3412.0120.24

USF 0603 Fuses https://www.schurter.com /PG01_2 Surface Mount Fuse, 1.6 x 0.8 mm, Super-Quick-Acting FF, 32 VAC, 63 VDC Exemplary part photo depending on part no. UL 248-14 · 63 VAC · 63 VDC · Super-Quick-Acting FF Description See below: Approvals and Compliances Applications - UL characteristic - Low melting I²t-values, fast interruption - Impermeable to potting compound - Secondary Protection DC and AC - Circuits without inrush - Semiconductor protection References Packaging Details Weblinks pdf data sheet, html datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product, Microsite Technical Data   Rated Voltage Rated current Breaking Capacity Characteristic Mounting Admissible Ambient Air Temp. Climatic Category Material: Housing Material: Terminals Unit Weight Storage Conditions Product Marking 63 VAC, 63 VDC 0.5 - 5 A 50 A Super-Quick-Acting FF PCB,SMT -55 °C to 90 °C 55/090/21 acc. to IEC 60068-1 Fiber-reinforced plastic, UL 94V-0 general Ni/Sn, for 1A version Ni/Au 0.0016 g 0 °C to 60 °C, max. 70% r.h. Letter (see variants) Soldering Methods Solderability Resistance to Soldering Heat Moisture Sensitivity Level Case Resistance Flammability Moisture Resistance Test Resistance to Solvents Terminal Strength Reflow Soldering Profile 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 +0/-5 °C / 30 sec acc. to IPC/JEDEC J-STD-020D, Level 1 MSL 1, J-STD-020  acc. to EIA/IS-722, Test 4.7 >100 MΩ (between leeds and body) min. UL 94V-1 (acc. to EIA/IS-722, Test 4.12) MIL-STD-202, Method 106 (50 cycles in a temp./mister chamber) MIL-STD-202, Method 215 MIL-STD-202, Method 211A (Deflection of board 1 mm for 1 minute) Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: USF 0603 Approval Logo Certificates Certification Body Description UL Approvals UL UL File Number: E41599 Circuit Protection 1 USF 0603 Fuses https://www.schurter.com /PG01_2 Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 248-14 Low voltage fuses - Part 14: Additional fuses Designed according to CSA22.2 No. 248.14 Low-Voltage Fuses - Part 14: Supplemental Fuses Design Standard Description Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video, information technology and office equipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. Halogen Free SCHURTER AG SCHURTER strives to offer our customers halogen free products. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm]  1.6 mm   0.8 0.6 1.1 1.6 0.9 0.3 Soldering pads Pre-Arcing Time Rated Current In 0.5 A - 5 A 2 1.0 x In min. 2.0 x In max. 4h 60 s Circuit Protection 0.8 USF 0603 Fuses https://www.schurter.com /PG01_2 Time-Current-Curves 1000 100 10 0.5 A 4.0 A 0.75 A 5.0 A 1.0 A Time in Seconds 1.5 A 2.0 A 1 2.5 A 3.0 A 3.5 A 0.1 0.01 0.001 0.0000 0.1 1 10 100 Current in Amperes All Variants Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] Marking 0.5 32 63 F 0.5 32 63 0.5 32 63 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Cold Resistance typ. [mΩ] Melting I²t 8.0 In typ. [A²s] Order Number 1) 125 225 0.025 l 3412.0113.11 █ F 1) 125 225 0.025 l 3412.0113.22 █ F 1) 125 225 0.025 l 3412.0113.24 0.5 32 63 F 1) 125 225 0.025 l 3412.0113.26 0.75 32 63 G 1) 110 120 0.05 l 3412.0114.11 0.75 32 63 G 1) 110 120 0.05 l 3412.0114.22 0.75 32 63 G 1) 110 120 0.05 l 3412.0114.24 0.75 32 63 G 1) 110 120 0.05 l 3412.0114.26 1 32 63 H 1) 110 95 0.06 l 3412.0115.11 1 32 63 H 1) 110 95 0.06 l 3412.0115.22 1 32 63 H 1) 110 95 0.06 l 3412.0115.24 1 32 63 H 1) 110 95 0.06 l 3412.0115.26 1.5 32 63 K 1) 65 37.5 0.15 l 3412.0117.11 1.5 32 63 K 1) 65 37.5 0.15 l 3412.0117.22 █ 1.5 32 63 K 1) 65 37.5 0.15 l 3412.0117.24 1.5 32 63 K 1) 65 37.5 0.15 l 3412.0117.26 2 32 32 N 2) 65 28 0.2 l 3412.0119.11 █ 2 32 32 N 2) 65 28 0.2 l 3412.0119.22 █ 2 32 32 N 2) 65 28 0.2 l 3412.0119.24 2 32 32 N 2) 65 28 0.2 l 3412.0119.26 2.5 32 32 O 2) 60 21.5 0.29 l 3412.0120.11 2.5 32 32 O 2) 60 21.5 0.29 l 3412.0120.22 █ 2.5 32 32 O 2) 60 21.5 0.29 l 3412.0120.24 2.5 32 32 O 2) 60 21.5 0.29 l 3412.0120.26 3 32 32 P 2) 60 17 0.32 l 3412.0121.11 █ 3 32 32 P 2) 60 17 0.32 l 3412.0121.22 █ 3 32 32 P 2) 60 17 0.32 l 3412.0121.24 3 32 32 P 2) 60 17 0.32 l 3412.0121.26 Circuit Protection 3 USF 0603 Fuses https://www.schurter.com /PG01_2 Rated Current [A] Rated Voltage [VAC] Rated Voltage [VDC] Marking 3.5 32 32 R 3.5 32 32 3.5 32 32 Breaking Capacity Voltage Drop 1.0 In typ. [mV] Cold Resistance typ. [mΩ] Melting I²t 8.0 In typ. [A²s] 2) 50 12.5 0.42 l R 2) 50 12.5 0.42 l 3412.0122.22 R 2) 50 12.5 0.42 l 3412.0122.24 Order Number 3412.0122.11 3.5 32 32 R 2) 50 12.5 0.42 l 3412.0122.26 4 32 32 S 2) 50 11 0.7 l 3412.0123.11 4 32 32 S 2) 50 11 0.7 l 3412.0123.22 4 32 32 S 2) 50 11 0.7 l 3412.0123.24 4 32 32 S 2) 50 11 0.7 l 3412.0123.26 5 32 32 T 2) 50 9 1.15 l 3412.0124.11 █ 5 32 32 T 2) 50 9 1.15 l 3412.0124.22 █ 5 32 32 T 2) 50 9 1.15 l 3412.0124.24 5 32 32 T 2) 50 9 1.15 l 3412.0124.26 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) 50 A @ 63 VAC, cos φ ≥ 0.99 / 50 A @ 63 VDC 2) 50 A @ 32 VAC, cos φ ≥ 0.99 / 50 A @ 32 VDC .xx = .11 .xx = .22 .xx = .24 .xx = .26 Blister Tape of 100 pcs. in Plastic Bag Blister Tape 18 cm Reel (1000 pcs.) Blister Tape 25.4 cm Reel (5000 pcs.) Blister Tape 33 cm Reel (15000 pcs.) 17.08.2020 Packaging Unit   4 Circuit Protection The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.