3410.0029.04

MGA Fuses https://www.schurter.com /PG01_2 Solid State, Thin Film, SMD 1206, Super-Quick-Acting FF, 125 VAC, 125 VDC, 150 °C UL 248-14 · 125 VAC · 125 VDC · Super-Quick-Acting FF See below: Approvals and Compliances Description Applications Unique Selling Proposition References - Max. ambient temperature 150 °C - Impermeable to potting compound used to achieve hermetic seal for use in intrinsically safe applications according to ATEx and IECEx requirements. - Hermetically sealed and robust construction - High breaking capacity up to 300 A - Smallest size - Applications where high reliability and availability is required - Medical Equipment - Offshore - Defense Alternative: Space version   Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product Technical Data   Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking 32 - 125 VAC, 125 VDC 0.2 - 5 A 50 A Super-Quick-Acting FF PCB,SMT -55 °C to 150 °C 55/150/21 acc. to IEC 60068-1 Ceramics Tin-Plated Nickel 0.03 g 0 °C to 60 °C, max. 70% r.h. none Soldering Methods Solderability Resistance to Soldering Heat Moisture Sensitivity Level Flammability Moisture Resistance Test Thermal Shock Operational Life Load Humidity Test Resistance to Solvents Terminal Strength Reflow, Wave Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 +0/-5 °C / 30 sec acc. to IPC/JEDEC J-STD-020D, Level 1 MSL 1, J-STD-020  min. UL 94V-1 (acc. to EIA/IS-722, Test 4.12) MIL-STD-202, Method 106 (50 cycles in a temp./mister chamber) MIL-STD-202, Method 107D (200 air-to-air cycles from -55 to +125°C) MIL-STD-202, Method 108 1000h @ 0.60 x In @ 70°C MIL-STD-202, Method 103 0.1 x In @ 0.85 r.H. @ 85°C MIL-STD-202, Method 215 MIL-STD-202, Method 211A (Deflection of board 1 mm for 1 minute) Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: MGA Approval Logo Certificates Certification Body Description UL Approvals UL UR File Number: E41599 Circuit Protection 1 MGA Fuses https://www.schurter.com /PG01_2 Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 248-14 Low voltage fuses - Part 14: Supplemental fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm]  3.2 mm Reflow soldering pads 0.5 2 1.55   1.55 1.5 3.2 Derating Curves   140 130 120 110 100 90 80 70 60 50 40 -60 2 -40 -20 0 20 23 40 60 80 100 120 140 Circuit Protection 160 1.1 MGA Fuses https://www.schurter.com /PG01_2 Pre-Arcing Time Rated Current In 0.2 A - 5 A 1.0 x In min. 2.5 x In max. 4h 5s Time-Current-Curves 100000 10000 1000 Time in Seconds 100 10 1 0.1 0.01 0.001 10 1 Multiple of Rated Current In All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 0.2 125 125 0.2 125 125 0.2 125 125 Breaking Capacity Order Number Voltage Drop 1.0 In typ. [mV] Cold Resistance typ. [mΩ] Melting I²t 4.0 In typ. [A²s] 1) 258 1020 0.0008 l 3410.0021.01 1) 258 1020 0.0008 l 3410.0021.02 1) 258 1020 0.0008 l 3410.0021.03 0.2 125 125 1) 258 1020 0.0008 l 3410.0021.04 0.25 125 125 1) 250 800 0.0009 l 3410.0022.01 0.25 125 125 1) 250 800 0.0009 l 3410.0022.02 0.25 125 125 1) 250 800 0.0009 l 3410.0022.03 0.25 125 125 1) 250 800 0.0009 l 3410.0022.04 0.375 125 125 1) 165 361 0.0037 l 3410.0025.01 0.375 125 125 1) 165 361 0.0037 l 3410.0025.02 0.375 125 125 1) 165 361 0.0037 l 3410.0025.03 0.375 125 125 1) 165 361 0.0037 l 3410.0025.04 0.5 125 125 1) 150 247 0.0042 l 3410.0027.01 0.5 125 125 1) 150 247 0.0042 l 3410.0027.02 0.5 125 125 1) 150 247 0.0042 l 3410.0027.03 0.5 125 125 1) 150 247 0.0042 l 3410.0027.04 0.75 125 125 1) 100 115 0.01 l 3410.0029.01 0.75 125 125 1) 100 115 0.01 l 3410.0029.02 0.75 125 125 1) 100 115 0.01 l 3410.0029.03 0.75 125 125 1) 100 115 0.01 l 3410.0029.04 1 125 125 1) 124 98.7 0.035 l 3410.0031.01 1 125 125 1) 124 98.7 0.035 l 3410.0031.02 1 125 125 1) 124 98.7 0.035 l 3410.0031.03 █ █ █ █ █ Circuit Protection 3 MGA Fuses https://www.schurter.com /PG01_2 Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] 1 125 125 1.5 125 125 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Cold Resistance typ. [mΩ] Melting I²t 4.0 In typ. [A²s] 1) 124 98.7 0.035 l 3410.0031.04 1) 105 56 0.064 l 3410.0033.01 Order Number 1.5 125 125 1) 105 56 0.064 l 3410.0033.02 1.5 125 125 1) 105 56 0.064 l 3410.0033.03 1.5 125 125 1) 105 56 0.064 l 3410.0033.04 2 125 125 1) 98 39 0.089 l 3410.0035.01 2 125 125 1) 98 39 0.089 l 3410.0035.02 2 125 125 1) 98 39 0.089 l 3410.0035.03 2 125 125 1) 98 39 0.089 l 3410.0035.04 2.5 125 125 1) 90 29.5 0.15 l 3410.0036.01 2.5 125 125 1) 90 29.5 0.15 l 3410.0036.02 2.5 125 125 1) 90 29.5 0.15 l 3410.0036.03 2.5 125 125 1) 90 29.5 0.15 l 3410.0036.04 3 125 125 1) 88 24.1 0.18 l 3410.0037.01 3 125 125 1) 88 24.1 0.18 l 3410.0037.02 3 125 125 1) 88 24.1 0.18 l 3410.0037.03 3 125 125 1) 88 24.1 0.18 l 3410.0037.04 4 63 125 2) 83.5 17 0.23 l 3410.0240.01 4 63 125 2) 83.5 17 0.23 l 3410.0240.02 4 63 125 2) 83.5 17 0.23 l 3410.0240.03 4 63 125 2) 83.5 17 0.23 l 3410.0240.04 5 32 125 3) 90 13.5 0.45 l 3410.0141.01 5 32 125 3) 90 13.5 0.45 l 3410.0141.02 5 32 125 3) 90 13.5 0.45 l 3410.0141.03 5 32 125 3) 90 13.5 0.45 l 3410.0141.04 █ █ █ █ █ Most Popular. Availability for all products can be searched real-time: https://www.schurter.com/en/info-center/support-tools/stock-checkdistributors 1) 50 A @ 125 VAC / 300 A @ 125 VDC 2) 50 A @ 63 VAC / 50 A @ 125 VDC / 300 A @ 32 VDC 3) 50 A @ 32 VAC / 50 A @ 125 VDC / 300 A @ 32 VDC Packaging Unit   .xx = .01 .xx = .02 .xx = .03 .xx = .04 100 pcs. in tape in ESD-plastic bag 750 pcs. in tape [W: 8mm and P1: 4mm] on reel [A: 18cm] 3000 pcs. in tape [W:8mm and P1: 4mm]on reel [A: 33cm] 10000 pcs. in tape [W: 8mm and P1: 4mm] on reel [A: 33cm] 26.03.2024 acc. IEC 60286-3 Type 2a 4 Circuit Protection The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.