3404.0014.11

OMF 125 Fuses https://www.schurter.com /PG01_2 Surface Mount Fuse, 7.4 x 3.1 mm, Quick-Acting F, 125 VAC, 125 VDC Exemplary part photo depending on part no. See below: UL 248-14 · 125 VAC · 125 VDC · Quick-Acting F Approvals and Compliances Description References - Directly solderable on printed circuit boards Packaging Details Corresponding Fuseholder   OMH 125  Assembled Fuseholder   OMK 125  Fuse Kit  Fuse Kit OMF  Weblinks pdf datasheet, html-datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product Technical Data   Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking 125 VAC, 125 VDC 0.063 - 10 A 100 A Quick-Acting F PCB,SMT -40 °C to 125 °C 40/85/21 acc. to IEC 60068-1 Thermoplastic, UL 94V-0 Tin-Plated Copper Alloy 0.08 g 0 °C to 60 °C, max. 70% r.h. , Type, Rated current, Approvals Soldering Methods Solderability Resistance to Soldering Heat Load Humidity Test Moisture Resistance Test Terminal Strength Case Resistance Mechanical Shock Vibration, High Frequency Resistance to Solvents Flammability Reflow, Wave Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 °C / 10 sec acc. to IEC 60068-2-58, Test Td MIL-STD-202, Method 103B 0.1 x In @ 0.85 r.H. @ 85°C MIL-STD-202, Method 106E (50 cycles in a temp./mister chamber) MIL-STD-202, Method 211A (Deflection of board 1 mm for 1 minute) acc. to EIA/IS-722, Test 4.7 >100 MΩ (between leeds and body) MIL-STD-202, Method 213B (Shock 50g, half sine wave, 11 ms) MIL-STD-202, Method 204D Shock 20 gn, 20 min, 10-2 kHz, 12 cyc. MIL-STD-202, Method 215A min. UL 94V-1 (acc. to EIA/IS-722, Test 4.12) Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in   Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: OMF 125 Approval Logo Certificates Certification Body Description UL Approvals UL UL File Number: E41599 Fuses 1 OMF 125 Fuses https://www.schurter.com /PG01_2 Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm]  7.4 mm   2.8 7.4 3.1 5.8 2.6 3 4 1.6 1.6 2 Soldering pads Pre-Arcing Time Rated Current In 1.0 x In min. 2.0 x In max. 4.0 x In max. 0.063 A - 5 A 4h 1s 10 ms 6.3 A - 8 A 4h 5s 50 ms 10 A 4h 20 s 60 ms 2 Fuses 3.5 OMF 125 Fuses https://www.schurter.com /PG01_2 Time-Current-Curves 100000 ≤ 5A 6.3 A – 8A 10000 10 A 1000 Time in Seconds 100 10 1 0.1 0.01 0.001 10 1 Multiple of Rated Current In All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 0.063 125 125 0.063 125 125 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.0 In typ. [mW] Melting I²t 4.0 In typ. [A²s] Order Number 1) 2550 160 0.00011 l 3404.0003.11 1) 2550 160 0.00011 l 3404.0003.22 0.063 125 125 1) 2550 160 0.00011 l 3404.0003.24 0.1 125 125 1) 1770 180 0.00067 l 3404.0004.11 0.1 125 125 1) 1770 180 0.00067 l 3404.0004.22 0.1 125 125 1) 1770 180 0.00067 l 3404.0004.24 0.125 125 125 1) 1770 220 0.0011 l 3404.0049.11 0.125 125 125 1) 1770 220 0.0011 l 3404.0049.22 0.125 125 125 1) 1770 220 0.0011 l 3404.0049.24 0.16 125 125 1) 1700 270 0.0018 l 3404.0005.11 0.16 125 125 1) 1700 270 0.0018 l 3404.0005.22 0.16 125 125 1) 1700 270 0.0018 l 3404.0005.24 0.25 125 125 1) 990 250 0.0058 l 3404.0006.11 0.25 125 125 1) 990 250 0.0058 l 3404.0006.22 0.25 125 125 1) 990 250 0.0058 l 3404.0006.24 0.35 125 125 1) 990 350 0.0076 l 3404.0043.11 0.35 125 125 1) 990 350 0.0076 l 3404.0043.22 0.35 125 125 1) 990 350 0.0076 l 3404.0043.24 0.375 125 125 1) 990 370 0.013 l 3404.0044.11 0.375 125 125 1) 990 370 0.013 l 3404.0044.22 0.375 125 125 1) 990 370 0.013 l 3404.0044.24 0.4 125 125 1) 960 380 0.016 l 3404.0007.11 0.4 125 125 1) 960 380 0.016 l 3404.0007.22 0.4 125 125 1) 960 380 0.016 l 3404.0007.24 0.5 125 125 1) 350 150 0.01 l 3404.0045.11 3404.0045.22 0.5 125 125 1) 350 150 0.01 l 0.5 125 125 1) 350 150 0.01 l 3404.0045.24 0.63 125 125 1) 290 180 0.02 l 3404.0008.11 █ █ █ █ █ Fuses 3 OMF 125 Fuses https://www.schurter.com /PG01_2 Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 0.63 125 125 0.63 125 0.75 125 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Power Dissipation 1.0 In typ. [mW] Melting I²t 4.0 In typ. [A²s] 1) 290 180 0.02 l 125 1) 290 180 0.02 l 3404.0008.24 125 1) 260 200 0.031 l 3404.0046.11 Order Number 3404.0008.22 0.75 125 125 1) 260 200 0.031 l 3404.0046.22 0.75 125 125 1) 260 200 0.031 l 3404.0046.24 1 125 125 1) 220 220 0.078 l 3404.0009.11 █ 1 125 125 1) 220 220 0.078 l 3404.0009.22 █ 1 125 125 1) 220 220 0.078 l 3404.0009.24 1.25 125 125 1) 220 280 0.14 l 3404.0010.11 1.25 125 125 1) 220 280 0.14 l 3404.0010.22 1.25 125 125 1) 220 280 0.14 l 3404.0010.24 1.5 125 125 1) 200 300 0.24 l 3404.0047.11 1.5 125 125 1) 200 300 0.24 l 3404.0047.22 1.5 125 125 1) 200 300 0.24 l 3404.0047.24 1.6 125 125 1) 200 320 0.27 l 3404.0011.11 1.6 125 125 1) 200 320 0.27 l 3404.0011.22 1.6 125 125 1) 200 320 0.27 l 3404.0011.24 2 125 125 1) 200 400 0.44 l 3404.0012.11 2 125 125 1) 200 400 0.44 l 3404.0012.22 2 125 125 1) 200 400 0.44 l 3404.0012.24 2.5 125 125 1) 190 480 0.97 l 3404.0013.11 2.5 125 125 1) 190 480 0.97 l 3404.0013.22 2.5 125 125 1) 190 480 0.97 l 3404.0013.24 3 125 125 1) 190 570 1.3 l 3404.0014.11 3 125 125 1) 190 570 1.3 l 3404.0014.22 3 125 125 1) 190 570 1.3 l 3404.0014.24 3.15 125 125 1) 190 600 1.2 l 3404.0048.11 3.15 125 125 1) 190 600 1.2 l 3404.0048.22 3.15 125 125 1) 190 600 1.2 l 3404.0048.24 3.5 125 125 1) 140 490 1.6 l 3404.0015.11 █ 3.5 125 125 1) 140 490 1.6 l 3404.0015.22 3.5 125 125 1) 140 490 1.6 l 3404.0015.24 4 125 125 1) 182 728 2.25 l 3404.0016.11 █ 4 125 125 1) 182 728 2.25 l 3404.0016.22 █ 4 125 125 1) 182 728 2.25 l 3404.0016.24 5 125 125 1) 140 700 2.9 l 3404.0017.11 █ 5 125 125 1) 140 700 2.9 l 3404.0017.22 █ 5 125 125 1) 140 700 2.9 l 3404.0017.24 6.3 125 125 1) 110 690 14 l 3404.0018.11 6.3 125 125 1) 110 690 14 l 3404.0018.22 6.3 125 125 1) 110 690 14 l 3404.0018.24 7 125 125 1) 105 740 16 l 3404.0019.11 7 125 125 1) 105 740 16 l 3404.0019.22 7 125 125 1) 105 740 16 l 3404.0019.24 8 125 125 1) 100 800 20 l 3404.0020.11 8 125 125 1) 100 800 20 l 3404.0020.22 █ █ 8 125 125 1) 100 800 20 l 3404.0020.24 10 125 125 1) 80 800 54 l 3404.0021.11 █ 10 125 125 1) 80 800 54 l 3404.0021.22 █ 10 125 125 1) 80 800 54 l 3404.0021.24 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) 100 A @ 125 VAC/DC 4 █ Fuses OMF 125 Fuses https://www.schurter.com /PG01_2 .xx = .11 Plastic Bag (100 pcs.) .xx = .22 Blister Tape 18 cm Reel (750 pcs.) .xx = .24 Blister Tape 33 cm Reel (3000 pcs.) 26.02.2018 Packaging Unit   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Fuses 5