4301.3211

Power entry modules without line filter KEA-Print www.schurter.com/pg05 Plug removal necessary for fuse replacement IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole for PCB KEA-Print KEA-Print C14 70° C Description - Panel Mount: Screw-on version from front or rear side, snap-in version from front side - 2 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1- or 2-pole - For PCB mounting Characteristics - All single elements are already wired - Plug removal necessary for fuse-link replacement The fuse drawer "Fingergrip" can be removed by hand For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front - Qualified for use in equipment according IEC/EN 60950 Approvals Other versions on request - VDE License Number: 40012272 - With solder terminals - Fuse drawer with other voltage values - For protection class II References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB 1,6 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Appliance Inlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Fuseholder Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Material: Housing Connectors  KEA-Print www.schurter.com/pg05 Dimensions Screw-on mounting type KEA-PRINT ø 6.3x90˚ 2.2 2 44 mm Power entry modules without line filter N 4 1-pole 3 18.9 ø 3.2 41.4 12.7 2-pole 5 3 20.3 R4 27.2 5.1 R2.5 36 ±0.1 31.2 M3/ø3.6 0 +0.2 0 36 44 Template grid 1/10" = 2.54 mm Drill. Ø: 3/5/N = Ø 1.3 + 0,1/0 Gnd = Ø 1.6 + 0,1/0 R2.5-0.2 27.5 Snap-in mounting type KEA-PRINT 2.2 2 N S ±0.1 1-pole 3 18.9 12.7 41.4 2-pole 5 3 20.3 R4 27.2 5.1 R2.5 31.2 36 R2.5-0.2 0 27.5 +0.2 0 Template grid 1/10" = 2.54 mm Drill. Ø: 3/5/N = Ø 1.3 + 0,1/0 Gnd = Ø 1.6 + 0,1/0  Connectors 31.5 34 +0.2 0 31.5 34 +0.2 0 R6 Power entry modules without line filter KEA-Print www.schurter.com/pg05 Diagrams with internal connections 1-pole with internal connections 2-pole (KEA-Print) (KEA-Print) Derating Curves 1-pole Admissible power acceptance in Watt 2.0 2-pole Admissible power acceptance in Watt per pole 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In 1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Ambient air temperature Ta °C Variants Fingergrip and Extra-Safe internal connections, fuse drawer must be ordered separately Type KEA-Print KEA-Print KEA-Print KEA-Print KEA-Print KEA-Print KEA-Print KEA-Print Panel mounting Screw Screw Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Panel Thickness s [mm] 1.5 2 2.5 1.5 2 2.5 Fuseholder 1-pole 2-pole 1-pole 1-pole 1-pole 2-pole 2-pole 2-pole Voltage Selectors without without without without without without without without Internally wired l l l l l l l l Order Number 4301.3211 4301.3201 4301.3212 4301.3213 4301.3214 4301.3202 4301.3203 4301.3204 Packaging unit Required Accessory 50 Pcs Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole Extra-Safe, 2-pole Fingergrip, 1-pole Extra-Safe, 1-pole 4301.1401 4301.1403 4301.1405 4301.1407 ... Connectors  KEA-Print www.schurter.com/pg05 Accessories Cord retaining kits Cord retaining strain relief Flat head, A Countersunk, B Power entry modules without line filter 4700.0001 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to KEA-Print Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to KEA-Print Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to KEA-Print 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092  The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.