II acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc Fuses  FPG7 www.schurter.com/pg02 Abmessungen 32.1 8 11 ø 11.1 7.85 6 4 5 32.1 8 14.1 1.8 11 ø 11.1 7.85 5 Fuseholders 32 mm 37 ø 12.5 ø 12.5 5.5 ø 1.5 12.7 4.14 1.75 7.6 1.1 5.08 5.5 ø 1.5 12.7 4.14 1.75 7.6 1.1 5.08 Variant 3101.0070 Variant 3101.0075 5.5 3.5 5.5 1.5 17.5 Soldering pads Derating Curves for Fuseholders Admissible power acceptance in Watt 2.5 2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Ambient air temperature Ta °C Variants Holder l l l l Cap Slot Knob Slot Knob Fingergrip Fingergrip Material Thermoplastic Spec. Thermoplastic 2 Thermoplastic Spec. Thermoplastic 2 Reflow Condition acc. to JEDEC J-STD-020C, Tp=260 +0/-5 °C, tp = 20-40 s acc. to JEDEC J-STD-020C, Tp=260 +0/-5 °C, tp = 20-40 s Remark will be replaced by 3101.0071 Approvals pending Will be replaced by 3101.0076 Approvals pending Order Number 3101.0070 3101.0071 3101.0075 3101.0076 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Packaging Unit xxxx.xxxx.D2 Blister Tape 38 cm Reel (250 pcs.) 2 The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments. 14.1