4301.0023

Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole KEA Plug removal necessary for fuse replacement KEA KEA C14 70° C Description - Panel Mount: Screw-on version from front or rear side, snap-in version from front side - 3 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1- or 2-pole, with or without voltage selector (step switch) - Quick connect terminals 4.8 x 0.8 mm - Alternative: version with line filter KFA Characteristics - Available with or without internal connections - Plug removal necessary for fuse-link replacement The fuse drawer "Fingergrip" can be removed by hand For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front - Qualified for use in equipment according IEC/EN 60950 Other versions on request Approvals - VDE License Number: 40012272 - UL License Number: E93617 - CSA License Number: 38456 - With solder terminals - Fuse drawer with other voltage values - For protection class II References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Appliance Inlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves optional, step, 2-4 digits Fuseholder Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Voltage Selectors Material: Housing Connectors  KEA www.schurter.com/pg05 Dimensions Screw-on mounting type KEA ø 6.3x90˚ 2.2 2 2.2 Power entry modules without line filter Snap-in mounting type KEA 2 S ±0.1 44 mm 18 27.5 18 ø 3.2 4 41.4 27.5 4.8x0.8 R4 27.2 R2.5 36 ±0.1 4.8x0.8 R4 27.2 R2.5 230 +0.2 0 31.2 31.5 31.2 34 M3/ø3.6 0 +0.2 0 36 44 R2.5-0.2 27.5 30 R2.5-0.2 0 27.5 +0.2 0 Diagrams without internal connections Voltage selector 4-positions, 1-pole without internal connections Voltage selector 4-positions, 2-pole with internal connections Voltage selector 3-positions, 1-pole with internal connections Voltage selector 3-positions, 2-pole Voltage selector 2-positions 1-pole Voltage selector 2-positions 2-pole without voltage selector 1-pole without voltage selector 2-pole Derating Curves 1-pole Admissible power acceptance in Watt 2.0 2-pole Admissible power acceptance in Watt per pole 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In 1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Ambient air temperature Ta °C  Connectors 31.5 34 +0.2 0 R6 230 41.4 Power entry modules without line filter www.schurter.com/pg05 Variants Fingergrip and Extra-Safe Fuse drawer must be ordered separately Type KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA KEA Panel mounting Screw Screw Screw Screw Screw Screw Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Panel Thickness s [mm] 1.5 2 2.5 1.5 2 2.5 1.5 2 2.5 1.5 2 2.5 1.5 2 2.5 1.5 2 2.5 Fuseholder 1-pole 1-pole 1-pole 2-pole 2-pole 2-pole 1-pole 1-pole 1-pole 1-pole 1-pole 1-pole 1-pole 1-pole 1-pole 2-pole 2-pole 2-pole 2-pole 2-pole 2-pole 2-pole 2-pole 2-pole Voltage Selectors 3 pos. 3/4 digits without 3 pos. 3/4 digits without 3 pos. 3 pos. 3 pos. 3/4 digits 3/4 digits 3/4 digits without without without 3 pos. 3 pos. 3 pos. 3/4 digits 3/4 digits 3/4 digits without without without l l l l l l l l l l l l l l l Internally wired l Order Number 4301.0021 4301.2061 4301.0521 4301.0001 4301.2041 4301.0501 4301.0022 4301.0023 4301.0024 4301.2062 4301.2063 4301.2064 4301.0522 4301.0523 4301.0524 4301.0002 4301.0003 4301.0004 4301.2042 4301.2043 4301.2044 4301.0502 4301.0503 4301.0504 KEA Packaging unit Required Accessory 50 Pcs Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole, Voltage Selectors, 110, 150, 220 Fingergrip, 2-pole, Voltage Selectors, 120, 240 Fingergrip, 2-pole, Voltage Selectors, 110, 220 Fingergrip, 2-pole, Voltage Selectors, 115, 220 4301.1014.01 4301.1014.02 4301.1014.03 4301.1014.04 ... Connectors  KEA www.schurter.com/pg05 Accessories Power entry modules without line filter Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Flat head, A Countersunk, B 4700.0001 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to KEA Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to KEA Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to KEA 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092  The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.