3101.0235.15

Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, Slot/Fingergrip, Snap stepless, 1.0 - 3.0 mm, IEC 60335-1 FPG3 Fingergrip 250 VAC · 2.5 W / 10 A (VDE)16 A (UL/CSA) - Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order numbers: xxxx.xxxx.15 - Panel Thickness 1.0 - 3.0 mm, Snap stepless - Fuseholder available in black, grey and white Description Applications - Industrial electronic - Household appliances - Medical equipments References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Standards - IEC 60127-6 - UL 4248-1 / UL 512 - CSA C22.2 no. 39 Approvals - VDE License Number: 127216 - UL File Number: E39328 Technical Data Shocksafe Category Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC PC2 5 x 20 mm Panel Mount, Front-Side Snap-in Solder or Quick-Connect 4.8 x 0.5 mm 250 VAC 10 A (VDE), 16 A (UL/CSA) 2.5 W / 10 A @ Ta 23 °C 2.5 W / 10 A for xxxx.xxxx.15 versions in horizontal position Degree of Protection IP 40 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 5.3 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Panel Thickness, Approvals Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Iron 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N > 4 kV between L/N-PE (50 Hz; 1 min) > 2.5 kV between L-N > 6 kV between L/N-PE > 10 MΩ between L-N > 100 MΩ between L/N-PE (500 VDC; 1 min) I - II acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc 1.0 - 3.0 mm Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Panel Thickness s Fuses  FPG3 www.schurter.com/pg02 Abmessungen ø 11.1 7.62 Fuseholders 40 mm ø 11.1 4 ø 15 5.5 26.5 40 S 8 6 ø 12.5 1.8 ø 15 10.5 26.5 45 S 8 ø 12.7 Variants 3101.0030, 3101.0230, 3101.0031 and 3101.0331s = Panel thickness (see variants) Variants Fingergrip 3101.0035, 3101.0235, 3101.0036 and 3101.0336s = Panel thickness (see variants) 12.35 -0.15 13 -0.1 0 11.7 -0.15 0 0 13 -0.1 0 Mounting holes Derating Curves for Fuseholders Admissible power acceptance in Watt 2.5 2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Ambient air temperature Ta °C Variants Holder l l l l l l l l l l l l l l Cap Slot Knob Slot Knob Slot Knob Slot Knob Slot Knob Slot Knob Slot Knob Slot Knob Fingergrip Fingergrip Fingergrip Fingergrip Fingergrip Fingergrip Panel Thickness s [mm] 1.0 - 1.8mm 1.0 - 1.8mm 1.0 - 1.8mm 1.0 - 1.8mm 2.0 - 3.0mm 2.0 - 3.0mm 2.0 - 3.0mm 2.0 - 3.0mm 1.0 - 1.8mm 1.0 - 1.8mm 1.0 - 1.8mm 1.0 - 1.8mm 2.0 - 3.0mm 2.0 - 3.0mm Terminal Solder Solder Quick-Connect 4.8 x 0.5 mm Quick-Connect 4.8 x 0.5 mm Solder Solder Quick-Connect 4.8 x 0.5 mm Quick-Connect 4.8 x 0.5 mm Solder Solder Quick-Connect 4.8 x 0.5 mm Quick-Connect 4.8 x 0.5 mm Solder Solder Colour Holder black black black black black black black black black black black black black black Material Thermoplastic Spec. Thermoplastic 1 Thermoplastic Spec. Thermoplastic 1 Thermoplastic Spec. Thermoplastic 1 Thermoplastic Spec. Thermoplastic 1 Thermoplastic Spec. Thermoplastic 1 Thermoplastic Spec. Thermoplastic 1 Thermoplastic Spec. Thermoplastic 1 Order Number 3101.0030 3101.0030.15 3101.0230 3101.0230.15 3101.0031 3101.0031.15 3101.0331 3101.0331.15 3101.0035 3101.0035.15 3101.0235 3101.0235.15 3101.0036 3101.0036.15 2 Fuses ø 12.7 7.62 Fuseholders www.schurter.com/pg02 FPG3 Cap Fingergrip Fingergrip Panel Thickness s [mm] 2.0 - 3.0mm 2.0 - 3.0mm Terminal Quick-Connect 4.8 x 0.5 mm Quick-Connect 4.8 x 0.5 mm Colour Holder black black Material Thermoplastic Spec. Thermoplastic 1 Order Number 3101.0336 3101.0336.15 Holder l l Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. White and grey colours available on request Packaging Unit Bulk 186 x 91 x 91 mm (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments. 3