KFA
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, optional Voltage Selector (step switch)
Screw-on mounting from front side
Version with ground line choke
without voltage selector
Screw-on mounting from rear side
without voltage selector
Screw-on mounting from rear side
without voltage selector
Flexible wire AWG18
C14
See below:
Approvals and Compliances
70° C
Description
Characteristics
Unique Selling Proposition
Other versions on request
- Panel mount :
Screw-on version from front or rear side, snap-in version front side
- 4 Functions :
Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm
1‑ or 2‑pole , with or without voltage selector (step switch) , Line filter
in standard and medical version
- V-Lock notch standard
- Quick connect terminals / wires
- Reduces noise on the ground wire
- Interrupts ground loops
- High asymmetrical attenuation
- V-Lock cord retaining
- Rear side mounting for efficient costsaving assembly
Suitable for assembly in metal plated plastic housings
- All single elements are already wired
- Plug removal necessary for fuse-link replacement
- Suitable for use in medical equipment according to IEC/UL 60601-1 (1
MOOP, 1 MOPP)
For applications according IEC/UL 62368-1 we recommend variants
with bleed resistor
- Capacity CX 100 nF
References
Alternative: version without line filter KEA
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product,
Microsite
Technical Data
Ratings IEC
Ratings UL/CSA
Leakage Current
Dielectric Strength
Allowable Operation Temperature
Climatic Category
IP-Protection
Protection Class
Terminal
Panel Thickness S
Material
1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz
standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
-25 °C to 85 °C
25/085/21 acc. to IEC 60068-1
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Quick connect terminals 6.3 x 0.8 mm
Flexible wire AWG18, 150 mm
Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 0.8 mm to 3 mm
Thermoplastic, black, UL 94V-0
Appliance inlet/-outlet
Fuseholder
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
Voltage Selector
Line Filter
MTBF
C14 acc. to IEC 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class I
1-/2-pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per
pole
Admissible power acceptance at higher
ambient temperature see derating curves
optional, step, 3 pos.
Standard and Medical Version, IEC
60939, UL 1283, CSA C22.2 no. 8
Technical Details
> 1'700'000 h acc. to MIL-HB-217 F
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
EMC Products
1
KFA
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: KFA
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40004665 (FKE, FKF, FKV, FKW)
UL Approvals
UL
UR File Number: E72928 (FKE, FKF, FKV, FKW)
CQC Approvals
CQC
CQC Certificate Number: 18001188536, 22001355038
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60939
Passive filters for suppressing electromagnetic interference
Designed according to
IEC 60127-6
Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to
IEC 61058-1
Switches for appliances. Part 1. General requirements
Designed according to
UL 498
Standard for Attachment Plugs and Receptacles
Designed according to
UL 1283
Electromagnetic interference filters
Designed according to
CSA C22.2 no. 42
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to
CSA C22.2 no. 8
Electromagnetic interference (EMI) filters
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Suitable for applications acc.
IEC 60601-1
Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Suitable for applications acc.
IEC 60335-1
Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
White Paper Glow wire test
SCHURTER AG
Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Medical Equipment
SCHURTER AG
Suitable for use in medical equipment according to IEC/UL 60601-1 (1
MOOP, 1 MOPP)
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
EMC Products
KFA
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Dimension [mm]
Filter with voltage selector
2.8
29 ±0.3
ø 6.3x90°
44
230
36
27.2
R3.1
M3/ø3.6
ø 3.2
6.3x0.8**
4.8x0.8*
36 ±0.15
R6
0
R4.5
R3 -0.2
31.2
56
34
69.2
+0.3
33 0
4.7
Snap-in mounting
0.8 - 3
33 max.
(27.4)
37 max.
(28.8)
0.15
29.35 + 0.00
0.15
33 + 0.00
37 max.
.1
±0
R3
R4
.1
5
32.8
(31.4)
9.5
46
60.5
Screw-on mounting from rear side
30
36
2.65
3.6
34.3 0
+0.20
36 ±0.15
32.8 x 28.5
9.6
R4
36.5
R4
M3
34
R 2.5
2.2
R5
31.2
27.2
9.5
46.8
4.2
30.3
+0.20
0
R4
60.5
44.3
EMC Products
3
KFA
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Screw-on mounting from front side with ground line choke
36 ±0.15
44
R5
Ø 3.25
R4
33
±0.3
0
M3 x 0.5
31.2
34
Ø 6.3
0
27.2
9.5
36
R3 -0.2
29 ±0.3
5
56
70.5
Screw-on mounting from front side
36 ±0.15
44
R5
Ø 3.25
R4
27.2
36
33
±0.3
0
M3 x 0.5
31.2
34
Ø 6.3
0
9.5
29 ±0.3
5
46
R3 -0.2
60.5
Technical Data of Filter-Components
Rated Current [A]
4
Filter-Type
Inductance L1/
L2 [mH]
Inductance L3
[mH]
Capacitance CX
[nF]
Capacitance CY
[nF]
R [MΩ]
1
Standard version
2 x 10
-
68
2.2
-
2
Standard version
2x4
-
68
2.2
-
4
Standard version
2 x 1.5
-
68
2.2
-
6
Standard version
2 x 0.8
-
68
2.2
-
10
Standard version
2 x 0.3
-
68
2.2
-
1
Standard Version with Ground Line Choke
2 x 10
0.6
100
2.2
-
2
Standard Version with Ground Line Choke
2x4
0.6
100
2.2
-
4
Standard Version with Ground Line Choke
2 x 1.5
0.6
100
2.2
-
6
Standard Version with Ground Line Choke
2 x 0.8
0.6
100
2.2
-
10
Standard Version with Ground Line Choke
2 x 0.3
0.15
100
2.2
-
1
Medical Version (M5)
2 x 10
-
68
-
1
2
Medical Version (M5)
2x4
-
68
-
1
4
Medical Version (M5)
2 x 1.5
-
68
-
1
6
Medical Version (M5)
2 x 0.8
-
68
-
1
10
Medical Version (M5)
2 x 0.3
-
68
-
1
1
Medical Version (M80)
2 x 10
-
68
0.47
1
2
Medical Version (M80)
2x4
-
68
0.47
1
4
Medical Version (M80)
2 x 1.5
-
68
0.47
1
6
Medical Version (M80)
2 x 0.8
-
68
0.47
1
EMC Products
KFA
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Rated Current [A]
Filter-Type
Inductance L1/
L2 [mH]
Inductance L3
[mH]
Capacitance CX
[nF]
Capacitance CY
[nF]
R [MΩ]
10
Medical Version (M80)
2 x 0.3
-
68
0.47
1
1
Medical Version (M5) with Ground Line Choke
2 x 10
0.6
100
-
1
2
Medical Version (M5) with Ground Line Choke
2x4
0.6
100
-
1
4
Medical Version (M5) with Ground Line Choke
2 x 1.5
0.6
100
-
1
6
Medical Version (M5) with Ground Line Choke
2 x 0.8
0.6
100
-
1
10
Medical Version (M5) with Ground Line Choke
2 x 0.3
0.15
100
-
1
Diagrams
Standard version
with voltage selector
Medical Version (M5)
with voltage selector
Standard version with ground line choke
L
3
2
1
X)
L
L1
1)
F1
Cy
PE
Cx
L2
N
Cy
L
2)
X)
L1
1)
PE’
PE
F2
5
3
2
1
X)
F1
L2
N
F2
X)
5
1) Line
2) Load
1) Line
2) Load
Medical Version (M5) with ground line choke
Medical Version (M80) with ground line choke
L’
F1
PE
2)
PE
F2
L2
N’
N
L1
Cx
Cy
R
L2
L3
L2
Cy
N’
1) Line
2) Load
Medical Version (M80)
with voltage selector
Cy
2)
PE’
L1
1)
PE
N’
F1
Cy
R
Cx
L2
N
1) Line
2) Load
3
2
1
X)
L
L3
1) Line
2) Load
Cx
F2
L’
F1
1)
PE’
R
Cx
F2
N
L
L1
PE’
L3
x) external connection to be made by the customer
L
2)
Cy
N
x) external connection to be made by the customer
1)
L1
PE
2)
PE’
R
Cx
L’
F1
1)
Cy
2)
PE’
X)
F2
5
x) external connection to be made by the customer
1) Line
2) Load
Medical Version (M80)
without voltage selector
L
L1
PE
Cx
F2
N
L
L’
F1
1)
Medical Version (M5)
without voltage selector
Cy
R
L2
Cy
2)
L’
F1
1)
L1
PE
PE’
N’
1) Line
2) Load
Cx
F2
N
Standard version
without voltage selector
PE’
R
1)
N
L’
F1
L1
Cy
PE
L2
N’
1) Line
2) Load
L
2)
F2
Cx
L2
Cy
2)
PE’
N’
1) Line
2) Load
Derating Curves
1-pole
1.6
1.4
1.2
1.0
I = 1.0 In
0.8
I = 0.7 In
0.6
I =
