4300.5013

Power Entry Modules with Line Filter www.schurter.com/pg06 IEC Appliance Inlet C14 with Filter, Front or Rear side Mounting FGS Snap-In Version with quick connect terminals 6.3 x 0.8 mm Screw-On Version with quick connect terminals 6.3 x 0.8 mm Screw-On Version with flexible wires C14 70° C Description - Panel Mount: Snap-in or screw-on mounting from front or rear-side - 2 Functions: Appliance Inlet, Line-filter in standard version - Quick connect terminals or wires Characteristics - Compact design with optimal shielding - All single elements are already wired - For standard applications - Qualified for use in equipment according IEC/EN 60950 References Weblinks Approvals General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories - VDE License Number: 40004665 - UL License Number: E72928 Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) > 2.5 kV between L-N > 5 kV between L/N-PE -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals or wires Quick connect terminals 6.3 x 0.8 mm straight Screw max 8 mm Mounting screw torque max 0.5 Nm Snap-in 1 mm to 3 mm Aluminium 1.5-3 mm, steel 1-3 mm, not suitable for plastic material Thermoplastic, black, UL 94V-0 Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Standard Version, IEC 60939, UL 1283, EN 133 200, CSA C22.2 no. 8 Technical details > 3'100'000 h acc. to MIL-HB-217 F Line Filter Impulse Withstand Voltage Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s MTBF Material: Housing EMC Products  FGS www.schurter.com/pg06 Dimensions Snap-in, front side, quick connect terminals (57) max. 26 6.3x0.8 max. 44 (6.1) 57 mm Power Entry Modules with Line Filter max. 29.5 (21.3) 22.3 -0 +1 max. 34 (28.3) 28.4 +1 -0 R 3 ±0.1 0.8...3 mm X X Screw-on, rear side, quick connect terminal (23) (R4.8) max.52 (30.3) max.50 (R4.5) +0.5 3.2 R < 4.3 = 40 ±0.15 22 -0 +0.5 (22.2) (5) (57) (5) (21.1) Screw-on, rear side, flexible wires (23) (R4.8) max.52 (30.3) 150 ±0.10 max.50 (R4.5) +0.5 30.4 -0 (28.1) (40) 3.2 R < 4.3 = 40 ±0.15 22.3 -0 +0.5 blue yellow green (22.2) (4) (10) (21.1)  EMC Products 30.4 -0 (28.1) brown (40) Power Entry Modules with Line Filter www.schurter.com/pg06 Technical Data of Filter-Components Rated Current [A] 1 2 4 6 10 Inductances L [mH] 2 x 10 2x4 2 x 1.5 2 x 0.8 2 x 0.3 Capacitance CX [nF] 47 47 47 47 47 Capacitance CY [nF] 2.2 2.2 2.2 2.2 2.2 FGS Diagrams Standard version 1) Line 2) Load Attenuation Loss 1A Standard version - - - - differential mode _____ common mode 2A 4A 6A 10 A Variants Rated Current [A] 1 2 4 6 10 1 2 4 6 10 1 2 4 6 10 Mounting Snap-in Snap-in Snap-in Snap-in Snap-in Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Panel mounting Screw-on from front side Screw-on from front side Screw-on from front side Screw-on from front side Screw-on from front side Screw-on from rear side Screw-on from rear side Screw-on from rear side Screw-on from rear side Screw-on from rear side Screw-on from rear side Screw-on from rear side Screw-on from rear side Screw-on from rear side Screw-on from rear side Terminal Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Flexible wire 18 AWG Flexible wire 18 AWG Flexible wire 18 AWG Flexible wire 18 AWG Flexible wire 18 AWG Order Number 4300.5011 4300.5012 4300.5013 4300.5014 4300.5015 4300.5091 4300.5092 4300.5093 4300.5094 4300.5095 4300.5071 4300.5072 4300.5073 4300.5074 4300.5075 EMC Products  FGS www.schurter.com/pg06 Packaging unit Accessories Description Power Entry Modules with Line Filter 10 Pcs Assorted Covers Rear Cover 0859.0048 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to FGS Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to FGS Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to FGS 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092  The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.