3403.0119.11

OMT Fuses https://www.schurter.com /PG01_2 Surface Mount Fuse, 11 x 4.6 mm, Time-Lag T, 250 VAC, 125 VDC Exemplary part photo depending on part no. See below: UL 248-14 · 250 VAC · 125 VDC · Time-Lag T Approvals and Compliances Description Applications - Directly solderable on printed circuit boards - Primary protection on SMD PCBs - AC and DC applications References Packaging Details Weblinks pdf datasheet, html-datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product Technical Data   Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking 125 - 250 VAC, 125 VDC  0.75 - 5 A 50 A - 100 A Time-Lag T PCB,SMT -40 °C to 125 °C 40/125/21 acc. to IEC 60068-1 Thermoplastic, UL 94V-0 Tin-Plated Copper Alloy 0.04 g 0 °C to 40 °C, max. 70% r.h. , Type, Rated current, Approvals Soldering Methods Solderability Resistance to Soldering Heat Moisture Resistance Test Terminal Strength Thermal Shock Case Resistance Mechanical Shock Vibration, High Frequency Resistance to Solvents Reflow, Wave Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 °C / 10 sec acc. to IEC 60068-2-58, Test Td MIL-STD-202, Method 106E (50 cycles in a temp./mister chamber) MIL-STD-202, Method 211A (Deflection of board 1 mm for 1 minute) MIL-STD-202, Method 107D (200 air-to-air cycles from -55 to +125°C) acc. to EIA/IS-722, Test 4.7 >100 MΩ (between leeds and body) MIL-STD-202, Method 213B (Shock 50g, half sine wave, 11 ms) MIL-STD-202, Method 204D Shock 20 gn, 20 min, 10-2 kHz, 12 cyc. MIL-STD-202, Method 215A Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in   Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: OMT Approval Logo Certificates Certification Body Description UL Approvals UL UL File Number: E41599 Fuses 1 OMT Fuses https://www.schurter.com /PG01_2 Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm]  11 mm   4.6 7.5 1.1 1.75 4.4 11 0 - 0.05 3.2 0.15 2.2 3.9 5.5 ±0.1 3.6 Soldering pads Pre-Arcing Time Rated Current In 0.75 A - 5 A 2 1.0 x In min. 2.0 x In min. 2.0 x In max. 3.0 x In min. 3.0 x In max. 8.0 x In min. 8.0 x In max. 4h 100 ms 60 s 70 ms 3s 5 ms 50 ms Fuses 6 OMT Fuses https://www.schurter.com /PG01_2 Time-Current-Curves 100000 10000 1000 Time in Seconds 100 10 1 0.1 0.01 0.001 10 1 Multiple of Rated Current In All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 0.75 250 125 VDC 0.75 250 125 VDC 1 250 1 250 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.0 In typ. [mW] Melting I²t 8.0 In typ. [A²s] Order Number 1) 200 150 0.36 l 3403.0129.11 1) 200 180 0.36 l 3403.0129.24 125 VDC 1) 146 146 0.99 l 3403.0116.11 125 VDC 1) 92 92 0.7 l 3403.0116.24 1.25 250 125 VDC 1) 89 111 1 l 3403.0117.11 1.25 250 125 VDC 1) 89 111 1 l 3403.0117.24 1.5 250 125 VDC 2) 74 111 2 l 3403.0130.11 1.5 250 125 VDC 2) 74 111 2 l 3403.0130.24 2 250 125 VDC 2) 69 138 4 l 3403.0119.11 2 250 125 VDC 2) 69 138 4 l 3403.0119.24 2.5 125 125 VDC 3) 68 170 7 l 3403.0120.11 2.5 125 125 VDC 3) 68 170 7 l 3403.0120.24 3 125 125 VDC 3) 62 186 12 l 3403.0131.11 3 125 125 VDC 3) 62 186 12 l 3403.0131.24 3.5 125 125 VDC 3) 60 210 19 l 3403.0132.11 3.5 125 125 VDC 3) 60 210 19 l 3403.0132.24 4 125 125 VDC 3) 60 240 23 l 3403.0122.11 4 125 125 VDC 3) 60 240 23 l 3403.0122.24 5 125 125 VDC 3) 57 285 37 l 3403.0123.11 5 125 125 VDC 3) 57 285 37 l 3403.0123.24 █ █ █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) 100 A @ 250 VAC / 100 A @ 125 VDC 2) 50 A @ 250 VAC / 100 A @ 125 VAC / 100 A @ 125 VDC 3) 100 A @ 125 VAC / 100 A @ 125 VDC Fuses 3 OMT .xx = .11 Plastic Bag (100 pcs.) .xx = .24 Blister Tape 33 cm Reel (2000 pcs.) 26.02.2018 Packaging Unit   Fuses https://www.schurter.com /PG01_2 4 Fuses The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.