3405.0167.24

UMF 250 Fuses https://www.schurter.com /PG01_2 Surface Mount Fuse, 3 x 10.1 mm, Quick-Acting F, 250 VAC, 125 VDC See below: IEC 60127 · 250 VAC · 125 VDC · Quick-Acting F Approvals and Compliances Description - Directly solderable on printed circuit boards - Impermeable to potting compound used to achieve hermetic seal for use in intrinsically safe applications according to ATEx and IECEx requirements. Unique Selling Proposition - High breaking capacity up to 500A - Low melting I²t-values, fast interruption Applications - Primary protection on SMD PCBs - Secondary protection on SMD PCBs - Battery Management System - Medical Equipment - Power supplies - Illumination References Fuse Kit  Fuse Kit UMF 250 / UMK 250  Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Microsite Technical Data   Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking 250 VAC, 125 VDC 0.5 - 15 A 100 A - 500 A Quick-Acting F PCB,SMT -55 °C to 125 °C 55/125/21 acc. to IEC 60068-1 Ceramics Copper alloy, tin-plated 0.23 g 0 °C to 40 °C, max. 70% r.h. , Rated current, Rated Voltage, Characteristic, Breaking Capacity Soldering Methods Solderability Resistance to Soldering Heat Moisture Sensitivity Level Case Resistance Moisture Resistance Test Operational Life Mechanical Shock Resistance to Solvents Reflow, Wave Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 °C / 10 sec acc. to IEC 60068-2-58, Test Td MSL 1, J-STD-020  >100 MΩ (between leeds and body) acc. to EIA/IS-722, Test 4.7 MIL-STD-202, Method 106 (acc. to EIA/IS-722, Test 4.4.3) 1000h @ 0.60 x In @ 70°C (acc. to EIA/IS-722, Test 4.4.1) MIL-STD-202, Method 213 Condition A MIL-STD-202, Method 215 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: UMF 250 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40027880 & 40048753 UL Approvals UL UR File Number: E41599 METI Approvals METI Japan Electrical Safety and Environment technology Laboratories Circuit Protection 1 UMF 250 Fuses https://www.schurter.com /PG01_2 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-4/2 Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surface mount types Designed according to IEC 60127-7/1 Miniature fuses - Part 7: Miniature fuse-links for special applications Designed according to UL 248-14 Low voltage fuses - Part 14: Supplemental fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. Halogen Free SCHURTER AG SCHURTER strives to offer our customers halogen free products. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG Universal Modular Fuse meets the standard IEC 60127-4 Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Dimension [mm]  10.1 mm   1.6 0.4 3.75 Identification 1.43 6.5 10.1 3 Soldering pads 2 Circuit Protection 2 UMF 250 Fuses https://www.schurter.com /PG01_2 Derating Curves 140 130 Percentage of Rating [%] 120 110 100 90 80 70 60 50 40 -60 -40 -20 0 20 23 40 60 80 100 120 140 160 Ambient Temperature [°C] Pre-Arcing Time Rated Current In 1.0 x In min. 1.25 x In min. 2.0 x In max. 10.0 x In min. 10.0 x In max. 0.5 A - 8 A - 60 min 120 s 1 ms 10 ms 10 A - 15 A 4h - 120 s 1 ms 10 ms Time-Current-Curves 10000 500 mA 630 mA 800 mA 1A 1.25 A 1.6 A 2A 2.5 A 3.15 A 4A 5A 6.3 A 8A 10 A 15 A 1000 100 Time in Seconds 10 1 0.1 0.01 0.001 0.0001 0.1 1 10 100 1000 Current in Amperes All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] Breaking Capacity Voltage Drop 1.0 Voltage Drop 1.0 In max. [mV] In typ. [mV] Power Dissipation 1.25 In max [mW] Melting I²t 10.0 In typ. [A²s] 0.5 250 125 1) 600 0.5 250 125 1) 600 0.63 250 125 1) 0.63 250 125 0.8 250 0.8 250 1 250 430 500 0.042 l l l 3405.0163.11 430 500 0.042 l l l 3405.0163.24 500 350 500 0.092 l l l 3405.0164.11 1) 500 350 500 0.092 l l l 3405.0164.24 125 1) 400 300 500 0.21 l l l 3405.0165.11 125 1) 400 300 500 0.21 l l l 3405.0165.24 125 2) 300 250 500 0.4 l l l 3405.0166.11 Circuit Protection Order Number 3 UMF 250 Fuses https://www.schurter.com /PG01_2 Voltage Drop 1.0 Voltage Drop 1.0 In typ. [mV] In max. [mV] Power Dissipation 1.25 In max [mW] Melting I²t 10.0 In typ. [A²s] 250 500 0.4 l l l 3405.0166.24 300 220 1000 1 l l l 3405.0167.11 300 220 1000 1 l l l 3405.0167.24 3) 300 190 1000 2.1 l l l 3405.0168.11 125 3) 300 190 1000 2.1 l l l 3405.0168.24 250 125 3) 300 200 1000 3.26 l l l 3405.0169.11 2 250 125 3) 300 200 1000 3.26 l l l 3405.0169.24 2.5 250 125 3) 300 160 1200 4.8 l l l 3405.0170.11 2.5 250 125 3) 300 160 1200 4.8 l l l 3405.0170.24 3.15 250 125 3) 300 100 1500 5.17 l l l 3405.0171.11 3.15 250 125 3) 300 100 1500 5.17 l l l 3405.0171.24 4 250 125 3) 300 100 2000 9.4 l l l 3405.0172.11 4 250 125 3) 300 100 2000 9.4 l l l 3405.0172.24 5 250 125 3) 300 110 2500 13.57 l l l 3405.0173.11 5 250 125 3) 300 110 2500 13.57 l l l 3405.0173.24 6.3 250 125 3) 300 80 3000 23.85 l l l 3405.0174.11 6.3 250 125 3) 300 80 3000 23.85 l l l 3405.0174.24 8 250 125 3) 220 80 3000 52.58 l l l 3405.0175.11 8 250 125 3) 220 80 3000 52.58 l l l 3405.0175.24 10 250 125 3) 220 150 4000 45.8 l l 3405.0176.11 10 250 125 3) 220 150 4000 45.8 l l 3405.0176.24 15 125 125 4) 150 100 4000 100 l 3405.0178.11 15 125 125 4) 150 100 4000 100 l 3405.0178.24 Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] Breaking Capacity 1 250 125 2) 300 1.25 250 125 3) 1.25 250 125 3) 1.6 250 125 1.6 250 2 Order Number Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) IEC: 100 A @ 250 VAC / 100 A @ 125 VDC, resistiv 1) UL: 200 A @ 250 VAC, p.f. ≥ 0.99 / 200 A @ 125 VDC, resistiv 2) IEC: 100 A @ 250 VAC / 100 A @ 125 VDC, resistiv 2) UL: 200 A @ 250 VAC, p.f. ≥ 0.99 / 200 A @ 125 VDC, resistiv 2) PSE: 100 A @ 250 VAC 3) IEC: 100 A @ 250 VAC / 100 A @ 125 VDC, resistiv 3) UL: 100 A @ 250 VAC, p.f. ≥ 0.99 / 100 A @ 125 VDC, resistiv 3) PSE: 100 A @ 250 VAC 4) UL: 150 A @ 125 VAC, p.f. ≥ 0.99 / 500 A @ 125 VDC, tau < 0.1ms 4) PSE: 100 A @ 250 VAC Packaging Unit   .xx = .11 .xx = .24 100 pcs in ESD-plastic bag 2000 pcs. in tape [W: 24mm and P1: 8mm] on reel [A: 33cm] 04.09.2023 acc. IEC 60286-3 Type 2a 4 Circuit Protection The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.